Modification of montmorillonite with a cationic softener for finishing cotton fabric with hand builder performance

ผู้แต่ง

  • Siriwan Kittinaovarat Faculty of Science, Chulalongkorn University and enter for Petroleum, Petrochemicals and Advanced Materials, Chulalongkorn University
  • Nantana Jiratumnukul Faculty of Science, Chulalongkorn University and Center for Petroleum, Petrochemicals and Advanced Materials, Chulalongkorn University
  • Narissara Koolpreechanan Faculty of Science, Chulalongkorn University and Center for Petroleum, Petrochemicals and Advanced Materials, Chulalongkorn University

คำสำคัญ:

Hand builder, Montmorillonite, Textile finishing, Softener, Stiffness

บทคัดย่อ

Montmorillonite (Mont) was modified by cationic exchange with the cationic softener TEGO 28 (Di-Palm carboxyethyl hydroxyethyl methyl ammonium methosulfate). XRD analysis suggested that intercalation occurred in the modified Mont (mMont). Softening finishing solutions composed of pure TEGO 28 with and without mMont were treated on cotton fabrics by the pad-dry method and then evaluated for stiffness, whiteness, tear strength and thermal stability. TEGO 28 treatment alone increased the stiffness property of the finished fabrics, and this was increased further by the co-inclusion of mMont at 3 and 5% (w/v), but higher or lower mMont concentrations led to a marked and slight, respectively, reduction in stiffness, especially at 15% (w/v) mMont. The degree of whiteness of the finished fabrics decreased slightly with the addition of TEGO 28 alone and was further slightly decreased in a dose-dependent manner with the co-addition of increasing concentrations of mMont. In contrast, the tear strength and thermal stability of the finished fabrics both increased with increasing concentrations of mMont in the softening finishing solution.

Downloads

Download data is not yet available.

เอกสารอ้างอิง

Cho, J.W. & Paul, D.R. (2001). Nylon 6 nanocomposite by melt compounding. Polymer 42(3): 1083-1094.

Kim, J.T., Lee, D.Y., Oh, T.S. & Lee, D.H. (2003). Characteristics of nitrile-butadiene rubber layered silicate nanocomposite with silane coupling agent. J. Appl. Polym. Sci. 89(10): 2633-2640.

White, L.A. (2004). Preparation and thermal analysis of cotton-clay nanocomposite. J. Appl. Polym. Sci. 92(4): 2125-2131.

Fan, Q., Ugbolue, S.C., Wilson, A.R., Dar, Y.S. & Yang, Y. (2003). Nanoclaymodified polypropylene dyeable with acid and disperse dyes. AATCC Rev. 3(6): 25-28.

Bajaj, P. (2002). Finishing of textile materials. J. Appl. Polym. Sci. 83(3): 631-659.

Carr, C.M. (Ed.). (1995). Chemistry of the textile industry. New York, NY: Blackie Academic & Professional.

Perkins, W.S. (1996). Textile coloration and finishing. New York, NY: Carolina Academic Press.

Schindler, W.D. & Hauser, P.J. (2004).Chemical Finishing of Textiles. Florida: CRC Press.

Song, L., Hu, Y., Lin, Z., Xuan, S., Wang, S., Chen, Z., Fan, W. (2004). Preparation and properties of halogen-free flameretarded polyamide 6/organoclay nanocomposite. Polym. Degrad. Stabil. 86(6): 535-540.

ดาวน์โหลด

เผยแพร่แล้ว

2011-06-30

วิธีการอ้างอิง

[1]
S. Kittinaovarat, N. Jiratumnukul, และ N. Koolpreechanan, “Modification of montmorillonite with a cationic softener for finishing cotton fabric with hand builder performance”, J Met Mater Miner, ปี 21, ฉบับที่ 1, มิ.ย. 2011.

ฉบับ

บท

Original Research Articles

Most read articles by the same author(s)