Development of Sr/Cao catalyst derived from cuttlebone (<i>Sepia officinalis</i>) for biodiesel production
DOI:
https://doi.org/10.55713/jmmm.v30i1.553บทคัดย่อ
Cuttlebone (Sepia officinalis) was used as a source of calcium oxide for biodiesel catalyst. The objective of this work is to present the bio-based catalyst prepared from cuttlebone. 1, 3, 5 and 10 %wt of strontium was loaded into calcium oxide powder derived from cuttlebone. Structural properties of Sr/CaO catalyst were evaluated by Fourier transform infrared and X-ray diffraction, respectively. There is no change on morphological properties of catalyst between Sr/CaO and pristine CaO. The homogeneous distribution of strontium was confirmed by EDX mapping technique. The specific surface area of powder was estimated to be 10-30 m2·g-1. The thermal stability of catalyst was stable up to 300°C. Preliminary investigation of catalyst for biodiesel was conducted by transesterification from commercial palm olein and methanol. The research work was successfully supported on bio-based economy project.Downloads
Download data is not yet available.
ดาวน์โหลด
เผยแพร่แล้ว
2020-03-26
วิธีการอ้างอิง
[1]
N. Tomano, A. Prokaew, S. Boonyuen, และ S. Ummartyotin, “Development of Sr/Cao catalyst derived from cuttlebone (<i>Sepia officinalis</i>) for biodiesel production”, J Met Mater Miner, ปี 30, ฉบับที่ 1, มี.ค. 2020.
ฉบับ
บท
Original Research Articles
การอนุญาต
ลิขสิทธิ์ (c) 2020 Journal of Metals, Materials and Minerals
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Authors who publish in this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.