Composition of CNT and WO<sub>3</sub> nanoplate: synthesis and NH<sub>3</sub> gas sensing characteristics at low temperature
DOI:
https://doi.org/10.55713/jmmm.v29i4.539คำสำคัญ:
Carbon nanotube, Tungsten oxide nanoplate, Nanocomposite, Room temperature sensorบทคัดย่อ
WO3 nanoplate synthesized by acid precipitation method was composited with commercial carbon nanotube with different weight percents (0.5, 1.0, and 1.5 wt% of CNT). The ammonia gas sensing characteristics of composite materials at low temperature (50°C) were investigated and compared with that of pristine materials (WO3 nanoplate, commercial carbon nanotube). The results showed that the composition enhanced the gas sensing properties in comparison with the pristine carbon nanotube-based sensor and more stable than pristine WO3 nanoplate-based sensor. The response of gas sensors to 30 ppm of ammonia got the highest value of 45% in 0.5 wt%-CNT sensor – enhanced 100 times in comparison with carbon nanotube-based sensor. The calculated limit of detection of 0.5 wt%CNT/WO3 sensor was at sub-trace-level of 3 ppb. This enhancement shows the high applicability of composite materials in gas sensor working at room temperature.
Downloads
เอกสารอ้างอิง
S. Abdulla, D. V. Ponnuvelu, and B. Pullithadathil, “Rapid, trace-level ammonia gas sensor based on surface-engineered Ag nanoclusters@polyaniline/multiwalled carbon nanotubes and insights into their mechanistic pathways,” Chemistry Select, vol. 2, pp. 4277-4289, 2017. DOI: https://doi.org/10.1002/slct.201700459
P. T. Moseley, “Progress in the development of semiconducting metal oxide gas sensors: A review,” Measurement Science and Technology, vol. 28, p. 82001, 2017. DOI: https://doi.org/10.1088/1361-6501/aa7443
J. Li, Y. Lu, Q. L. Ye, J. Han, and M. Meyyappan, “Carbon nanotube based chemical sensors for gas and vapor detection,” Nano Letters, vol. 3, pp. 929-933, 2003. DOI: https://doi.org/10.1021/nl034220x
D. Zhang, Z. Wu, P. Li, X. Zong, G. Dong, and Y. Zhang, “Facile fabrication of polyaniline/ multi-walled carbon nanotubes/molybdenum disulfide ternary nanocomposite and its highperformance ammonia-sensing at room temperature,” Sensors and Actuators B: Chemical, vol. 258, pp. 895-905, 2018. DOI: https://doi.org/10.1016/j.snb.2017.11.168
A. G. Bannov, O. Jasek, A. Manakhov, M. Marik, D. Necas, and L. Zajickova, “Highperformance ammonia gas sensors based on plasma treated carbon nanostructures,” IEEE Sensors Journal, vol. 17, no. 7, pp. 1964-1970, 2017. DOI: https://doi.org/10.1109/JSEN.2017.2656122
J. Zhang, X. Liu, G. Neri, and N. Pinna, “Nanostructured materials for roomtemperature gas sensors,” Advanced Materials, vol. 28, pp. 795-831, 2016. DOI: https://doi.org/10.1002/adma.201503825
L. Q. Nguyen, P. Q. Phan, H. N. Duong, C. D. Nguyen, and L. H. Nguyen, “Enhancement of NH3 gas sensitivity at room temperature by carbon nanotube-based sensor coated with Co nanoparticles,” Sensors, vol. 13, pp. 1754- 1762, 2013. DOI: https://doi.org/10.3390/s130201754
M. M. Rana, D. S. Ibrahim, M. R. Mohd Asyraf, S. Jarin, and A. Tomal, “A review on recent advances of CNTs as gas sensors,” Sensor Review, vol. 37, pp. 127-136, 2017. DOI: https://doi.org/10.1108/SR-10-2016-0230
P. Muthukumaran, C. Sumathi, J. Wilson, C. Sekar, S. G. Leonardi, and G. Neri, “Fe2O3/ Carbon nanotube-based resistive sensors for the selective ammonia gas sensing,” Sensor Letters, vol. 12, pp. 17-23, 2014. DOI: https://doi.org/10.1166/sl.2014.3220
