Influence of BLT content on phase structure and electrical properties of (1-x)BT-xBLT ceramic

ผู้แต่ง

  • Navavan Thongmee Program of Physics, Faculty of science and technology, Pibulsongkram Rajabhat University
  • Rattiphorn Sumang Faculty of Science and Technology, Pibulsongkram Rajabhat University
  • Soodkhet Pojprapai School of ceramic engineering, Institute of Engineering, Suranaree Univeristy of Technology
  • T Klaytae Faculty of Science and Technology, Pibulsongkram Rajabhat University

คำสำคัญ:

BT-BLT, Ferroelectric properties, Dielectric properties, Hysteresis loop

บทคัดย่อ

(1-x)BaTiO3-x(Bi3.25La0.75)Ti3O12; (1-x)BT-xBLT ceramics with x = 0-0.20 wt.% were prepared by a solid-state reaction method. The BaTiO3 (BT) and (Bi3.25La0.75)Ti3O12 (BLT) powders were, respectively, calcined at 1100°C and 750°C for 4 h. The (1-x)BT-xBLT samples were sintered between 1250°C and 1350°C. The structure exhibited a transformation from tetragonal to orthorhombic with increasing in BLT contents. The average grain size increased with increasing BLT contents. The maximum density and relative density about 6.19 ± 0.07 g/cm3and 99.3% were obtained for the composition of 0.95BT-0.05BLT. The Curie temperature (Tc) continuously decreased with increase in BLT contents. The dielectric constant showed a broad peak and pronounced dependence on frequency, which implied an existence of the relaxor behavior. The hysteresis parameters such as saturation polarization (Ps~18.06 mC/cm2), remanent polarization (Pr~12.64 mC/cm2) and coercive field (Ec~11.09 kV/cm) can be improved when BLT content is increased to 0.05 wt.%.

Downloads

Download data is not yet available.

เอกสารอ้างอิง

S. B. Deshpande, P. D. Godbole, Y. B. Khollam, and H. S. Potdar, “Characterization of barium titanate: BaTiO3 (BT) ceramics prepared from sol-gel derived BT powders,” Journal of Electroceramics, vol. 15, pp. 103– 108, 2005. [2] T. Ramoška, J. Banys, R. Sobiestianskas, M. Vijatović Petrović, J. Bobić, and B. Stojanović, “Dielectric investigations of Ladoped barium titanate,” Processing and Application of Ceramics, vol. 4, pp. 193–198, 2010.

J. Zhu, C. Jin, W. Cao, and X. Wang, “Phase transition and dielectric properties of nanograin BaTiO3 ceramic under high pressure,” Applied Physics Letters, vol. 92, pp. 1-3, 2008.

M. Ganguly, S. K. Rout, C. W. Ahn, I. W. Kim, and K. Manoranjan, “Structural, electrical and optical properties of Ba(Ti1−xYb4x/3)O3 ceramics,” Ceramics International, vol. 39, pp. 9511–9524, 2013.

S. Garcia, R. Font, J. Portelles, R. J. Quinones, J. Heiras, and J. M. Siqueiros, “Effect of Nb doping on (Sr,Ba)TiO3 (BST) ceramic samples,” Journal of Electroceramics, vol. 6, pp. 101–108, 2001.

M. Aparna, T. Bhimasankaram, S. V. Suryanarayanan, G. Prasad, and G. S. Kumar, “Effect of lanthanum doping on electrical and electromechanical properties of BaTiO3,” Bulletin of Materials Science, vol. 24, pp. 497–504, 2001.

S. Chandarak, A. Ngamjarurojana, S. Srilomsak, P. Laoratanakul, S. Rujirawat, and R. Yimnirun, “Dielectric Properties of BaTiO3-Modified BiFeO3 Ceramics,” Ferroelectrics, vol. 410, pp. 75–81, 2011.

P. Ren, X. Wang, H. Fan, Y. Ren, and G. Zhao, “Structure, relaxation behaviours and nonlinear dielectric properties of BaTiO3– Bi(Ti0.5Mg0.5) O3 ceramics,” Ceramics International, vol. 41, pp. 7693–7697, 2015.

F. Si, T. Bin, Z. Fang, and S. Zhang, “Nb-doped 0.8BaTiO3-0.2Bi(Mg0.5Ti0.5)O3 ceramics with stable dielectric properties at high temperature,” Crystals, vol. 7, pp. 168, 2017.

P. K. Patel, J. Rani, N. Adhlakha, H. Singh, and K. L. Yadav, “Enhanced dielectric properties of doped barium titanate ceramics,” Journal of Physics and Chemistry of Solids, vol. 74, pp. 545–549, 2013.

G. Yao, X. Wang, Y. Yang, and L. Li, “Effects of Bi2O3 and Yb2O3 on the Curie temperature in BaTiO3-based ceramics,” Journal of the American Ceramic Society, vol. 93, pp. 1697–1701, 2010.

A. G. Murillo, F. J. C. Romo, M. G. Hernandez, J. R. Salgado, M. A. D. Crespo, S. A. P. Sanchez, and H. Terrones, “Structural and morphological characteristics of polycrystalline BaTiO3: Er3+, Yb3+ceramics synthesized by the sol–gel route: influence of chelating agents,” Journal of Sol-Gel Science and Technology, vol. 53, pp. 121–133, 2010.

J. Y. Han, and C. W. Bark. “Influence of calcination temperature on the structure and optical properties of Bi3.25La0.75Ti3O12 powders,” Journal of the Korean Physical Society, vol. 65, pp. 216-221, 2014.

