Composition-driven phase coexistence and functional properties of the (1-x)BZT-(x)BCT ceramics near the phase convergence region
DOI:
https://doi.org/10.55713/jmmm.v34i1.1798คำสำคัญ:
Synchrotron XRD, Electroceramics, Lead-free piezoceramics, Ferroelectricityบทคัดย่อ
The concept of composition-induced phase transformation in Lead Zirconate Titanate (PZT) at the Morphotropic Phase Boundary (MPB) has been employed to improve functional properties of the (1-x)BZT-(x)BCT ceramic. However, it was observed that the phase diagram of the (1-x)BZT-(x)BCT ceramic is different to the PZT. As a result, the nature of the superior functional properties found in (1-x)BZT-(x)BCT ceramic is unlike PZT and still unclear so far. In this work, functional properties; dielectric, ferroelectric, energy storage, and piezoelectric properties, of the (1-x)BZT-(x)BCT ceramics where x = 0.3 mol% to 0.6 mol% were evaluated at room temperature in comparison to the identification of phase coexistence using synchrotron x-ray powder diffraction (SXPD). This work found that changes of BCT content had a strong impact on the observed coexisting phases and functional properties. Moreover, the composition that showed the highest piezoelectric properties did not present the largest of saturation polarization. This implies that the functional properties of the (1-x)BZT-(x)BCT ceramics are not dependent on the presence of polarizations under the application of electric field. The contribution of non-180° domain switching also plays a vital role, especially in the piezoelectric properties. These findings would help to extend our knowledge of the nature of the (1-x)BZT-(x)BCT ceramic.
Downloads
เอกสารอ้างอิง
G. Wang, Z. Lu, Y. Li, L. Li, H. Ji, A. Feteira, D. Zhou, D. Wang, S. Zhang, and I. Reaney, "Electroceramics for high-energy density capacitors: Current status and future perspectives," Chemical Reviews, vol. 121, no. 10, pp. 6124-6172, 2021.
P. S. Kadhane, B. G. Baraskar, T. C. Darvade, A. R. James, and R. C. Kambale, "Ferroelectric and piezoelectric properties of Ca2+ and Sn4+ substituted BaTiO3 lead-free electroceramics on the emphasis of phase coexistence," Solid State Communications, vol. 306, p. 113797, 2020.
J. Rödel, W. Jo, K. T. P. Seifert, E.-M. Anton, T. Granzow, and D. Damjanovic, "Perspective on the Development of Lead-free Piezoceramics," Journal of the American Ceramic Society, vol. 92, no. 6, pp. 1153-1177, 2009.
C.-H. Hong, H.-P. Kim, B.-Y. Choi, H.-S. Han, J. S. Son, C. W. Ahn, and W. Jo, "Lead-free piezoceramics – Where to move on?," Journal of Materiomics, vol. 2, no. 1, pp. 1-24, 2016.
M. Acosta, N. Novak, V. Rojas, S. Patel, R. Vaish, J. Koruza, G. A. Jr. Rossetti, and J. Rödel, "BaTiO3-based piezoelectrics: Fundamentals, current status, and perspectives," Applied Physics Reviews, vol. 4, no. 4, p. 041305, 2017.
M. Maraj, W. Wei, B. Peng, and W. Sun, "Dielectric and energy storage properties of Ba(1−x)CaxZryTi(1−y)O3 (BCZT): A review," Materials, vol. 12, no. 21. 2019.
J. Rödel, and J.-F. Li, "Lead-free piezoceramics: Status and perspectives," MRS Bulletin, vol. 43, no. 8, pp. 576-580, 2018.
W. Liu, and X. Ren, "Large piezoelectric effect in Pb-free ceramics," Physical Review Letters, vol. 103, no. 25, p. 257602, 2009.
D. S. Keeble, F. Benabdallah, P. A. Thomas, M. Maglione, and J. Kreisel, "Revised structural phase diagram of (Ba0.7Ca0.3TiO3)-(BaZr0.2Ti0.8O3)," Applied Physics Letters, vol. 102, no. 9, p. 092903, 2013.
J. Gao, X. Ke, M. Acosta, J. Glaum, and X. Ren, "High piezo-electricity by multiphase coexisting point: Barium titanate derivatives," MRS Bulletin, vol. 43, no. 8, pp. 595-599, 2018.
