Effect of amorphous rice husk silica addition on the structure of asphalt composite

Simon Sembiring; Agus Riyanto; Rudy  Situmeang; Zipora SEMBIRING; Nita Susanti; Iqbal Firdaus

doi:10.55713/jmmm.v30i4.659

ผู้แต่ง

Simon Sembiring Department of Physics, Faculty of Mathematics and Natural Sciences, Lampung University, Street. Prof. Soemantri Brojonegoro No.1 Bandar Lampung, 35145, Indonesia http://orcid.org/0000-0002-6499-0598
Agus Riyanto Department of Physics, Faculty of Mathematics and Natural Sciences, Lampung University, Street. Prof. Soemantri Brojonegoro No.1 Bandar Lampung, 35145, Indonesia
Rudy Situmeang Department of Chemistry, Faculty of Mathematics and Natural Sciences, Lampung University, Street Prof. Soemantri Brojonegoro No. 1 Bandar Lampung, 35145, Indonesia
Zipora SEMBIRING Department of Chemistry, Faculty of Mathematics and Natural Sciences, Lampung University, Street Prof. Soemantri Brojonegoro No. 1 Bandar Lampung, 35145, Indonesia
Nita Susanti Department of Physics, Faculty of Mathematics and Natural Sciences, Lampung University, Street. Prof. Soemantri Brojonegoro No.1 Bandar Lampung, 35145, Indonesia
Iqbal Firdaus Department of Physics, Faculty of Mathematics and Natural Sciences, Lampung University, Street. Prof. Soemantri Brojonegoro No.1 Bandar Lampung, 35145, Indonesia

DOI:

https://doi.org/10.55713/jmmm.v30i4.659

คำสำคัญ:

Rice husk, Silica, Asphalt, Microstructure, Structure

บทคัดย่อ

In this study, modified asphalt composites were produced by adding silica extracted from rice husk. The mass ratios of asphalt to silica are 1:0, 1:1.6, 1:1.8, and 1:2 and calcined at the temperature of 150°C for 6 h. The structural and microstructural characteristics of asphalt composites were examined by x-ray diffraction (XRD), Scanning Electron Microscopy/Energy Dispersive x-ray (SEM-EDX) Spectroscopy and Differential Thermal Analysis (DTA-TGA), respectively. The XRD study revealed that the major phases were carbon and amorphous silica. The surface morphology of asphalt without silica addition presents a cluster of larger size than the cluster of asphalt with an addition of silica. The addition of silica significantly increased the thermal stability of the asphalt due to the formation of a physically cross-linked silica network structure. DTA/TGA analyses produced that temperature decomposition increased with the increasing silica addition from 230℃ to 315°C. Based on these characteristics, the samples are considered for the roof material, suggesting their potential use in substitute lightweight steel roof devices.

Downloads

Download data is not yet available.

ประวัติผู้แต่ง

Simon Sembiring, Department of Physics, Faculty of Mathematics and Natural Sciences, Lampung University, Street. Prof. Soemantri Brojonegoro No.1 Bandar Lampung, 35145, Indonesia

Department of Physics FMIPA University of Lampung

เอกสารอ้างอิง

F. Zhang, and J.Y. Yu, “The research for high-performance SBR compound modified asphalt,” Construction and Building Materials, vol. 24, pp. 410-418, 2010. DOI: https://doi.org/10.1016/j.conbuildmat.2009.10.003

Y. Yang, and Y. Cheng, “Preparation and performance of asphalt compound modified with waste crumb rubber and waste polyethylene,” Advances in Materials Science and Engineering, vol. 2016, pp.1-6, 2016. DOI: https://doi.org/10.1155/2016/5803709

C.Q. Fang, L.N. Jiao, and J.B. Huetal, “Viscoelasticity of asphalt modified with packaging waste expended polystyrene,” Journal of Materials Science and Technology, vol. 30, pp. 939-943, 2014. DOI: https://doi.org/10.1016/j.jmst.2014.07.016

S. Hinislioglu and E. Agar, “Use of waste high density polyethylene as bitumen modifier in asphalt concrete mix,” Materials Letters, vol. 58, pp. 267-271, 2004. DOI: https://doi.org/10.1016/S0167-577X(03)00458-0

H. Wang, Z.P. You, J.L. Mills-Beale, and P.W. Hao, “Laboratory evaluation on high temperature viscosity and low temperature stiffness of asphalt binder with high percent scrap tire rubber,” Construction and Building Materials, vol. 26, pp. 583-590, 2012. DOI: https://doi.org/10.1016/j.conbuildmat.2011.06.061

M. Arabani, S.M. Mirabdolazimi, and A.R. Sasani, “The effect of waste tire thread mesh on the dynamic behaviour of asphalt mixtures,” Construction and Building Materials, vol. 24, pp. 1060-1068, 2010. DOI: https://doi.org/10.1016/j.conbuildmat.2009.11.011

M. Enieb and A. Diab, “Characteristics of asphalt binder and mixture containing nanosilica,” International Journal of Pavement Research and Technology, vol. 10, pp. 148-157, 2017. DOI: https://doi.org/10.1016/j.ijprt.2016.11.009

S.I. Sarsam, “Effect of nano materials (Silica Fumes and Hydrated lime) on rheological and physical properties of asphalt cement,” in the Third International Scientific Conference, ME3-CM01, University of Babylon-Hilla-Babylon- IRAQ, 2015.

