Vol. 29 No. 4 (2019)

Published: 2019-12-26

Original Research Articles

  • Improvement in the properties of silica-reinforced natural rubber with the sustainable interfacial modifier: Effect of molecular weight and content of interfacial modifier

    Kavichat Katueangngan, Tulyapong Tulyapitak, Anuwat Saetung, Siriwat Soontaranon, Nattapong Nithi-uthai
    DOI: https://doi.org/10.55713/jmmm.v29i4.470

  • Study on mechanical and viscoelastic behavior of carbon nanotube (CNT) reinforced Epofine1564 nanocomposite

    Puneet Kumar, Jonnalagadda Srinivas
    DOI: https://doi.org/10.55713/jmmm.v29i4.512

  • Utilization of lignite ash as raw materials for ceramic tile

    Mateekul Jiarawattananon, Thanakorn Wasanapiarnpong, Charusporn Mongkolkachit
    DOI: https://doi.org/10.55713/jmmm.v29i4.475

  • Production and characterization of SiC reinforced aluminum alloy matrix composites from waste beverages cans

    Özgür Yilmaz, Bilgehan Cem Turan, Mevlüt Gürbüz
    DOI: https://doi.org/10.55713/jmmm.v29i4.535

  • Effects of crosslinking agent and biological properties of silk fibroin/gelatin/chitosan ternary system electrospun nanofiber mats.

    Pornpen Siridamrong, Narong Lumbikananda, Somporn Swasdison, Manunya Okhawilai, Niyom Thamrongananskul
    DOI: https://doi.org/10.55713/jmmm.v29i4.478

  • Utilization of RHA in development of hybrid composite by electromagnetic stir casting technique using RSM

    Shashi Prakash Dwivedi, Garima Dwivedi
    DOI: https://doi.org/10.55713/jmmm.v29i4.538

  • Effects of the chemical treatment on coal-fired bottom ash for the utilization in fiber-reinforced cement composites

    Passakorn Sonprasarn, Parinya Chakartnarodo, Pitcharat Ineure, Wichit Prakaypan
    DOI: https://doi.org/10.55713/jmmm.v29i4.488

  • Composition of CNT and WO3 nanoplate: synthesis and NH3 gas sensing characteristics at low temperature

    Xuan Vuong Le, Vu Truong Duong, Lan Anh Luu THI, Van Thang Pham, Huu Lam Nguyen, Cong Tu Nguyen
    DOI: https://doi.org/10.55713/jmmm.v29i4.539

  • Effects of surface modification processes on the adhesion of hydroxyapatite layers coated onto titanium substrates

    Oratai Jongprateep, Benjaporn Inseemeesak, Ratchatee Techapiesancha-Roenkij, Ampika Bansiddhi, Monchanok Vijarnsorn
    DOI: https://doi.org/10.55713/jmmm.v29i4.489

  • Mechanical properties and microstructure of hybrid vulcanized natural rubber filled with carbon black and nano-CaCO3 from Achatina achatina Shells

    Reginald Umunakwe, Akinlabi Oyetunji, Benjamin Omotayo Adewuyi; Wilson Uzochukwu Eze; Uzoma Samuel Nwigwe, Ifeoma Janefrances Umunakwe
    DOI: https://doi.org/10.55713/jmmm.v29i4.555

  • Reducing water absorption of fiber-cement composites for exterior applications by crystal modification method

    Parinya Chakartnarodom, Nuntaporn Kongkajun, Nutthita Chuankrerkkul, Pitcharat Ineure, Wichit Prakaypan
    DOI: https://doi.org/10.55713/jmmm.v29i4.496

  • Failure analysis of superheat tube 2.25Cr-1Mo in biomass power plant

    Boonhlua Khwansri, Mai Noipitak, Viboon Tangwarodomnukun
    DOI: https://doi.org/10.55713/jmmm.v29i4.500

  • Highly ordered porous PLA films prepared by breath figure method

    Charasphat Preuksarattanawut, Ekkasit Nisaratanaporn, Krisana Siralertmukul
    DOI: https://doi.org/10.55713/jmmm.v29i4.536

  • Microstructures and mechanical properties of 25Cr duplex stainless steel

    Chatchai Meena, Vitoon Uthaisangsuk
    DOI: https://doi.org/10.55713/jmmm.v29i4.550

  • Electrodeposition of Zn/TiO2 composite coatings for anode materials of Zinc ion battery

    Kittima Lolupiman, Panyawat Wangyao, Jiaqian Qin
    DOI: https://doi.org/10.55713/jmmm.v29i4.652