Creep behavior of linear low-density polyethylene films

ผู้แต่ง

  • Yakov Unigovski Dept of Materials Engineering, Ben-Gurion University of the Negev
  • Arthur Bobovitch Syfan Saad (99) Ltd
  • Emmanuel Gutman Dept of Materials Engineering, Ben-Gurion University of the Negev

##plugins.pubIds.doi.readerDisplayName##:

https://doi.org/10.55713/jmmm.v16i1.244

คำสำคัญ:

polyethylene films, orientation, β-irradiation, crosslinking, creep

บทคัดย่อ

The Creep of biaxially-orientated linear low-density polyethylene (LLDPE) non-crosslinked and crosslinked with β-irradiation was studied as a function of the draw ratio and irradiation dose. The creep results have shown an increase in the creep strain after the polymer irradiation with a dose below 4 Megarad (MR) in comparison with a non-irradiated film. This increase corresponds to the disorientation in the amorphous phase, which takes place as a result of the film heating during irradiation. This disorientation was demonstrated by differential scanning calorimetry (DSC) and X-ray analysis.

##plugins.generic.usageStats.downloads##

##plugins.generic.usageStats.noStats##

เอกสารอ้างอิง

(1) Birkinshaw, C., Buggy, M., Daly S. and O’Neill, M. 1989. J. Appl. Polym. Sci. 38.

(2) Bobovitch, A., Gutman, E.M., Henning S. and Michler G.H. 2003. Morphology and stress relaxation in oriented polyolefin shrink films. J. Appl. Polym. Sci. 90: 3424-3429.

(3) Deny, M., Latour, R. A., Ogale A. A. and Shalaby, W.S. 1998. J. Biomed. Mat. Res. 40: 214.

(4) Ikada, Y., Nakamura, S., Ogata, K., Makino, T.K., Endoh, N., Kayashi, I., Fujita, S., Fujiseena, A., Masudee, S. and Oonishi, H. 1999. J. Polym.Sci., Part A : Polym. Chem. 32: 159.

(5) Klein, P. G., Ladizrsky N. H., and Ward, I. M. 1986. J. Polym. Sci.: Part B, Polym. Phys. 24: 1093.

(6) Marin, J., Criesacher, D. B. 1963. J. Appl. Polym. Sci. 7: 133.

(7) Peacock, A. J. 2000. Handbook of polyethylene. Structures, Properties and Applications, N.Y. Marcel Decker, Inc. : 534 p.

(8) Peterlin, A. 1971. J. Mater. Sci. 6: 490.

(9) O’Connel, P. A., Banner, M. J., Duckett, R. A. and Ward, I.M. 2003. Effect of molecular weight and branch content on the creep behavior of oriented polyethylene. J. Appl. Polym. Sci. 89: 1663-1670.

(10) Osborn, K .R. and Jenkins, K. R. 1992. Plastic Films Lancaster. PN. Technomoc Publishing Co.

(11) Rasburn, J., Klein, P. G. and Ward, I. M. 1994. J. Polym. Sci. Part B : Polym. Phys. 32: 1329.

(12) Sangster, D.F. and Barry, D.B. 1991. J. Appl. Polym. Sci. 42: 1385.

(13) Ward, I.M. and Wilding, H.A. 1984. J. Polym. Sci., Polym. Phys. Ed. 22: 561.

(14) Zhou, H. and Wilkes, G. L. 1998. Polym. 39: 3597.

ดาวน์โหลด

เผยแพร่แล้ว

2017-04-16

วิธีการอ้างอิง

[1]
Y. Unigovski, A. Bobovitch, และ E. Gutman, “Creep behavior of linear low-density polyethylene films”, J Met Mater Miner, ปี 16, ฉบับที่ 1, เม.ย. 2017.

ฉบับ

ปีที่ 16 ฉบับที่ 1 (2006)

บท

Original Research Articles

การอนุญาต

ลิขสิทธิ์ (c) 2017 Journal of Metals, Materials and Minerals

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Authors who publish in this journal agree to the following terms:

    1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.

 

    1. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.

##plugins.generic.recommendByAuthor.heading##