Techniques to improve coating adhesion of superhard coatings

Authors

  • Nurot Panich Metallurgy and Materials Science Research Institute, Chulalongkorn University
  • Panyawat Wangyao Metallurgy and Materials Science Research Institute, Chulalongkorn University
  • Nuntapol Vattanaprateep Faculty of Engineering, Rajapark College
  • Sun Yong School of Engineering & Technology, De Montfort University

Keywords:

titanium diboride coating, magnetron sputtering, adhesion and micro-scratch

Abstract

This work addresses the development of different techniques in fabricating TiB2 coatings with increased adhesion to the substrate and with retained high hardness. Titanium diboride (TiB2) coatings were deposited on high-speed steel substrates by magnetron sputtering of a TiB2 target. Attempts to enhance the coating adhesion to the substrate of the TiB2 coatings by controlling the deposition conditions and parameters are presented, such as effect of substrate rotation; annealing temperature; using deposited Cr as an interlayer material and Ti/TiB2 multilayer system. The structure of the coatings was examined by X-ray diffraction, field-emission scanning electron microscopy, and atomic force microscopy. The coating hardness and coating-substrate adhesion were investigated by nanoindentation and micro-scratch tests. It was found that the adhesion of resultant TiB2 coatings was increased tremendously by stationary substrate during deposition; annealing at optimal temperature of 450°C; using Cr interlayer and increased alternate TiB2/Ti layers.

Downloads

Download data is not yet available.

References

Chen, J. and Barnard, J. A . 1995. Growht, structure and stress of sputtered TiB2 thin films. Mater. Sci. Eng. 191(1-2) : 233-238.

Matsubara, E., Waseda, Y., Takeda, S. and Taga, Y. 1990. Structural study of TiB2 film by grazing incidence X-ray diffraction. Thin Solid Films 186 (2) : L33-L37.

Wiedemann, R., Oettel, H. and Jerenz, M. 1997. Structure of deposited and annealed TiB2 layers. Surf. Coat. Technol. 97(1-3) : 313- 321.

Berger, M., Larsson, M. and Hogmark, S. 2000. Evaluation of magnetron-sputtered TiB2 layers. Surf. Coat. Technol. 124 (2-3) : 253-261.

Ohring, M. 1991. The Materials Science of Thin films. San Diego : Academic Press,.

Oliver, W. C. and Pharr, G. M. 1992. J. Mater. Res. 7 : 1564.

Downloads

Published

2017-04-16

How to Cite

[1]
N. Panich, P. . Wangyao, N. Vattanaprateep, and S. Yong, “Techniques to improve coating adhesion of superhard coatings”, J Met Mater Miner, vol. 16, no. 2, Apr. 2017.

Issue

Section

Original Research Articles

Most read articles by the same author(s)

<< < 1 2 3 > >>