L. Zhang, M. Zhang, L. Wang, C. Zhou, Z. Zhang, Y. Yao, L. Zhang, D. Xue, X. Lou, and X. Ren, "Phase transitions and the piezoelectricity around morphotropic phase boundary in Ba(Zr0.2Ti0.8)O3-x(Ba0.7Ca0.3)TiO3 lead-free solid solution," Applied Physics Letters, vol. 105, no. 16, p. 162908, 2014.
Y. Tian, L. Wei, X. Chao, Z. Liu, and Z. Yang, "Phase transition behavior and large piezoelectricity near the morphotropic phase boundary of lead-free (Ba0.85Ca0.15)(Zr0.1Ti0.9)O3 ceramics," Journal of the American Ceramic Society, vol. 96, no. 2, pp. 496-502, 2013.
M. C. Ehmke, J. Glaum, M. Hoffman, J. E. Blendell, and K. J. Bowman, "The effect of electric poling on the performance of lead-free (1−x)Ba(Zr0.2Ti0.8)O3–x(Ba0.7Ca0.3)TiO3 piezoceramics," Journal of the American Ceramic Society, vol. 96, no. 12, pp. 3805-3811, 2013.
M. Acosta, N. Khakpash, T. Someya, N. Novak, W. Jo, H. Nagata, G.A. Rossetti, and J. Rödel, "Origin of the large piezoelectric activity in (1−x)Ba(Zr0.2Ti0.8)O3-x(Ba0.7Ca0.3)TiO3 ceramics," Physical Review B, vol. 91, no. 10, p. 104108, 2015.
S. Gražulis, D. Chateigner, R.T. Downs, A.F. Yokochi, M. Quirós, L. Lutterotti, E. Manakova, J. Butkus, P. Moeck, A. Le Bail, "Crystallography open database - an open-access collection of crystal structures,", Journal of applied crystallography, vol. 42, no. Pt 4, pp. 726-729, 2009.
M. I. Mendelson, "Average grain size in polycrystalline ceramics," Journal of the American Ceramic Society, vol. 52, no. 8, pp. 443-446, 1969.
A. Bjørnetun Haugen, J. S. Forrester, D. Damjanovic, B. Li, K. J. Bowman, and J. L. Jones, "Structure and phase transitions in 0.5(Ba0.7Ca0.3TiO3)-0.5(BaZr0.2Ti0.8O3) from −100℃ to 150℃," Journal of Applied Physics, vol. 113, no. 1, p. 014103, 2013.
M. Gao, W. Ge, X. Li, H. Yuan, C. Liu, H. Zhao, Y. Ma, Y. Chang, "Enhanced dielectric and energy storage properties in Fe-doped BCZT ferroelectric ceramics," Physica status solidi (a), vol. 217, no. 16, p. 2000253, 2020.
W. Li, Z. Xu, R. Chu, P. Fu, and G. Zang, "Structural and dielectric properties in the (Ba1−xCax)(Ti0.95Zr0.05)O3 ceramics," Current Applied Physics, vol. 12, no. 3, pp. 748-751, 2012.
J. Kondoh, "Origin of the hump on the left shoulder of the X-ray diffraction peaks observed in Y2O3-fully and partially stabilized ZrO2," Journal of Alloys and Compounds, vol. 375, no. 1, pp. 270-282, 2004.
J. Kondoh, T. Kawashima, S. Kikuchi, Y. Tomii, and Y. Ito, "Effect of aging on yttria‐stabilized zirconia: I. A study of its electrochemical properties," Journal of The Electrochemical Society, vol. 145, no. 5, pp. 1527, 1998.
M. Acosta, N. Novak, W. Jo, and J. Rödel, "Relationship between electromechanical properties and phase diagram in the Ba(Zr0.2Ti0.8)O3–x(Ba0.7Ca0.3)TiO3 lead-free piezoceramic," Acta Materialia, vol. 80, pp. 48-55, 2014.
V. L. Ene, V.R. Lupu, C.V. Condor, R.E. Patru, L.M. Hrib, L. Amarande, A.I. Nicoara, L. Pintilie, and A.C. Ianculescu, "Influence of grain size on dielectric behavior in lead-free 0.5 Ba(Zr0.2Ti0.8) O3-0.5(Ba0.7Ca0.3)TiO3 ceramics," Nanomaterials, vol. 13, no. 22, 2023.
