Effect of K<sub>2</sub>O/SiO<sub>2</sub> ratio on the crystallization of leucite in silicate-based glasses

ผู้แต่ง

  • Pat Sooksaen Faculty of Engineering and Industrial Technology, Silpakorn University and Center of Excellence for Petroleum, Petrochemicals and Advanced Materials, Chulalongkorn University
  • Janjira Boonmee Faculty of Engineering and Industrial Technology, Silpakorn University
  • Chaiyaporn Witpathomwong Faculty of Engineering and Industrial Technology, Silpakorn University
  • Somthida Likhitlert Faculty of Engineering and Industrial Technology, Silpakorn University

คำสำคัญ:

Leucite, Quenching, Heat treatment, Glass-ceramics, X-ray diffraction

บทคัดย่อ

Leucite-based glass-ceramics were prepared by controlled crystallization of suitable glass compositions to give required crystalline phase/s. Three glass batches in the system SiO2 - K2O - NaO2 - Al2O3 - TiO2 - CaO were prepared by varying K2O/SiO2 ratio, then melted and quenched. Glasses were characterized for onset of crystallization temperatures by differential thermal analysis (DTA), and heat treatments were carried out from 850 – 1000°C for 4 hours for controlled crystallization of leucite phase. Physical, chemical and crystal structure characterizations were carried out using X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR) and scanning electron microscopy (SEM). XRD found leucite as a major phase in all heat treatment temperatures. Increasing the heat treatment temperature as well as increasing the amount of K2O/SiO2 ratio caused the amount of leucite phase to increase also. The silicate chain structure was found from FT-IR analysis, which confirmed the appearance of leucite phase. SEM indicated that increasing K2O/SiO2 ratio in the glass batch led to a slight increase in the crystal size, and also a slight change in the morphology of the leucite phase. Glass with the highest K2O/SiO2 ratio in this study, when heat-treated at 1000°C, showed an increased amount of secondary phase/s as opposed to the main leucite phase according to XRD data.

Downloads

Download data is not yet available.

เอกสารอ้างอิง

Kelly, J.R. 2004. Dental ceramics: current thinking and trends. Dent. Clin. North Am. 48(2) : 513–530.

Kelly, J.R., Nishimura, I. and Campbell, S.D. 1996. Ceramics in dentistry: historical roots and current perspectives. J. Prosthet. Dent. 75(1) : 18–32.

Hench, L.L. 2005. Bioceramics: from concept to clinic. J. Am. Ceram. Soc. 74(7) : 1487–1510.

Höland, W., Rheinberger, V., Apel, E. and Hoen, C. 2007. Principles and phenomena of bioengineering with glass-ceramics for dental restoration. J. Eur. Ceram. Soc. 27(2-3) : 1521–1526.

Kelly, J. R., Campbell, S. D. and Bowen, H. K. 1989. Fracture surface analysis of dental ceramics. J. Prosthet. Dent. 62(5) : 536–541.

Mackert, J.R., Russell, C.M. and Williams, A.L. 2001. Evidence of a critical leucite particle size for microcracking in dental porcelains. J. Dent. Res. 80(6) : 1574–9.

Mackert, J.R., Butt, M.B. and Fairhurst, C.W. 1986. The effect of the leucite transformation on dental porcelain expansion. Dent. Mater. 2(1) : 32–36.

Novotna, M. and Maixner, J. 2006. X-ray powder diffraction study of leucite crystallisation. Z. Kristallogr. Suppl. 23 : 455-459.

Holand, W. and Beall, G.H. 2002. Glass-ceramic technology. Westerville, Ohio: The American Ceramic Society : 372.

Cattell, M.J., Chadwick, T.C., Knowles, J.C. and Clarke, R.L. 2005. The crystallization of an aluminosilicate glass in the K2O–Al2O3–SiO2 system. Dent. Mater. 21 : 811–822.

Cattell, M. J., Chadwick, T.C., Knowles, J.C., Clarke, R.L. and Samarawickrama D.Y.D 2006. The nucleation and crystallization of fine grained leucite glass-ceramics for dental applications. Dental. Materials. 22(10) : 925–933.

Höland, W., Frank, M. and Rheinberger, V. 1995. Surface crystallization of leucite in glass. J. Non-Cryst. Solids. 180(2-3) : 292–307.

Höland, W. 1997. Biocompatible and bioactive glass-ceramics − state of the art and new directions. J. Non-Cryst. Solids. 219(1) : 192-197.

McMillan, P. 1979. Glass-ceramics. 2nd ed. London: Academic Press Inc.

Beall, G. 1989. Design of glass-ceramics. Solid State Sci. 3 : 333–354.

James, P. 1982. Nucleation in glass forming systems—a review. In: Simmons, J.H., Uhlmann, D.R., Beall, G. (eds) Advances in ceramics, nucleation and crystallisation in glasses. Columbus, Ohio: The American Ceramic Society.

Grossman, D.G. 1985. Cast glass-ceramics. Dent. Clin. North Am. 29 : 719–723.

Sooksaen, P. and Reaney, I.M. 2008. Thermal analysis and phase evolution of ferroelectric PbTiO3 obtained from silicate and borate based glasses. J. Mater. Sci. 43(4) : 1265- 1269.

Doremus, R.H. 1994. Glass science. 2nd ed. New York: Wiley.

Shelby, J.E. 2005. Introduction to glass science and technology. 2nd ed. Cornwall: TJ International.

Grossman, D.G., and Isard, J.O. 1969. Crystal clamping in PbTiO3 glass-ceramics. J. Mater. Sci. 4 : 1059.

Sooksaen, P., Reaney, I.M. and Sinclair, D.C. 2005. Lead titanate glass-ceramics derived from a silicate-based melt. J. Mater. Res. 20(5) : 1316-1323.

Denry, I.L., Holloway, J.A. and Colijn, H.O. 2001. Phase transformations in a leucitereinforced pressable dental ceramic. J. Biomed. Mater. Res. 54(3) : 351–359.

Szabo, I., Nagy, B., Völksch, G. and Höland, W. 2000. Structure, chemical durability and microhardness of glass-ceramics containing apatite and leucite crystals. J. Non-Cryst. Solids. 272(2-3) : 191–199.

Elliott, J.C. 1994. Structure and chemistry of the apatites and other calcium orthophosphates. Amsterdam :Elsevier Science.

Kuriakose, T.A. and Kalkura, S.N. 2004. Synthesis of stoichiometric nano crystalline hydroxyapatite by ethanol-based sol–gel technique at low temperature. J. Cryst. Growth. 263(1-4) : 517–523.

ดาวน์โหลด

เผยแพร่แล้ว

2017-04-15

วิธีการอ้างอิง

[1]
P. Sooksaen, J. Boonmee, C. Witpathomwong, และ S. Likhitlert, “Effect of K<sub>2</sub>O/SiO<sub>2</sub> ratio on the crystallization of leucite in silicate-based glasses”, J Met Mater Miner, ปี 20, ฉบับที่ 1, เม.ย. 2017.

ฉบับ

ปีที่ 20 ฉบับที่ 1 (2010)

บท

Original Research Articles

การอนุญาต

ลิขสิทธิ์ (c) 2017 Journal of Metals, Materials and Minerals

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Authors who publish in this journal agree to the following terms:

    1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.

 

    1. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.