The influence of precursors on optical properties of carbon nanodots synthesized via hydrothermal carbonization technique

ผู้แต่ง

  • Kamonwan Aup-Ngoen Materials and Nondestructive Testing Laboratory, King Mongkut's University of Technology Thonburi (Ratchaburi)
  • Mai Noipitak Materials and Nondestructive Testing Laboratory, King Mongkut's University of Technology Thonburi (Ratchaburi)
  • Nant Nammahachak Faculty of Engineering, King Mongkut’s University of Technology Thonburi
  • Sutatch Ratanaphan Faculty of Engineering, King Mongkut’s University of Technology Thonburi
  • Chatwarin Poochai Graphene and Printed Electronics for Dual- Use Applications Research Division (GPERD), Nation Security and Dual- Use Technology Center (NSD)
  • Adisorn Tuantranont Graphene and Printed Electronics for Dual- Use Applications Research Division (GPERD), Nation Security and Dual- Use Technology Center (NSD)

คำสำคัญ:

Carbon nanodots, Hydrothermal carbonization, Optical properties, Precursors

บทคัดย่อ

Carbon nanodots (CDs) have drawn much attention due to their potential applications in optoelectronic devices, bioimaging, biosensor, and hole transporting materials for a perovskite solar cell. In this work, CDs were synthesized from natural mono- or disaccharide precursors (glucose, fructose, and sucrose) via a hydrothermal carbonization technique with the addition of ethanol or acetone. Structural and morphology of CDs were investigated using transmission electron microscopy and selected area electron diffraction. The average particle size of CDs was in the range 4.86-9.99 nm. The optical properties of CDs were characterized by UV-Visible spectroscopy and Fluorescence spectroscopy. The absorbance intensity of CDs increased with increasing precursor concentration. In the present work, the influences of precursors with addition of acetone on the optical properties of CDs were investigated and discussed the possible reason. The results revealed the improvement on the absorbance of CDs synthesized using a sucrose precursor. Additionally, the CDs showed the shifted fluorescence peaks when excited at different excitation wavelengths, indicating the excitation wavelength-dependent emission properties of CDs. FTIR spectra show that the CDs surface containing double bonded oxygen functional groups (C=O) formed during the hydrothermal carbonization of fructose and sucrose precursor, which is not found in glucose-derived CDs. Oxidation, reduction potentials and band gaps of CDs were also analyzed using the cyclic voltammograms (CV). The as-prepared CDs in diluted ethanol presented slightly difference of the HOMO and LUMO energy when compared with the CDs synthesized in diluted acetone.

Downloads

Download data is not yet available.

เอกสารอ้างอิง

D. R. S. Souza, L. D. Caminhas, J. P. Mesquita, and F. V. Pereira, “Luminescent carbon dots obtained from cellulose,” Materials Chemistry and Physics, vol. 203, pp. 148-155, 2018.

R. Miao, Z. Luo, W. Zhong, S. Chen, T. Jiang, B. Dutta, Y. Nasr, Y. Zhang, S., and L. Suib, “Mesoporous TiO2 modified with carbon quantum dots as a high- performance visible light photocatalyst,” Applied Catalysis B: Environmental, vol. 189, pp. 26-38, 2016.

A. Gupta, N. C. Verma, S. Khan, S. Tiwari, A. Chaudhary, and C. K. Nandi, “Paper strip based and live cell ultrasensitive lead sensor using carbondots synthesized from biological media,” Sensors and Actuators B, vol. 232, pp. 107-114, 2016

T. V. Tam, N. B. Trung, H. R. Kim ,J. S. Chung, and W. M. Choi, “One-pot synthesis of N- doped graphene quantum dots as a fluorescent sensing platform for Fe3+ ions detection,” Sensors and Actuators B, vol. 202, pp. 568-573, 2014.

Y. Wang, L. Bao, Z. Liu, and D. Pang, “Aptamer Biosensor Based on Fluorescence Resonance Energy Transfer from Upconverting Phosphors to Carbon Nanoparticles for Thrombin Detection in Human Plasma,” Analytical Chemistry, vol. 83, pp. 8130-8137, 2011.

J. Hou, G. Dong, Z. Tian, J. Lu, Q. Wanga, S. Ai, and M. Wang, “A sensitive fluorescent sensor for selective determination of dichlorvos based on the recovered fluorescence of carbon dots-Cu(II) system,” Food Chemistry, vol. 202, pp. 81-87, 2016.

