Vol. 31 No. 2 (2021)

Published: 2021-06-28

Original Research Articles

  • Analysis of the impact factors from the friction stir welding process for dissimilar butt joints between semi-solid cast aluminum 356 and AISI 1018 carbon steel

    Worapong Boonchouytan, Jaknarin Chatthong, Rommador Burapa
    1-9
    DOI: https://doi.org/10.55713/jmmm.v31i2.1003

  • Synthesis of a two-part geopolymer from red mud and silica fume

    Arup Kumar Mandal
    10-18
    DOI: https://doi.org/10.55713/jmmm.v31i2.1004

  • Study of mechanical properties and characteristics of eco-fibres for sustainable children's clothing

    Siti Shukhaila SHAHARUDDIN, Marzie Hatef JALIL, Kaveh MOGHADASI
    19-26
    DOI: https://doi.org/10.55713/jmmm.v31i2.1006

  • Eco-friendly lake pigment from sappanwood: Adsorption study and its application as natural colorant for natural rubber toy balloon

    Jitnapa SIRIRAK, Ployphat SUPPHARATTHANYA, Kedsarin CHANTHA, Sutinee GIRDTHEP, Supanee CHAYABUTRA
    27-37
    DOI: https://doi.org/10.55713/jmmm.v31i2.1009

  • Effect of micro graphite particles on the microstructure and mechanical behavior of aluminium 6061 (Al-Mg-Si) alloy composites developed by novel two step casting technique

    Madeva NAGARAL, Raghavendra Pai K, V Auradi, Bharath V, Shanawaz Patil, Mahantesh S Tattimani
    38-45
    DOI: https://doi.org/10.55713/jmmm.v31i2.1046

  • Sustainable valorization of sugarcane leaves for succinic acid and biochar production

    Nuttaporn CHOKESAWATANAKIT, Pasakorn JUTAKRIDSADA, Khanita KAMWILAISAK
    46-53
    DOI: https://doi.org/10.55713/jmmm.v31i2.1048

  • Assessment of hydrothermal parameters on alkaline activation of fly ashes using a central composite design

    Ivan SUPELANO GARCÍA, César Armando ORTÍZ OTÁLORA, Carlos Arturo PARRA VARGAS, Julieth Alexandr MEJÍA GÓMEZ
    54-61
    DOI: https://doi.org/10.55713/jmmm.v31i2.1050

  • Laser powder bed fusion of Ti6Al4V-xCu: Process parameters

    Thywill Ccphas DZOGBEWU
    62-70
    DOI: https://doi.org/10.55713/jmmm.v31i2.1051

  • The enhancement of ethanol gas sensors response based on calcium and zinc co-doped LaFeO3/Fe2O3 thick film ceramics utilizing yarosite minerals extraction as Fe2O3 precursor

    Endi SUHENDI, Zeany Luckyta AMANDA, Muhamad Taufik ULHAKIM, Andhy SETIAWAN, Dani Gustaman SYARIF
    71-77
    DOI: https://doi.org/10.55713/jmmm.v31i2.1053

  • Using shrimp shells as based catalysts for FAME production from palm oil feedstock

    Assadaporn POONANAN, Anupat PRUKPAIBOON, Paul Egwuonw DIM, Mutsee TERMTANUN
    78-83
    DOI: https://doi.org/10.55713/jmmm.v31i2.1055

  • Debinding behaviour and sintering temperature-dependent features of coloured zirconia fabricated by ceramic injection moulding

    Wantanee BUGGAKUPTA, Thanakorn WASANAPIARNPONG, Nutthita CHUANKRERKKUL
    84-88
    DOI: https://doi.org/10.55713/jmmm.v31i2.1056

  • Effects of annealing treatment on microstructure and hardness in the 28 wt% Cr cast iron with Mo/W addition

    Kittikhun RUANGCHAI, Ruangdaj TONGSRI, John Thomas Harry PEARCE, Torranin CHAIRUANGSRI, Amporn WIENGMOON
    89-95
    DOI: https://doi.org/10.55713/jmmm.v31i2.1059

  • Preparation of transparent alumina thin films deposited by RF magnetron sputtering

    Busarin NOIKAEW, Laksana WANGMOOKLANG, Saisamorn NIYOMSOAN, Siriporn LARPKIATTAWORN
    96-103
    DOI: https://doi.org/10.55713/jmmm.v31i2.1066

  • Mechanical properties and ionic conductivity of biodegradable materials in solid polymer electrolyte

    Fatin Farhana AWANG, Mohd Faiz HASSAN, Khadijah Hilmun KAMARUDIN
    104-109
    DOI: https://doi.org/10.55713/jmmm.v31i2.1071

  • Development of chemically grafted multiwall carbon nanotube onto cellulose fiber sheet and polyurethane based resin composite for an active paper

    Siripassorn SUKHKHAWUTTIGIT, Sarute UMMARTYOTIN, Yingyot INFAHSAENG
    110-117
    DOI: https://doi.org/10.55713/jmmm.v31i2.1075

  • Investigation of deposition parameters on the structural properties and hardness of TiAlN films deposited via reactive pulsed DC magnetron sputteringInvestigation of deposition parameters on structural properties and hardness of TiAlN films deposited by reactive pulsed DC magnetron sputtering

    Jariyaporn RUKKUN, Kamon AIEMPANAKIT, Pimchanok REAKAUKOT, Witthawat WONGPISAN, Kirati WAREE, Montri AIEMPANAKIT
    118-122
    DOI: https://doi.org/10.55713/jmmm.v31i2.1083

  • Electrochromic property of tungsten trioxide films prepared by DC magnetron sputtering with oblique angle deposition and thermal oxidation

    Chantana AIEMPANAKIT, Areeya CHANACHAI, Nattaya KANCHAI, Montri AIEMPANAKI, Kamon AIEMPANAKIT
    123-128
    DOI: https://doi.org/10.55713/jmmm.v31i2.1084

  • Influence of cooling conditions on microstructure and mechanical property of Sn-0.3Ag-0.7Cu lead-free solder

    Prajak JATTAKUL, Tavee MADSA, Piyawan SUNASUAN, Niwat MOOKAM
    129-136
    DOI: https://doi.org/10.55713/jmmm.v31i2.1085

  • Improving corrosion resistance of 3D printed Ti-6Al-4V by TiN coating

    Surada NISAIMUN, Phitsanu POOLCHARUANSIN, Patama VISUTTIPITUKUL, Pitichon KLOMJIT
    137-146
    DOI: https://doi.org/10.55713/jmmm.v31i2.1096

  • Improvement of alkali resistance of glass fiber from basalt and lignite bottom ash mixture by addition of ZrO2 content

    Apirat THEERAPAPVISETPONG, Phraethong KWANPANNGAM, Thanapat TAMRONGWONGWI
    147-153
    DOI: https://doi.org/10.55713/jmmm.v31i2.1099