Preparation and characterization of epoxidized natural rubber and epoxidized natural rubber/carboxylated styrene butadiene rubber blends
คำสำคัญ:
Epoxidized natural rubber, Carboxylated styrene butadiene rubber, Rubber blend, Physical properties, Oil resistanceบทคัดย่อ
In this study, epoxidized natural rubber (ENR) with 30 mol % epoxidation (ENR-30) was first prepared from natural rubber (NR) latex via ‘in situ’ performic epoxidation using 0.5 M hydrogen peroxide and 0.75 M formic acid at 50°C for 4 h. The prepared ENR-30 was blended with three different loadings of carboxylated styrene butadiene rubber (XSBR) (10, 20 and 30 wt%) in the latex stage. All ENR-30/XSBR blends had longer scorch time and cure time than neat ENR-30 as examined on a moving die rheometer. The tensile properties (tensile strength, modulus at 300% strain and elongation at break), thermal stability and oil resistance of the ENR-30/XSBR blends were investigated. The incorporation of XSBR into ENR-30 caused an increase in the modulus at 300% strain but deteriorated the tensile strength and elongation at break. However, the elongation at break of the blends was still high (540–630%) as compared to that of the neat ENR-30 (690%). The results from the thermal gravimetric analysis revealed an increased initial degradation temperature but a decreased thermal stability at high temperatures. The oil resistance of ENR-30 and ENR-30/XSBR blends in terms of the percentage volume change after immersion in the ASTM Oil No. 1 and IRM 903 oil was better than that of the NR.
##plugins.generic.usageStats.downloads##
เอกสารอ้างอิง
Peng, Z., Feng, C., Luo, Y. Li, Y. and Kong, L.X. (2010). Self-assembled natural rubber/ multiwalled carbon nanotube composites using latex compounding techniques. Carbon. 48(15): 4497-4503.
Sae-oui, P., Sirisinha, C. and Hatthapanit, K. (2007). Effect of blend ratio on aging, oil and ozone resistance of silica-filled chloroprene rubber/natural rubber (CR/NR) blends. Exp. Polym. Lett. 1(1): 8-14.
Kalkornsurapranee, E., Sahakaro, K., Kaesaman, A. and Nakason, C. (2010). Influence of reaction volume on the properties of natural rubber-g-methyl methacrylate. J. Elast. Plast. 42(1): 17-34.
Arroyo, M., Lopez-Manchado, M.A., Valentin, J.L. and Carretero, J. (2007) . Morphology/behaviour relationship of nanocomposites based on natural rubber/epoxidized natural rubber blends. Compos. Sci. Technol. 67(7-8): 1330-1339.
Onyeagoro, G.N. (2013). Reactive compatibilization of natural rubber (NR)/carboxylated nitrile rubber (XNBR) blends by maleic anhyd ride-grafte d polyisoprene (MAPI) and epoxy resin dual compatibilizer. J. Eng. Sci. 2(3): 7-16.
Noriman, N.Z., Ismail, H. and Rashid, A.A. (2010). Characterization of styrene butadiene rubber/recycled acrylonitrile-butadiene rubbver (SBR/NBRr) blends : The effects of epoxidized natural rubber (ENR-50) as a compatibilizer. Polym. Test. 29(2): 200-208.
Tanrattanakul, V., Wattanathai, B., Tiangjunya, A. and Muhamud, P. (2003). In situ epoxidized natural rubber : Improve oil resistance of natural rubber. J. Appl. Polym. Sci. 90(1): 261- 269.
Chuayjuljit, S., Yaowsang, C., Na-Ranong, N. and Potiyaraj, P. (2006). Oil resaistance and physical properties of in situ epoxidized natural rubber from high ammonia concentrated latex. J. Appl. Polym. Sci. 100(5): 3948-3955.
Yoksan, R. (2008). Epoxidized natural rubber for adhesive applications. Kasetsart J. (Nat. Sci.). 42: 325-332.
Bac, N.V., Terlemezyan, L. and Mihilov, M. (1991). On the stability and in situ epoxidized of natural rubber in latex performic acid. J. Appl. Polym. Sci. 42(11): 2965-2973.
Peng, J., Zhang, X., Qiao, J. and Wei, G. (2002). Radiation preparation of ultrafine carboxylated styrene-butadiene rubber powders and application for nylon 6 as an impact modifier. J. Appl. Polym. Sci. 86(12): 3040-3046.
Stephen, R., Raju, K.V.S.N., Rao, M., Francis, B., Joseph, K. and Thomas, S. (2007). Flow properties of unvulcanized natural rubber/ carboxylated styrene-butadiene rubber latices and their blends. J. Appl. Polym. Sci. 104(4) 2528-2535.
Du, M., Guo, B., Lei, Y., Liu, M. and Jia, D. (2008). Carboxylated butadiene-styrene rubber/halloysite nanotube nanocomposites: Interfacial interaction and performance. Polymer. 49(22): 4871-4876.
Stephen, R., Raju, K.V.S.N., Nair, S.V., Varghese, S., Oommen, Z. and Thomas, S. (2003). Mechanical and viscoelastic behavior of natural rubber and carboxylated styrenebutadiene rubber latex blends. J. Appl. Polym. Sci. 88(11): 2639-2648.
Cao, X., Xu, C., Liu, Y. and Chen, Y. (2013). Preparation and properties of carboxylated s t yr e n e -b u t a d i e n e r u b b e r / c e l l u l o s e nanocrystals composites. Carbohydr Polym. 92(1): 69-76. 16. Davey, J.E. and Loadman, M.J.R. (1984).A chemical demonstration of the randomness of epoxidation of natural rubber. Brit. Polym. J. 16(3): 134-138.
Bijarimi, M., Ahmad, S. and Rasid, R. (2014). Mechanical, thermal and morphological properties of poly(lactic acid)/epoxidized natural rubber blends. J. Elast. Plast. 46(4): 338-354.
Gelling, IR. and Morrison, N.J. (1985). Sulfur vulcanization and oxidative aging of epoxidized natural rubber. Rubb. Chem. Technol. 58(2): 243-257
Ismail, H., Suzaimah, S. and Hairunezam, H.M. (2002). Curing characteristics, mechanical properties and oil resistance of styrene butadiene rubber/epoxidized natural rubber blends. J. Elast. Plast. 34(2): 119-130.
Teh, P.L., Mohd Ishak, Z.A., Hashim, A.S., Karger-Kocsis, J. and Ishiaku, U.S. (2004). Effects of epoxidized natural rubber as a compatibilizer in melt compounded natural rubber-orgaclay nanocomposites. Eur. Polym. J. 40(11): 2513-2521.
Sadequl, A.M., Ishiaku, U.S. and Poh, B.T. (1999). Cure index and activation energy of ENR 25 compared with SMR L in various vulcanization systems. Eur. Polym. J. 35(4): 711-719.
Aprem, A.S., Jose, S., Thomas, S., Barkoula,N.M. and Kocsis, J.K. (2003). Influence of hygrothermally degraded polyester-urethane on physical and mechanical properties of chloroprene rubber. Eur. Polym. J. 39(1): 69-76.
ดาวน์โหลด
เผยแพร่แล้ว
วิธีการอ้างอิง
ฉบับ
บท
การอนุญาต
ลิขสิทธิ์ (c) 2015 วารสารโลหะ, วัสดุ และแร่
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Authors who publish in this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