H. Ezzat, S. El-Badawy, A. Gabr, I.Z. El-Saaid, and T. Breakah, “Evaluation of asphalt binders modified with nanoclay and nanosilica,” Procedia Engineering, vol. 143, pp. 1260-1267, 2016. DOI: https://doi.org/10.1016/j.proeng.2016.06.119

J. Yang, and S. Tighe, “A review of advances of nanotechnology in asphalt mixtures,” Procedia-Social and Behavioral Sciences, vol. 96, pp. 1269-1276, 2013. DOI: https://doi.org/10.1016/j.sbspro.2013.08.144

C. Kai, W. Xu, D. Chen, and F. Huimin, “High- and low-temperature properties and thermal stability of silica fume/ SBS composite-modified asphalt mortar,” Advances in Materials Science and Engineering, vol. 2018, pp. 1-8, 2018. DOI: https://doi.org/10.1155/2018/1317436

Y.Q. Tan, L.Y. Shan, and J. Fang, “Anti-cracking mechanism of diatomite asphalt and diatomite asphalt mixture at low temperature,” Journal of Southeast University, vol. 25, pp. 74-78, 2009.

M.M. Haslinawati, K.A. Matori, Z.A. Wahab, H.A.A. Sidek, A.T. Zainal, “Effect of temperature on ceramic from rice husk ash,” International Basic & Applied Science, vol. 09, pp. 22-25, 2009.

E. Rafieel, S. Shahebrahimi, M. Feyzil, and M. Shaterzadeh, “Optimization of synthesis and characterization of nanosilica produced from rice husk (a common waste material),” International Nano Letters, vol. 2, pp. 1-8, 2012. DOI: https://doi.org/10.1186/2228-5326-2-29

B.I. Ugheoke and O.A. Mamat, “A Novel method for high volume production of nano silica from rice husk: process development and product characteristics,” International Material Enggineering Innovation, vol. 3, pp. 139-155, 2012. DOI: https://doi.org/10.1504/IJMATEI.2012.046898

K. Amutha, R. Ravibaskar and G. Sivakumar, “Extraction, synthesis and characterization of nanosilica from rice husk ash,” International nano Technology and Application, vol. 4 pp. 61-66, 2010.

L.N.A. Tuan, L.T.K. Dung, L.D.T. Ha, N.Q. Hien, D.V. Phu, B.D. Du, “Preparation and characterization of nanosilica from rice husk ash by chemical treatment combined with calcination,” Vietnam Journal of Chemistry, vol. 55, pp. 446-455, 2017. DOI: https://doi.org/10.15625/2525-2321.2017-00490

T.H. Liou and C.C. Yang, “Synthesis and surface characteristics of nanosilica produced from alkali-extracted rice husk ash,” Material Science Enggineering, vol. B 176, pp. 521-529, 2011. DOI: https://doi.org/10.1016/j.mseb.2011.01.007

V.B. Carmona, R.M. Oliveira, W.T.L. Silva, L.H.C. Mattoso, and J.M. Marconcini, “Nanosilica from rice husk: extraction and characterization,” Industry Crops and Production, vol. 43, pp. 291-296, 2013. DOI: https://doi.org/10.1016/j.indcrop.2012.06.050

M.M. Mohamed, F.I. Zidan and M. Thabet, “Synthesis of ZSM-5 zeolite from rice husk ash: characterization and implications for photocatalytic degradation catalysts,” Micropore and Mesopore Material, vol. 108, pp. 193-203, 2008. DOI: https://doi.org/10.1016/j.micromeso.2007.03.043

G. Zahra, and Y. Habibollah, “Preparation and characterization of nanozeolite NaA from rice husk at room temperature without organic additives,” Nano Material, pp. 1-8, 2011. DOI: https://doi.org/10.1155/2011/858961

A. Mehta, and R.P. Ugwekar, “Extraction of silica and other related products from rice husk,” International Engineering Research and Application, vol. 25, pp. 43-48, 2015.

