Vol. 30 No. 4 (2020)

Published: 2020-12-22

Review Articles

  • Magnetic sensors and geometrical magnetoresistance: A review

    Abdelfattah Mohammed Mansour
    1-18
    DOI: https://doi.org/10.55713/jmmm.v30i4.871
  • Quenched and tempered high strength steel: A review

    Gadadhar Sahoo, Krishna Kumar Singh, Vinod Kumar
    19-29
    DOI: https://doi.org/10.55713/jmmm.v30i4.925

Original Research Articles

  • Characterization of TiO2-activated carbon onto adsorption and photocatalytic properties and its application

    Mark Chobchun, Pasakorn Jutakridsada, Puttiporn Thiamsinsangwon, Pornnapa Kasemsiri, Khanita Kamwilaisak, Prinya Chindaprasirt
    30-38
    DOI: https://doi.org/10.55713/jmmm.v30i4.833
  • Screen printed textile electrodes using graphene and carbon nanotubes with silver for flexible supercapacitor applications

    Norawich Keawploy, Radhakrishnan Venkatkarthick, Panyawat Wangyao, Jiaqian Qin
    39-44
    DOI: https://doi.org/10.55713/jmmm.v30i4.892
  • The usage of CoAl−layered double oxide for removal of toxic dye from aqueous solution

    Pornnapa Tongchoo, Sonchai Intachai, Prakaidao Pankam, Chomponoot Suppaso, Nithima Khaorapapong
    45-50
    DOI: https://doi.org/10.55713/jmmm.v30i4.897
  • Dyeing properties and color fastness of eri silk yarn dyed with soaked red kidney bean water

    Piyaporn Kampeerapappun, Kritsana Wongwandee, Siriluk Janon
    51-59
    DOI: https://doi.org/10.55713/jmmm.v30i4.877
  • Soldering of copper using graphene-phosphoric acid gel

    Gurudatt Puranik, Asis Sarkar, Nirankar Mishra, Sangam Chandrasekhar Gurumurthy, Shridhar Mundinamani
    60-67
    DOI: https://doi.org/10.55713/jmmm.v30i4.721
  • Laser powder bed fusion of Ti6Al4V lattice structures and their applications

    Thywill Cephas Dzogbewu
    68-78
    DOI: https://doi.org/10.55713/jmmm.v30i4.821
  • Effect of variations in the composition and size of red sand grains on the quality of K-225 concrete

    Mukti Hamjah Harahap, Aulia E. Putri
    79-83
    DOI: https://doi.org/10.55713/jmmm.v30i4.765
  • Preparation and properties of fired clay bricks with added wood ash

    Anuwat Srisuwan, Supachai Sompech, Chiawchan Saengthong, Sukhontip Thaomola, Prinya Chindraprasirt, Nonthaphong Phonphuak
    84-89
    DOI: https://doi.org/10.55713/jmmm.v30i4.918
  • Ultraviolet‐shielding and water resistance properties of graphene quantum dots/ polyvinyl alcohol composite-based film

    Sutthipoj Wongrerkdee, Pichitchai Pimpang
    90-96
    DOI: https://doi.org/10.55713/jmmm.v30i4.722
  • Mechanical characterization and wear behavior of aerospace alloy AA2124 and micro B4C reinforced metal composites

    Fazil N, V Venkataraman, Madeva Nagaral
    97-105
    DOI: https://doi.org/10.55713/jmmm.v30i4.641
  • Impact of boron carbide and graphite dual particulates addition on wear behavior of A356 alloy metal matrix composites

    Pankaj R Jadhav, Madeva Nagaral, Shivakumar Rachoti, Jayasheel I Harti
    106-112
    DOI: https://doi.org/10.55713/jmmm.v30i4.642
  • Effect of amorphous rice husk silica addition on the structure of asphalt composite

    Simon Sembiring, Agus Riyanto, Rudy Situmeang, Zipora SEMBIRING, Nita Susanti, Iqbal Firdaus
    113-118
    DOI: https://doi.org/10.55713/jmmm.v30i4.659
  • Influence of coconut shell powder organic reinforcement on chemical, microstructural and mechanical properties of spark plasma sintered Ti-Ni based metal matrix composite

    Peter Odetola, Abimbola Patricia Popoola, Emmanuel Ajenifuja, Olawale Popoola
    119-127
    DOI: https://doi.org/10.55713/jmmm.v30i4.872