S. Paulo, G. Stoica, W. Cambarau, E. M. Ferrero, and E. Palomares, “Carbon quantum dots as new hole transport material for perovskite solar cells,” Synthetic Metals, vol. 222, pp. 17-22, 2016.

H. K. Sadhanala, J. Khatei, and K. K. Nanda, “Facile hydrothermal synthesis of carbon nanoparticles and possible application as white light phosphors and catalysts for the reduction of nitrophenol, RSC Advances Communication, vol. 4, pp. 11481-11485, 2014.

G. Panomsuwan, N. Saito, and T. Ishizaki, “Electrocatalytic oxygen reduction activity of boron-doped carbon nanoparticles synthesized via solution plasma process,” Electrochemistry Communications, vol. 59, pp. 81-85, 2015.

J. F. Y. Fong, S. F. Chin, and S. Muk Ng, “Facile synthesis of carbon nanoparticles from sodium alginate viaultrasonic- assisted nanoprecipitation and thermal acid dehydrationfor ferric ion sensing,” Sensors and Actuators B, vol. 209, pp. 997-1004, 2015.

S. Yao, Y. Hu, and G. Li, “Flowing electrolytic synthesis of fluorescent carbon nanoparticles and carbon nanosheets,” Electrochimica Acta, vol. 155, pp. 305-311, 2015.

P. Suvarnaphaet, C. S. Tiwary, J. Wetcharungsri, S. Porntheeraphat, R. Hoonsawat, P. M. Ajayan, I-M. Tang, and P. Asanithi, “Blue photoluminescent carbon nanodots from limeade,” Materials Science and Engineering C, vol. 69, pp. 914- 921, 2016.

H. Li, X. He, Y. Liu, H. Huang, S. Lian, S. Lee, and Z. Kang, “One-step ultrasonic synthesis of water-soluble carbon nanoparticles with excellent photoluminescent properties,” Carbon, vol. 49, pp, 605 -609, 2011.

S. Hu, Q. Chang, K. Lin, and J. Yang, “Tailoring surface charge distribution of carbon dots through heteroatoms for enhanced visible- light photocatalytic activity,” Carbon, vol. 105, pp. 484-489, 2016.

R. Mohan, J. Drbohlavova, and J. Hubalek, “Dual band emission in carbon dots,” Chemical Physics Letters, vol. 692, pp. 196-201, 2018.

N. Papaioannou, A. Marinovic, N. Yoshizawa, A. E. Goode, M. Fay, A. Khlobystov, M. Titirici, and A. Sapelkin, “Structure and solvents effects on the optical properties of sugarderived carbon nanodots,” Scientific Reports, vol. 8, Article number: 6559., 2018.

L. Sai, S. Liu, X. Qian, Y. Yu, and X. Xu, “Nontoxic fluorescent carbon nanodot serving as a light conversion material in plant for UV light utilization,” Colloids and Surfaces B: Biointerfaces, vol. 169, pp. 422-428, 2018.

R. Wang, X. Wang, and Y. Sun, “One- step synthesis of self-doped carbon dots with highly photoluminescence as multifunctional biosensors for detection of iron ions and pH,” Sensors and Actuators B: Chemical, vol. 241, pp. 73-79. 2017.

L. Li, X. Wang, Z. Fu, and F. Cui, “One-step hydrothermal synthesis of nitrogen- and sulfurco- doped carbon dots from ginkgo leaves and application in biology,” Materials Letters, vol. 196, pp. 300-303, 2017.

ดาวน์โหลด

เผยแพร่แล้ว

2019-09-30

วิธีการอ้างอิง

[1]
K. Aup-Ngoen, M. Noipitak, N. . Nammahachak, S. Ratanaphan, C. Poochai, และ A. Tuantranont, “The influence of precursors on optical properties of carbon nanodots synthesized via hydrothermal carbonization technique”, J Met Mater Miner, ปี 29, ฉบับที่ 3, ก.ย. 2019.

ฉบับ

ปีที่ 29 ฉบับที่ 3 (2019)

บท

Original Research Articles

การอนุญาต

ลิขสิทธิ์ (c) 2019 Journal of Metals, Materials and Minerals

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Authors who publish in this journal agree to the following terms:

    1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.

 

    1. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.