G. Herrera-Pérez, I. Castillo-Sandoval, O. Solís-Canto, G. Tapia-Padilla, A. Reyes-Rojas, and L. E. Fuentes-Cobas, "Local piezo-response for lead-free Ba0.9Ca0.1Ti0.9Zr0.1O3 electro-ceramic by switching spectroscopy," Materials Research, vol. 21, 2018.
L. Chen, C. Kim, R. Batra, J.P. Lightstone, C. Wu, Z. Li, A.A. Deshmukh, Y. Wang, H.D. Tran, P. Vashishta, G.A. Sotzing, Y. Cao, and R. Ramprasad, "Frequency-dependent dielectric constant prediction of polymers using machine learning," Computational Materials, vol. 6, no. 1, p. 61, 2020.
K. H. Härdtl, "Electrical and mechanical losses in ferroelectric ceramics," Ceramics International, vol. 8, no. 4, pp. 121-127, 1982.
Y. B. Adediji, A. M. Adeyinka, D. I. Yahya, and O. V. Mbelu, "A review of energy storage applications of lead-free BaTiO3-based dielectric ceramic capacitors," Energy, Ecology and Environment, vol. 8, no. 5, pp. 401-419, 2023.
D. Dragan, "Ferroelectric, dielectric and piezoelectric properties of ferroelectric thin films and ceramics," Reports on Progress in Physics, vol. 61, no. 9, p. 1267, 1998.
J. Gao, X. Hu, Y. Wang, Y. Liu, L. Zhang, X. Ke, L. Zhong, H. Zhao, and X. Ren, "Understanding the mechanism of large dielectric response in Pb-free (1−x)Ba(Zr0.2Ti0.8)O3−x(Ba0.7Ca0.3) TiO3 ferroelectric ceramics," Acta Materialia, vol. 125, pp. 177-186, 2017.
A. R. Jayakrishnan, J. P. B. Silva, K. Kamakshi, D. Dastan, V. Annapureddy, M. Pereira, and K. C. Sekhar, "Are lead-free relaxor ferroelectric materials the most promising candidates for energy storage capacitors?," Progress in Materials Science, vol. 132, 2023.
Z. Hanani, S. Merselmiz, M. Amjoud, D. Mezzane, M. Lahcini, J. Ghanbaja, M. Spreitzer, D. Vengust, M. El Marssi, I.A. Luk'yanchuk, Z. Kutnjak, B. Rožič, and M. Gouné, "Novel lead-free BCZT-based ceramic with thermally-stable recovered energy density and increased energy storage efficiency," Journal of Materiomics, vol. 8, no. 4, pp. 873-881, 2022.
R. Syal, P. Sharma, S. Singh, and S. Kumar, "Investigation of energy storage properties in lead-free BZT-40BCT relaxor ceramic," Materials Today: Proceedings, 2023.
J. G. Maier, A. Gadelmawla, N. H. Khansur, and K. G. Webber, "Stress-induced tailoring of energy storage properties in lead-free Ba0.85Ca0.15Zr0.1Ti0.9O3 ferroelectric bulk ceramics," Journal of Materiomics, vol. 9, no. 4, pp. 673-682, 2023.
M. B. Abdessalem, S. Aydi, A. Aydi, N. Abdelmoula, Z. Sassi, and H. Khemakhem, "Polymorphic phase transition and morphotropic phase boundary in Ba1−xCaxTi1−yZryO3 ceramics," Applied Physics A, vol. 123, no. 9, 2017.
N. Boothrawong, L. Tawee, S. Thammarong, P. Jaita, D. R. Sweatman, G. Rujijanagul, and T. Tunkasiri, "Dependence of applied electric fields on electrical properties of BCZT ceramic," ScienceAsia, vol. 49, no. 3, pp. 344-352, 2023.
S. Merselmiz, Z. Hanani, D. Mezzane, A.G. Razumnaya, M. Amjoud, L. Hajji, S. Terenchuk, B. Rozic, I.A. Luk'yanchuk, and Z. Kutnjak, "Thermal-stability of the enhanced piezoelectric, energy storage and electrocaloric properties of a lead-free BCZT ceramic," RSC Adv, vol. 11, no. 16, pp. 9459-9468, 2021.
ดาวน์โหลด
เผยแพร่แล้ว
วิธีการอ้างอิง
ฉบับ
บท
การอนุญาต
ลิขสิทธิ์ (c) 2023 วารสารโลหะ, วัสดุ และแร่
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Authors who publish in this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.