H. Xu, B. Gao, H. Cao, X. Chen, L. Yu, K. Wu, L. Sun, X. Peng, and J. Fu, “Nanoporous activated carbon derived from rice husk for high performance super capacitor,” Nano Material, pp. 1-7, 2014. DOI: https://doi.org/10.1155/2014/714010

M.F. Serra, M.S. Conconia, M.R. Gaunaa, G. Suáreza, E.F. Aglietti, and N.M. Rendtorff, “Mullite (3Al2O3·2SiO2) ceramics obtained by reaction sintering of rice husk ash and alumina, phase evolution, sintering and microstructure,” Asian Ceramic Society, vol. 4, pp. 61-77, 2016. DOI: https://doi.org/10.1016/j.jascer.2015.11.003

S. Sembiring, W. Simanjuntak, P. Manurung, D. Asmi and I.M. Low, “Synthesis and characterisation of gel-derived mullite precursors from rice husk silica,” Ceramic International, vol. 40, pp. 7067-7072, 2014. DOI: https://doi.org/10.1016/j.ceramint.2013.12.038

S.K.S. Hossain, L. Mathur, P. Singh, M.R. Majhi, “Preparation of forsterite refractory using highly abundant amorphous rice husk silica for thermal insulation,” Asian Ceramic Society, vol. 5, pp. 82-87, 2017. DOI: https://doi.org/10.1016/j.jascer.2017.01.001

S. Sembiring, A. Riyanto, W. Simanjuntak and R. Situmeang, “Effect of MgO-SiO2 ratio on the forsterite (Mg2SiO4) precursors characteristics derived from amorphous rice husk silica,” Journal of Oriental Chemistry, vol. 33, pp. 186-192, 2017. DOI: https://doi.org/10.13005/ojc/330427

F. Andreola, M.I. Martín, A.M. Ferrari, I. Lancellotti, Bondioli, J.M. Rincón, M. Romero, and L. Barbieri, “Technological properties of glass-ceramic tiles obtained using rice husk ash as silica precursor,” Ceramic International, vol. 39, pp. 5427-5435, 2013. DOI: https://doi.org/10.1016/j.ceramint.2012.12.050

S. Sembiring, W. Simanjuntak, R. Situmeang, A. Riyanto, and K. Sebayang, “Preparation of refractory cordieirite using amorphous rice husk silica for thermal insulation purposes,” Ceramic International, vol. 42, pp. 8431-8437, 2016. DOI: https://doi.org/10.1016/j.ceramint.2016.02.062

S.A.M. Hesp, I. Serban, and J.W. Shirokoff, “Reversible aging in asphalt binders,” Energy Fuels, vol. 21, pp. 1112-1121, 2007. DOI: https://doi.org/10.1021/ef060463b

P.J. Yoo, and T. Yun, “Micro-heterogeneous modification of an asphalt binder using a dimethylphenol and high-impact polystyrene solution,” Construction Building Material, vol. 49, pp. 77-83, 2013. DOI: https://doi.org/10.1016/j.conbuildmat.2013.08.009

N. Nciri, J. Kim, N. Kim, and N. Cho, “An In-Depth Investigation into the physicochemical, thermal, microstructural, and rheological properties of petroleum and natural asphalts,” Materials, vol. 9, pp. 1-20, 2016. DOI: https://doi.org/10.3390/ma9100859

V.S. Babu, L. Farinash, and M.S. Seehra, “Carbon in diesel particulate matter: Structure, microwave absorption, and oxidation,” Journal of material research, vol. 10, pp. 1075-1078, 1995. DOI: https://doi.org/10.1557/JMR.1995.1075

V.S. Babu, and M.S. Seehra, “Modeling of disorder and X-ray diffraction in coal-based graphitic carbons,” Carbon, vol. 34, pp. 1259-1265, 1996. DOI: https://doi.org/10.1016/0008-6223(96)00085-1

M. Juan, M. Jiménez, C.Q. Luis, and R. Carmen, ”Characterization of petroleum bitumens and their fractions by thermogravimetric analysis and differential scanning calorimetry,” Fuel, vol. 75, pp. 1691-1700, 1996. DOI: https://doi.org/10.1016/S0016-2361(96)00169-X

C.K. Radhakrishnan, A. Sujith, and G. Unnikrishnan, “Thermal behaviour of styrenebutadiene rubber/poly(ethylene-co-vinylacetate) blends TG and DSC analysis,” Journal of Thermal Analysed Calorimetre, vol. 90, pp. 191-199, 2007. DOI: https://doi.org/10.1007/s10973-006-7559-5

C.H. Xu, Y.Z. Lin, J.M. Xiang, and Q.H. Wang, “Application of DTA and DTG methods in the study of thermal stability of cis-1,4-polybutadiene rubbers,” China Synthesis Rubber Industry, vol. 8, pp. 419-422, 1985.