Improvement of alkali resistance of glass fiber from basalt and lignite bottom ash mixture by addition of ZrO2 content
DOI:
https://doi.org/10.55713/jmmm.v31i2.1099คำสำคัญ:
Basalt fiber, lignite bottom ash, alkali resistance, glass fiberบทคัดย่อ
In this work, silica-rich basalt from Chai Badan, Lopburi province was melted with lignite bottom ash from Mae Moh power plant as fluxing agent. To improving the alkali resistance, the series of glass batch samples were varied amount of ZrO2 content by 0 wt% to 10 wt%. The batches were melted at 1500℃ and drawn into a fiber. The results found that the alkali resistance of basalt fiber sample increase with increasing of ZrO2 content up to 7.5 wt% ZrO2. The sample with 7.5 wt% ZrO2 performed the highest alkali resistance, while the sample with 5 wt% ZrO2 obtained the highest tensile strength. The alkali resistance of these basalt fibers was given by a formation of stable hydrated zirconium-rich layer retarding the preinitiation of OH- inside the surface. The corrosion of shell thickness of higher ZrO2 content fiber increased at a slower rate according to its higher alkali resistance. The excess addition of ZrO2 content up to 10 wt% in glass composition resulted in an increase of brittleness and weakness of the fiber caused by a defect from undissolved ZrO2 crystal in a fiber and its solubility limit.
Downloads
เอกสารอ้างอิง
H. Jamshaid, "Basalt fiber and its applications," Journal of Textile Engineering & Fashion Technology, vol. 1(6), pp. 254-255, 2017. DOI: https://doi.org/10.15406/jteft.2017.01.00041
J. Militký, V. R. Kovačič, and J. Rubnerová, "Influence of thermal treatment on tensile failure of basalt fibers," Engineering Fracture Mechanics, vol. 69(9), pp. 1025-1033, 2002.
V. Fiore, T. Scalici, G. Di Bella, and A. Valenza, "A review on basalt fibre and its composites," Composites Part B: Engineering, vol. 74, pp. 74-94, 2015. DOI: https://doi.org/10.1016/j.compositesb.2014.12.034
S. M. Barr, and A. S. MacDonald, "Geochemistry and geo-chronology of late cenozoic basalts of southeast Asia," Bulletin of the Geological Society of America, Article vol. 92, no. 8 PART2, pp. 1069-1142, 1981. DOI: https://doi.org/10.1130/GSAB-P2-92-1069
S. Intasopa, T. Dunn, and R. S. Lambert, "Geochemistry of Cenozoic basaltic and silicic magmas in the central portion of the Loei–Phetchabun volcanic belt, Lop Buri, Thailand," Canadian Journal of Earth Sciences, vol. 32(4), pp. 393-409, 1995. DOI: https://doi.org/10.1139/e95-034
V. Dhand, G. Mittal, K. Y. Rhee, S. -J. Park, and D. Hui, "A short review on basalt fiber reinforced polymer composites," Composites Part B: Engineering, vol. 73, pp. 166-180, 2015. DOI: https://doi.org/10.1016/j.compositesb.2014.12.011
J. Militký, V. Kovačič, and J. Rubnerová, "Influence of thermal treatment on tensile failure of basalt fibers," Engineering Fracture Mechanics, Article vol. 69(9), pp. 1025-1033, 2002. DOI: https://doi.org/10.1016/S0013-7944(01)00119-9
T. Deák, and T. Czigány, "Chemical Composition and Mechanical Properties of Basalt and Glass Fibers: A Comparison," Textile Research Journal, Article vol. 79(7), pp. 645-651, 2009. DOI: https://doi.org/10.1177/0040517508095597
A. Sathonsaowaphak, P. Chindaprasirt, and K. Pimraksa, "Workability and strength of lignite bottom ash geopolymer mortar," Journal of Hazardous Materials, vol. 168(1), pp. 44-50, 2009. DOI: https://doi.org/10.1016/j.jhazmat.2009.01.120
N. Arabi, L. Molez, and D. Rangeard, "Durability of alkali-resistant glass fibers reinforced cement composite: Microstructural observations of degradation," Periodica Polytechnica Civil Engineering, Article vol. 62(3), 2018. DOI: https://doi.org/10.3311/PPci.10631
A. Bentur, and S. Mindess, Fiber Reinforced Cementitious Composites, second edition ed. London and New York: Taylor and Francis, 1990.