J. Liu, and Z. Shen, “Dielectric, piezoelectric, and ferroelectric properties of grain orientated Bi3.25La0.75Ti3O12 ceramics,” Journal of Applied Physics, vol. 102, pp. 104- 107, 2007.

S. Ma, X. Cheng, J. Hao, W. Li, R. Chu, and Z. Xu, “Dielectric and ferroelectric properties of Ta-modified Bi3.25La0.75Ti3O12 ceramics,” Ceramics International, vol. 43, pp. 13193– 13198, 2017.

J. H. Park, J. S. Bae, B. C. Choi, and J. H. Jeong, “Impedance spectroscopy of Bi3.25La0.75Ti3O12 ceramics above and below ferroelectric transition temperatures,” Journal of Physics D: Applied Physics, vol. 40, pp. 579–583, 2007.

J. H. Park, J. S. Bae, B. C. Choi, and J. H. Jeong, “Effect of Nb doping of ferroelectric properties of Bi3.25La0.75Ti3O12 ceramics,” Journal of Applied Physics, vol. 97, pp. 064110, 2005.

J. Li, P. Li, G. Zhang, J. Yu, Y. Wu, and X. Wen, “The thickness effect of Bi3.25La0.75Ti3O12 buffer layer in PbZr0.58Ti0.42O3/Bi3.25La0.75Ti3O12 (PZT/BLT) multilayered ferroelectric thin films,” Thin Solid Films, vol. 519, pp. 6021–6025, 2011.

H. Xinyou, G. Chunhua, C. Xhigang, and L. Huiping, “Influence of composition on properties of BNT-BT lead-free piezoceramics,” Journal of Rare Earths, vol. 24, pp. 321-324, 2006.

J. Li, F. Wang, C. M. Leung, S. W. Or, Y. Tang, X. Chen, T. Wang, X. Qin, and W. Shi, “Large strain response in acceptor- and donordoped Bi0.5Na0.5TiO3-based lead-free ceramics,” Journal of Materials Science, vol. 46, pp. 5702–5708, 2011.

R. Sumang, T. Bongkarn, N. Kumar, and M. Kamnoy, “Investigation of a new lead-free (1-x-y)BNT-xBKT-yBZT piezoelectric ceramics,” Ceramics International, vol. 43, pp. 102–109, 2017.

B. Jaffe, W. R. Cook, and H. Jaffe, Piezoelectric Ceramics, London: Academic Press, 1971.

M. Cernea, G. Poli, G. V. Aldica, C. Berbecaru, B. S. Vasile, and C. Galassi, “Preparation and properties of nanocrystalline BNT-BT x piezoelectric ceramics by sol-gel and spark plasma sintering,” Current Applied Physics, vol. 12, pp. 1100-1105, 2012.

J. Y. Han, and C. W. Bark, “Tunable band gap of iron-doped lanthanum-modified bismuth titanate synthesized by using the thermal decomposition of a secondary phase,” Journal of the Korean Physical, vol. 66, pp. 1371-1375, 2015.

E. Mostafavi, and A. Ataie, “Fabrication and characterization of nanostructured Ba-doped BiFeO3 porous ceramics,” Materials Science-Poland, vol. 34, pp. 148-156, 2016.

Y. Tan, J. Zhang, Y. Wu, C. Wang, V. Koval, B. Shi, H. Ye, R. McKinnon, G. Viola, and H. Yan, “Unfolding grain size effects in barium titanate ferroelectric ceramics,” Scientific Reports, vol. 5, pp. 1-9, 2015.

H. B. Sharma, R. P. Tandon, A. Mansingh, and R. Rup. “Dielectric and piezoelectric properties of sol-gel-derived barium titanate ceramics,” Journal of Materials Science Letters, vol. 12, pp. 1795-1796, 1993.

E. Mostafavi, A. Ataie, M. Ahmadzadeh, M. Palizdar, T. P. Comyn, and A. J. Bell, “Synthesis of nano-structured Bi1-xBaxFeO3 ceramics with enhanced magnetic and electrical properties,” Materials Chemistry and Physics, vol. 163, pp. 106-112, 2015.

H. Maiwa, “Electrocaloric Properties of (Pb,La)(Zr,Ti)O3 and BaTiO3 Ceramics,” in Advanced Ceramic Processing, A. M. A. Mohamed, Eds., United Kingdom: IntechOpen, 2015, pp. 139-150.

W. Yunyi, Y. Jun, Z. Duanming, Z. Chaodan, Y. Bin, and W. Yunbo, “Effect of bismuth excess on the crystallization of Bi3.25La0.75Ti3O12 ceramic and thin Film,” Integrated Ferroelectrics, vol. 98, pp. 11–25, 2008.

ดาวน์โหลด

เผยแพร่แล้ว

2018-06-27

วิธีการอ้างอิง

[1]
N. Thongmee, R. Sumang, S. . Pojprapai, และ T. Klaytae, “Influence of BLT content on phase structure and electrical properties of (1-x)BT-xBLT ceramic”, J Met Mater Miner, ปี 28, ฉบับที่ 1, มิ.ย. 2018.

ฉบับ

ปีที่ 28 ฉบับที่ 1 (2018)

บท

Original Research Articles

การอนุญาต

ลิขสิทธิ์ (c) 2018 Journal of Metals, Materials and Minerals

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Authors who publish in this journal agree to the following terms:

    1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.

 

    1. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.