Extraction of molybdenum from a spent HDS catalyst using alkali leaching reagent

Authors

  • Chatisa KANSOMKET School of Metallurgical Engineering, Institute of Engineering, Suranaree University of Technology, Suranaree, Muang, Nakhon Ratchasima 30000, Thailand
  • Piamsak LAOKHEN School of Metallurgical Engineering, Institute of Engineering, Suranaree University of Technology, Suranaree, Muang, Nakhon Ratchasima 30000, Thailand
  • Tanongsak YINGNAKORN School of Metallurgical Engineering, Institute of Engineering, Suranaree University of Technology, Suranaree, Muang, Nakhon Ratchasima 30000, Thailand
  • Tapany PATCHARAWIT School of Metallurgical Engineering, Institute of Engineering, Suranaree University of Technology, Suranaree, Muang, Nakhon Ratchasima 30000, Thailand
  • Sakhob KHUMKOA School of Metallurgical Engineering, Institute of Engineering, Suranaree University of Technology, Suranaree, Muang, Nakhon Ratchasima 30000, Thailand

DOI:

https://doi.org/10.55713/jmmm.v32i2.1252

Keywords:

recycling of metal, molybdenum, spent HDS catalyst, alkaline leaching, metal extraction

Abstract

This research investigated extraction of molybdenum from spent hydrodesulfurization (HDS) catalyst used in petroleum refinery. The spent HDS catalyst still however contains significant amounts of valuable metals such as molybdenum and nickel for example, thereby recovery of such metals are of great interest. Pyro-hydrometallurgical process was utilized in this research to selectively extract molybdenum from the spent HDS catalyst using alkali leaching reagent. The process start from calcination of spent HDS catalyst, alkali leaching using sodium carbonate, purification by carbon adsorption-desorption, precipitation of ammonium molybdate and finally calcination to give molybdenum trioxide (MoO3) as the final recycling product. Effects of calcination temperature (450℃ to 650℃) together with alkali concentration (1 M to 3 M Na2CO3), solid to liquid ratio (100 g×L-1 to 300 g×L-1) and leaching time (30 min to180 min) have been investigated. Calcination at 450℃ has shown to give the highest leaching efficiency. The optimum leaching condition, giving 97% leaching efficiency was determined to be 40 g×L-1 sodium carbonate concentration, 2 h-leaching time, 100 g×L-1 solid to liquid ratio and 90℃ leaching temperature, by controlling the temperature at 90℃ and the pH at 2, ammonium molybdate then precipitated. Calcination at 450℃ finally converted the obtained precipitate to molybdenum trioxide as the final recycling product of 99.5% purity.

Downloads

Download data is not yet available.

References

R. V. Mom, J. N. Louwen, J. W. M. Frenken, and I. M. N. Groot, “In situ observations of an active MoS2 model hydrodesulfurization catalyst,” Nature Communications, vol. 10, 2546, 2019.

S. Huang, J. Liu, C. Zhang, B. Hu, X. Wang, M. Wang, and X. Wang, “Extraction of molybdenum from spent HDS catalyst by two-stage roasting followed by water leaching,” Journal of Metals, vol. 71, no. 12, pp. 4681-4686, 2019.

S. Helveg, J. V. Lauritsen, E. Lægsgaard, I. Stensgaard, J. K. Nørskov, B. S. Clausen, H. Topsøe, and F. Besenbacher, “Atomic-scale structure of single-layer mos2 nanoclusters,” Physical Review Letters, vol. 84, no. 5, pp. 951-954, 2000.

S. S. Bello, C. Wang, M. Zhang, H. Gao, Z. Han, L. Shi, F. Su, and G. Xu, “A review on the reaction mechanism of hydro-desulfurization and hydrodenitrogenation in heavy oil upgrading,” Energy & Fuels, vol. 35, no. 14, pp. 10998-11016, 2021.

M. Marafi, and A. Stanislaus, “Spent catalyst waste management: A review – Part I- Development in hydroprocessing catalyst waste reduction and use,” Resource, Conservation and Recycling, vol. 52, no. 6, pp. 859-873, 2008.

