Texture analysis of welded 304L pipeline steel
คำสำคัญ:
Stainless steel, Welding, EBSD, Texture, Heat treatmentsบทคัดย่อ
This paper deals with the effect of arc welding process on the crystallographic texture of pipeline 304L steel. The electron backscatter diffraction (EBSD) technique was used to illustrate the effect of welding on the grain orientation in the fusion zone, in the heat affected zone, and in the base metal. Moreover, the effect of isothermal heat treatment at 400°C on welded joint has been studied. The same orientation was found in the base metal and the heat affected zone but different and heterogeneous structures were observed in the fusion zone. The applied heat treatments at 400°C on the welded material had a slight effect on the crystallographic texture, but it had an effect on the grain size in the fusion zone.Downloads
เอกสารอ้างอิง
G. R. Mirshekari, E. Tavakoli, M. Atapour, and B. Sadeghian, “Microstructure and corrosion behavior of multipass gas tungsten arc welded 304L stainless steel,” Materials and Design, vol. 55, pp. 905-911, 2014.
J. Wang, J. Xionga, Q. Pengb, H. Fana, Y. Wang, G. Lia, and B. Shen, “Effects of DC plasma nitriding parameters on microstructure and properties of 304L stainless steel,” Materials Characterization, vol. 60, pp. 197- 203, 2009.
G. Kiymaz and E. Seckin, “Behavior and design of stainless steel tubular member welded end connections,” Steel and Composite Structures, vol.17, 3, pp. 253-269, 2014.
X. Chen, G. Chen, and D. Li, “Ratcheting behavior of pressurized Z2CND18.12N stainless steel pipe under different control modes,” Steel and Composite Structures, vol.18, pp. 29-50, 2015.
W. F. Smith, Structure and properties of engineering alloys. 2nd ed. New York: McGraw-Hill, 1993.
G. Lothongkum, E. Viyanit, and P. Bhandhubanyong, “Study on the effects of pulsed TIG welding parameters on delta-ferrite content, shape factor and bead quality in orbital welding of AISI316l stainless steel plate,” Journal of Materials Processing Technology, vol. 110, pp. 233-238, 2001.
A. Gholipour, M. Shamanian, and F. Ashrafizadeh, “Microstructure and wear behavior of stellite 6 cladding on 17–4 PH stainless steel,” Journal of Alloys and Compounds, vol. 509, 14, pp. 4905-4909, 2011.
J. Sule, S. Ganguly, H. Coules, and T. Pirling, “Application of local mechanical tensioning and laser processing to refine microstructure and modify residual stress state of a multi-pass 304L austenitic steels welds,” Journal of Manufacturing Processes, vol. 18, pp. 141- 150, 2015.
A. Mostafa and S. Bordbar, “Applying a novel heat treatment cycle to modify the microstructure of welded APIX70 pipeline steel,” Materials Letters, vol. 98, pp.178-181, 2013.
C. M. Lin, H. L. Tsai, C. D. Cheng, and C. Yang, “Effect of repeated weld-repairs on microstructure, texture, impact properties and corrosion properties of ISI 304L stainless steel,” Engineering Failure Analysis, vol. 21, pp. 9-20, 2012.
P. K. Giridharan and N. Murugan, “Optimization of pulsed GTA welding process parameters for the welding of 304L stainless steel sheets,” The International Journal of Advanced Manufacturing Technology , vol. 40, pp. 478-489, 2009.
S. A. A., Akbari Mousavi and R. Miresmaeili, “Experimental and numerical analyses of residual stress of distributions in TIG welding process for 304L stainless steel,” Journal of Materials Processing Technology , vol. 208, pp. 383-394, 2008.
Z. Boumerzoug, S. Hamza and, V. Ji, “Effect of heat treatment on the microstructural evolution in weld Region of 304l pipeline steel,” Journal of Thermal Engineering, vol. 2, pp. 1017-1022, 2016.
S. Saha, M. Mukherjee, and T. K. Pal, “Microstructure, texture and mechanical property analysis of gas metal arc welded AISI304 austenitic stainless steel,” Journal of Materials Engineering, vol. 24, pp. 1125-1139, 2015.
Z. Boumerzoug, C. Derfouf, and T. Baudin, “Effect of welding on microstructure and mechanical properties of an industrial low carbon steel,” Engineering, vol. 2, pp. 502-506, 2010.
H. Mecking, Preferred orientation in deformed metals and rocks: An introduction to modern texture analysis, California, Ed. Hans Rudolf Wenk, 1985.
S. A. David, S. S. Babu, and J. M. Vitek, “Welding: Solidification and microstructure,” JOM, vol. 55 pp. 14-20, 2003.
A. F. Norman, I. Brough, and P. B. Prangnell, “High resolution EBSD analysis of the grain structure in an AA2024 friction stir weld,” Proceeding of the 7th International conference on Aluminium Alloys (ICAA-7), Virginia, Trans Tech Publications, USA, pp. 1713-1718, 2000.
K. Tagashira, K. Kikuchi, and T. Tanaka, “Solidification texture in aluminum beads welded using a CO2 laser,” Journal of the Japan Institute of Metals, vol. 64, pp. 407-412, 2000.
S. Babu, H. K. D. H. Bhadeshia, and L. E. Svenson, “Crystallographic texture and the austenite grain structure of low-alloy steel weld deposits,” Journal of Materials Science Letters, vol. 10, pp. 142-144, 1991.
Course “Solidification of Weld Metal” (2013) Available from: http://nptel.ac.in/courses/1121 07090/33
A. O. Kluken, Ø. Grong, and J. Hjelen, “The origin of transformation textures in steel weld metals containing acicular ferrite,” Metallurgical Transactions A, vol. 22, pp. 657-663, 1991.
Ø. Grong and D. K. Matlock, “Microstructural development in mild and low –alloy steel weld metals,” International Metals Reviews, vol. 31, pp. 27-48, 1986.
A. O. Kluken, Ø. Grong, and G. Rorvik, “Solidification microstructures and phase transformations in Al-Ti-Si-Mn deoxidized steel weld metals,” Metallurgical Transactions A, vol. 21, pp. 2047-2058, 1990.
H. L. Wei, J. Mazumder, and T. DebRoy, “Evolution of solidification texture during additive manufacturing,” Scientific Reports 5, Article number: 16446, 2015.
A. A. Ugla, “Enhancement of weld quality of AISI 304L austenitic stainless steel using a direct current pulsed TIG arc,” presented at 2nd International Conference on Engineering Sciences. IOP Conference Series: Materials Science and Engineering, Kerbala, Iraq, 2018.
S. David and J. Vitek, International trends in welding science and technology, ASM, 1993.
F. C. Campbell, Elements of metallurgy and engineering alloys. Ohio: ASM International, 2008.
X. H. Ha, S. W. Jang, W. H. Bang, U. S. Yoon, and K. H. Oh, “Texture, Evolution in Weld Regions of SUS-304 Stainless Steel and TRIP Steel,” Materials Science Forum, vol. 408-412, pp. 1377-1382, 2002.
ดาวน์โหลด
เผยแพร่แล้ว
วิธีการอ้างอิง
ฉบับ
บท
การอนุญาต
ลิขสิทธิ์ (c) 2019 Journal of Metals, Materials and Minerals
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Authors who publish in this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
