Vol. 32 No. 1 (2022)

Published: 2022-03-29

Review Articles

  • Protocols of improvements for PMMA denture base resin: An overview

    Nidal W. Elshereksi, Fathie A. Kundie , Andanastuti Muchtar, Che H. Azhari
    1-11
    DOI: https://doi.org/10.55713/jmmm.v32i1.1245

Original Research Articles

  • Evaluation of static recrystallization and grain growth kinetics of hot-rolled AZ31 alloy

    Salaheddine Sadi, Abdelkader Hanna, Thierr Baudin, Anne-Laure Helbert, François Brisset, Djamel Bradai, Hiba Azzeddine
    12-26
    DOI: https://doi.org/10.55713/jmmm.v32i1.1241

  • Bio-composite of nipa palm husk derived activated carbon/poly(butylene succinate): an effective agricultural waste based adsorbent for ammonia removal

    Chaichana PIYAMAWADEE, Viboon SRICHAROENCHAIKUL, Duangdao AHT-ONG
    27-40
    DOI: https://doi.org/10.55713/jmmm.v32i1.1248

  • Effect of Al Addition on Crystal Structure of AlGaN/GaN on GaAs (001) Substrate Grown by Metalorganic Vapor Phase Epitaxy

    Nattamon SUWANNAHARN, Sakuntam SANORPIM, Suphakan KIJAMNAJSUK, Visittapong YORDSRI, Noppadon NUNTAWONG, Kentaro ONABE
    41-47
    DOI: https://doi.org/10.55713/jmmm.v32i1.1240

  • Facile synthesis of heterostructured g-C3N4/Ag -TiO2 photocatalysts with enhanced visible-light photocatalytic performance

    Chonnipha TANGWONGPUTTI, Prasert REUBROYCHAROEN, Pornapa SUJARIDWORAKUN
    48-54
    DOI: https://doi.org/10.55713/jmmm.v32i1.1246

  • Effect of pre-carbonization temperature on the porous structure and electrochemical properties of activated carbon fibers derived from kapok for supercapacitor applications

    Nu Myat THAZIN, Nattapat CHAIAMMART, Myo Myo THU, Gasidit PANOMSUWAN
    55-64
    DOI: https://doi.org/10.55713/jmmm.v32i1.1247

  • Effects of milling time on sintering properties and formation of interface Al4C3 on graphite reinforced Al-4.5Cu-1.5Mg nanocomposite

    Angga Khairul Fahmi, Haris Rudianto, Agus Sukarto Wismogroho, Wahyu Bambang Widayatno, Didik Aryanto, Bambang Hermanto
    65-71
    DOI: https://doi.org/10.55713/jmmm.v32i1.1132

  • Influence of six-step heat treatment on microstructures and mechanical properties of 5160 alloy steel

    Pattama APICHAI
    72-78
    DOI: https://doi.org/10.55713/jmmm.v32i1.1141

  • Biodiesel production from waste cooking oil using a new heterogeneous catalyst SrO doped CaO nanoparticles

    Apisit Prokaewa, Siwaporn Meejoo Smith, Apanee Luengnaruemitchai, Mathi Kandiah, Supakorn boonyuen
    79-85
    DOI: https://doi.org/10.55713/jmmm.v32i1.1149

  • Sintering behavior of nanostructured β-CPP powder obtained from avian eggshell waste

    Bruno Silvano SILVA, Tarcília Henrique Amaral Correa, Rômulo Leite LOIOLA, José Nilson França HOLANDA
    86-92
    DOI: https://doi.org/10.55713/jmmm.v32i1.1171

  • Utilization of silicon dioxide powder from industrial wastes as novel filler in rubber isolator application

    Amorn AJINSAMAJAN, Adisai RUNGVICHANIWAT; Anuwat SAETUNG
    93-100
    DOI: https://doi.org/10.55713/jmmm.v32i1.1205

  • Study of the effect of pH, conditioning and flotation time on the flotation efficiency of phosphate ores by a soybean oil collector

    Zohra FARID, Mohamed ABDENNOURI, Noureddine BARKA, Youness JANNANI, M'hamed SADIQ
    101-108
    DOI: https://doi.org/10.55713/jmmm.v32i1.1212

  • The finished polyester fabric with hot NH4OH pretreatment and mixed ZnO-Zn(OH)2 nanoparticles for hydrophobic property

    Samroeng NARAKAEW, Sittipong AU-PREE, Wipanoot BAISON, Siwat THUNGPRASERT, Itsariya WATTALO, Pranpreeya JAIPOR, Theeraporn PROMANAN, Sukee SUKDEE, Pakorn SANTAKIJ, Chainet CHANOGKUN, Kanjana RUTTANATEERAWICHIEN, Aphiruk CHAISENA, Pattama APICHAI, Phiphop NARAKAEW
    109-117
    DOI: https://doi.org/10.55713/jmmm.v32i1.1226

  • Epoxidized natural rubber/silane modified silica nanocomposites prepared in latex stage

    Supat MOOLSIN, Duangkamon SAWANGKAN
    118-123
    DOI: https://doi.org/10.55713/jmmm.v32i1.1242

  • Synthesis and phosphate adsorption performance of elephant dung biochar modified with magnesium and iron

    Navod ABEYSINGHE, Kaewta JETSRISUPARB, K.H.T. KARUNARATHNA, E.P.S. CHANDANA, Siraprapa SUWANREE, Pornnapa KASEMSIRI, Prinya CHINDAPRASIRT, Jesper T.N. KNIJNENBURG
    124-133
    DOI: https://doi.org/10.55713/jmmm.v32i1.1243

  • Use of oil palm frond waste to reinforce poly(lactic acid) based composites with the improvement of interfacial adhesion by alkali treatment

    Nattakarn HONGSRIPHAN, Jidapa SUBSANGA, Pimpisa SUEBSAI, Sunisa SITTHIPONG, Pajaera PATANATHABUTR
    134-143
    DOI: https://doi.org/10.55713/jmmm.v32i1.1244

  • Design, development and characterization of a mid-frequency (35 khz) tonpilz transducer array from 0.675PMN-0.325PT piezoceramics

    Merve Nur ÇİFTÇİ, Berk DEĞİRMENCİ, Irem BÖBREK, Sedat ALKOY, Aykut AYKAÇ, Muhammet BOZ, Ayşe BERKSOY-YAVUZ, Ezgi YALCIN, Namik K. GOZUACIK, Ebru MENŞUR
    144-149
    DOI: https://doi.org/10.55713/jmmm.v32i1.1249