Corrosion behaviors of ship structural steel in simulated marine tidal environment
คำสำคัญ:
Marine tidal corrosion, EIS sensor, Corrosion rate, Ship structural steelsบทคัดย่อ
The tidal zone is severe marine environment for steel structures due to its wet-dry cyclic corrosion pattern. Regarding a specific application for inner ship hull, ship structural steel is always prone to corrosion dealing with three marine environments, including atmospheric, tidal, and immersion zones. Therefore, the current study aimed to investigate corrosion behaviors of two commercial ship structural steels, i.e. alloys A and B, which were exposed to simulated marine tidal environment. The effects of specimen arrangements designated as the isolated short-scale and vertical long-scale specimens were also determined. Based on weight loss determination, it revealed that the corrosion rates of isolated short steel specimens exposed in the tidal zone were almost two times larger than that of vertical long-scale steel specimen. In the tidal zone, the corrosion rates of isolated short-scale steel obtained from weight loss determination quite agreed with the EIS corrosion sensor results. Based on the corrosion resistance aspects, the alloy A is slightly better than the alloy B.Downloads
เอกสารอ้างอิง
N. D. Tomashov, "Development of the electrochemical theory of metallic corrosion," Corrosion, vol. 20, pp. 7-14, 1964.
Y. Tang, J. Cao, S. Qu, L. Quan, X. Zhao, and Y. Zuo "Degradation of a high build epoxy primer/polyurethane composite coatings under cyclic wet–dry conditions," International Journal of Electrochemical Science, vol. 13, pp. 3874 – 3887, 2018.
E. Bardal, Corrosion and Protection. London: Springer-Verlag London Limited, 2003.
M. Xin, W. Jie, D. Junhua, and K. Wei, "In situ corrosion monitoring of mild steel in a simulated tidal zone without marine fouling attachment by electrochemical impedance spectroscopy," Journal of Materials Science & Technology, vol. 30, pp. 1043-1050, 2014.
B. R. Hou, J. L. Zhang, H. Y. Sun, Y. Li, and B. Xiang, "Corrosion of C–Mn steel in simulated tidal and immersion zones," British Corrosion Journal, vol. 36, pp. 310-312, 2001.
ASTM A131, Standard Specification for Structural Steel for Ships, The American Society for Testing and Material, 2004.
ISO 8501-1, Rust grades and preparation of uncoated steel substrates and steel substrates after overall removal of previous coatings, International Organization for Standardization, 2007.
ASTM G1, Standard Practice for Preparing, Cleaning, and Evaluating Corrosion Test Specimens, The American Society for Testing and Materials, 1999.
ASTM G3, Standard Practice for Conventions Applicable to Electrochemical Measurementsin Corrosion Testing, The American Society for Testing and Material, 1999.
A. P. Yadav, A. Nishikata, and T. Tsuru, "Electrochemical impedance study on galvanized steel corrosion under cyclic wet– dryconditions-influence of time of wetness," Corrosion Science, vol. 46, pp. 169-181, 2004.
X. X. Fu, J. H. Dong, E. H. Han, and W. Ke, "A new experimental method for in situ corrosion monitoring under alternate wet-dry conditions," Sensors (Basel), vol. 9, pp. 10400-10410, 2009.
A. Nishikata, Y. Ichihara, and T. Tsuru, "An apprication of electrochemical impedance spectroscopy to atmospheric corrosion study," Corrosion Science, vol. 37, pp. 897- 911, 1995.
R. Jeffrey and R. E. Melchers, "Effect of vertical length on corrosion of steel in the tidal zone," Corrosion, vol. 65, pp. 695-702, 2009.
ASTM G102, Standard Practice for Calculation of Corrosion Rates and Related Information from Electrochemical Measurements, The American Society for Testing and Materials, 1999.
T. Tsuru, S. Haruyama, and B. Gijutu, "Corrosion monitor based on impedance method; construction and its application to homogeneous corrosion," Japan Society of Corrosion Engineering, vol. 27, pp. 573-579, 1978.
ดาวน์โหลด
เผยแพร่แล้ว
วิธีการอ้างอิง
ฉบับ
บท
การอนุญาต
ลิขสิทธิ์ (c) 2019 Journal of Metals, Materials and Minerals
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Authors who publish in this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