A. Yaraş, and H. Arslanoğlu, “Extraction of selected metals from spent hydrodesulfurization catalyst using alkali leaching agent,” Separation Science and Technology, vol. 55, no. 11, pp. 1-12, 2020.

L. Zeng, and C. Y. Cheng, “A literature review of the recovery of molybdenum and vanadium from spent hydrodesulphurisation catalysts. Part I: Metallurgical processes,” Hydrometallurgy, vol. 98, no. 1-2, pp. 1-9, 2009.

L. Zeng, and C. Y. Cheng, “A literature review of the recovery of molybdenum and vanadium from spent hydrodesulphurisation catalysts: Part II Separation and purification,” Hydrometallurgy, vol. 98, no. 1-2, pp. 10-20, 2009.

M. Marafi, M. S. Rana, R. Navvamani, and H. Al-Sheeha, “Utilization of waste spent hydroprocessing catalyst: development of a process for full recovery of deposited metals and alumina support,” Waste Management and the Environment VI, WIT Transactions on Ecology and The Environment, WIT Press, vol. 163, pp. 237-249, 2012

I. Asghari, S. M. Mousavi, F. Amiri, and S. Tavassoli, “Bioleaching of spent refinery catalysts: A review,” Journal of Industrial and Engineering Chemistry, vol. 19, no. 4, pp. 1069-1081, 2013.

S. Ilhan, “Leaching of spent Ni-Mo hydrodesulphurization (HDS) catalyst in oxalic acid solutions,” The Minerals, Metals & Materials Series, Proceedings of the 3rd Pan American Materials Congress, pp. 557-564, 2017.

B. B. Kar, P. Datta, and V. N. Misra, “Spent catalyst: secondary source for molybdenum recovery,” Hydrometallurgy, vol. 72, no. 1-2, pp. 87-92, 2004.

K. H. Park, D. Mohapatra, and B. R. Reddy, “Selective recovery of molybdenum from spent HDS catalyst using oxidative soda ash leach/carbon absorption method,” Journal of Hazardous Materials, vol. 138, no. 2, pp. 311-316, 2006.

J-M. Yoo, J-C. Lee, B-S Kim, H. S. Lee, and J-K Jeong, “Leaching of nickel from a hydrodesulphurization spent catalyst with ammonium sulfate,” Journal of Chemical Engineering of Japan, vol. 37, no. 9, pp. 1129-1134, 2004.

G. L. Tilley, and C. M. Calif, “Recovery of metal values from spent catalysts,” United State Patent, no. 4,721,606, Jan. 26, 1988.

E. I. Wiewiorowski, L. R. Tinnin, and R. Crnojevich, “A cyclic process for recovery of metals from spent catalysts,” United State Patent, no. 4,670,229, Jan. 2, 1987.

D. Mohapatra, and K. H. Park, “Selective recovery of Mo, Co and Al from spent Co/Mo/γ -Al2O3 catalyst: Effect of calcination temperature,” Journal of Environmental Science and Health, Part A, vol. 42, no. 4, pp. 507-515, 2007.

A. S. Medvedev, and N. V. Malochkina, “Sublimation of molybdenum trioxide from exhausted catalysts employed for the purification of oil products,” Russian Journal of Non-Ferrous Metals, vol. 48, no. 2, pp. 114-117, 2007.

S. Sadighi, and S. K. M. Targhi, “Precipitation of biofuel from palm oil catalysis by ammonium molybdate in homogeneous,” Bulletin of Chemical Reaction Engineering & Catalyst, vol. 12, no. 1, pp. 49-54, 2016.

Downloads

Published

2022-06-30

How to Cite

[1]
C. KANSOMKET, P. LAOKHEN, T. YINGNAKORN, T. PATCHARAWIT, and S. KHUMKOA, “Extraction of molybdenum from a spent HDS catalyst using alkali leaching reagent”, J Met Mater Miner, vol. 32, no. 2, pp. 88–94, Jun. 2022.

Issue

Section

Original Research Articles

Most read articles by the same author(s)