L. Xue, W. Wang, Y. Guo, G. Liu, and P. Wan, “Flexible polyaniline/carbon nanotube nanocomposite film-based electronic gas sensors,” Sensors and Actuators B: Chemical, vol. 244, pp. 47-53, 2017. DOI: https://doi.org/10.1016/j.snb.2016.12.064
Z. F. Huang, J. Song, L. Pan, X. Zhang, L. Wang, and J. J. Zou, “Tungsten oxides for photocatalysis, electrochemistry, and phototherapy,” Advanced Materials, vol. 27, pp. 5309-5327, 2015. DOI: https://doi.org/10.1002/adma.201501217
M. D’Arienzo, L. Armelao, C. M. Mari, S. Polizzi, R. Fuffo, R. Scotti, and F. Morazzoni, “Surface interaction of WO3 nanocrystals with NH3. Role of the exposed crystal surfaces and porous structure in enhancing the electrical response,” RSC Advances, vol. 4, pp. 11012- 11022, 2014. DOI: https://doi.org/10.1039/c3ra46726k
C. Y. Ng, K. Abdul Razak, and Z. Lockman, “Effect of annealing on acid-treated WO3·H2O nanoplates and their electrochromic properties,” Electrochimica Acta, vol. 178, pp. 673-681, 2015. DOI: https://doi.org/10.1016/j.electacta.2015.08.069
T. Sanasi, S. Pinitsoontorn, M. Horprathum, P. Eiamchai, C. Chananonnawathorn, and W. Hinchreeranun, “Development of WO3 nanostructure by acid treatment and annealing,” Journal of Metals Materials and Minerals, vol. 27, pp. 6-11, 2017.
M. F. Daniel, B. Desbat, J. C. Lassegues, B. Gerand, and M. Figlarz, “Infrared and Raman study of WO3 tungsten trioxides and WO3.xH2O tungsten trioxide hydrates,” Journal of Solid State Chemistry, vol. 67, pp. 235-247, 1987. DOI: https://doi.org/10.1016/0022-4596(87)90359-8
C. V Ramana, S. Utsunomiya, R. C. Ewing, C. M. Julien, and U. Becker, “Structural stability and phase transitions in WO3 thin films,” Journal of Physical Chemistry B, vol. 110, pp. 10430-10435, 2006. DOI: https://doi.org/10.1021/jp056664i
M. S. Dresselhaus, A. Jorio, and R. Saito, “Characterizing graphene, graphite, and carbon nanotubes by Raman spectroscopy,” Annual Review of Condensed Matter Physics, vol. 1, no. 1, pp. 89-108, 2010. DOI: https://doi.org/10.1146/annurev-conmatphys-070909-103919
L. Bokobza and J. Zhang, “Raman spectroscopic characterization of multiwall carbon nanotubes and of composites,” Express Polymer Letters, vol. 6, pp. 601-608, 2012. DOI: https://doi.org/10.3144/expresspolymlett.2012.63
Y. Wei, M. Hu, D. Wang, W. Zhang, and Y. Qin, “Room temperature NO2- sensing properties of porous silicon/tungsten oxide nanorods composite,” Journal of Alloys and Compounds, vol. 640, pp. 517-524, 2015. DOI: https://doi.org/10.1016/j.jallcom.2015.03.219
D. Nguyen Dac, V. Dang Duc, and C. Nguyen Duc, “Hydrothermal synthesis and NH3 gas sensing property of WO3 nanorods at low temperature,” Advances in Natural Sciences: Nanoscience and Nanotechnology, vol. 6, pp. 035006-035011, 2015. DOI: https://doi.org/10.1088/2043-6262/6/3/035006
W. Yan, M. Hu, P. Zeng, S. Ma, and M. Li, “Room temperature NO2-sensing properties of WO3 nanoparticles/porous silicon,” Applied Surface Science, vol. 292, pp. 551-555, 2014. DOI: https://doi.org/10.1016/j.apsusc.2013.11.169
ดาวน์โหลด
เผยแพร่แล้ว
วิธีการอ้างอิง
ฉบับ
บท
การอนุญาต
ลิขสิทธิ์ (c) 2019 Journal of Metals, Materials and Minerals
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Authors who publish in this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