R. J. Charles, "Static Fatigue of Glass. I," Journal of Applied Physics, vol. 29(11), pp. 1549-1553, 1958. DOI: https://doi.org/10.1063/1.1722991
S. I. Gutnikov, A. P. Malakho, B. I. Lazoryak, and V. S. Loginov, "Influence of alumina on the properties of continuous basalt fibers," Russian Journal of Inorganic Chemistry, Article vol. 54(2), pp. 191-196, 2009. DOI: https://doi.org/10.1134/S0036023609020041
B. E. Ramachandran, V. Velpari, and N. Balasubramanian, "Chemical durability studies on basalt fibres," Journal of Materials Science, Article vol. 16(12), pp. 3393-3397, 1981. DOI: https://doi.org/10.1007/BF00586301
A. J. Majumdar, J. M. West, and L. J. Larner, "Properties of glass fibres in cement environment," Journal of Materials Science, Article vol. 12(5), pp. 927-936, 1977. DOI: https://doi.org/10.1007/BF00540975
V. A. Rybin, A. V. Utkin, and N. I. Baklanova, "Alkali resistance, microstructural and mechanical performance of zirconia-coated basalt fibers," Cement and Concrete Research, Article vol. 53, pp. 1-8, 2013. DOI: https://doi.org/10.1016/j.cemconres.2013.06.002
S. L. Gao, E. Mäder, and R. Plonka, "Coatings for glass fibers in a cementitious matrix," Acta Materialia, Article vol. 52(16), pp. 4745-4755, 2004. DOI: https://doi.org/10.1016/j.actamat.2004.06.028
A. Nourredine, "Influence of curing conditions on durability of alkali-resistant glass fibres in cement matrix," Bulletin of Materials Science, Article vol. 34(4), pp. 775-783, 2011. DOI: https://doi.org/10.1007/s12034-011-0194-1
M. Butler, V. Mechtcherine, and S. Hempel, "Durability of textile reinforced concrete made with AR glass fibre: Effect of the matrix composition," Materials and Structures/ Materiaux et Constructions, Article vol. 43(10), pp. 1351-1368, 2010. DOI: https://doi.org/10.1617/s11527-010-9586-8
Y. V. Lipatov, S. I. Gutnikov, M. S. Manylov, and B. I. Lazoryak, "Effect of ZrO2 on the alkali resistance and mechanical properties of basalt fibers," Inorganic Materials, Article vol. 48(7), pp. 751-756, 2012. DOI: https://doi.org/10.1134/S0020168512060106
M. Kukizaki, "Large-scale production of alkali-resistant Shirasu porous glass (SPG) membranes: Influence of ZrO2 addition on crystallization and phase separation in Na2O-CaO-Al2O3-B2O3-SiO2 glasses; and alkali durability and pore morphology of the membranes," Journal of Membrane Science, Article vol. 360(1-2), pp. 426-435, 2010. DOI: https://doi.org/10.1016/j.memsci.2010.05.042
Y. V. Lipatov, S. I. Gutnikov, M. S. Manylov, E .S. Zhukovskaya, and B. I. Lazoryak, "High alkali-resistant basalt fiber for reinforcing concrete," Materials & Design, vol. 73, pp. 60-66, 2015. DOI: https://doi.org/10.1016/j.matdes.2015.02.022
K. Kamiya, S. Sakka, and Y. Tatemichi, "Preparation of glass fibres of the ZrO2-SiO2 and Na2O-ZrO2-SiO2 systems from metal alkoxides and their resistance to alkaline solution," Journal of Materials Science, Article vol. 15(7), pp. 1765-1771, 1980. DOI: https://doi.org/10.1007/BF00550596
M. Butler, V. Mechtcherine, and S. Hempel, "Experimental investigations on the durability of fibre-matrix interfaces in textile-reinforced concrete," Cement and Concrete Composites, Article vol. 31(4), pp. 221-231, 2009. DOI: https://doi.org/10.1016/j.cemconcomp.2009.02.005
A. Rungchet, C. S. Poon, P. Chindaprasirt, and K. Pimraksa, "Synthesis of low-temperature calcium sulfoaluminate-belite cements from industrial wastes and their hydration: Comparative studies between lignite fly ash and bottom ash," Cement and Concrete Composites, vol. 83, pp. 10-19, 2017. DOI: https://doi.org/10.1016/j.cemconcomp.2017.06.013
S. Matsuya and M. Yamane, "Decomposition of gypsum bonded investments," (in eng), J Dent Res, vol. 60(8), pp. 1418-1423, 1981. DOI: https://doi.org/10.1177/00220345810600080501
N. Vaiborisut, C. Chunwises, D. Boonbundit, S. Jiemsirilers, and A. Theerapapvisetpong, "Effect of the Addition of ZrSiO4 on Alkali-Resistance and Liquidus Temperature of Basaltic Glass," Key Engineering Materials, vol. 766, pp. 145-150, 2018. DOI: https://doi.org/10.4028/www.scientific.net/KEM.766.145
R. Karell, J. Kraxner, and M. Chromčíková, "Properties of selected zirconia containing silicate glasses," Ceramics - Silikaty, Article vol. 50(2), pp. 78-82, 2006. [Online]. Available: https://www.scopus.com/inward/record.uri?eid=2-s2.0-33745867238&partnerID=40&md5=5f0eec8d4bf5e202d727f5e4072bfe73.
V. A. Rybin, А. V. Utkin, and N. I. Baklanova, "Corrosion of uncoated and oxide-coated basalt fibre in different alkaline media," Corrosion Science, vol. 102, pp. 503-509, 2016. DOI: https://doi.org/10.1016/j.corsci.2015.11.004
Q. Wang, Y. Ding, and N. Randl, "Investigation on the alkali resistance of basalt fiber and its textile in different alkaline environments," Construction and Building Materials, vol. 272, pp. 121670, 2021. DOI: https://doi.org/10.1016/j.conbuildmat.2020.121670
ดาวน์โหลด
เผยแพร่แล้ว
วิธีการอ้างอิง
ฉบับ
บท
การอนุญาต
ลิขสิทธิ์ (c) 2021 Journal of Metals, Materials and Minerals
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Authors who publish in this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
