Sintered properties of 409L powder compacts influenced by metal powder additives

ผู้แต่ง

  • Ornmanee Coovattanachai Powder Metallurgy Research and Development Unit (PM_RDU) National Metal and Materials Technology Center
  • Thanyaporn Yodkaew Powder Metallurgy Research and Development Unit (PM_RDU) National Metal and Materials Technology Center
  • Monnapas Morakotjinda Powder Metallurgy Research and Development Unit (PM_RDU) National Metal and Materials Technology Center
  • Nattaya Tosangthum Powder Metallurgy Research and Development Unit (PM_RDU) National Metal and Materials Technology Center
  • Rungthip Krataitong Powder Metallurgy Research and Development Unit (PM_RDU) National Metal and Materials Technology Center
  • Anan Daraphan Powder Metallurgy Research and Development Unit (PM_RDU) National Metal and Materials Technology Center
  • Bhanu Vetayanugul Powder Metallurgy Research and Development Unit (PM_RDU) National Metal and Materials Technology Center
  • Ruangdaj Tongsri Powder Metallurgy Research and Development Unit (PM_RDU) National Metal and Materials Technology Center

บทคัดย่อ

Sintering of powder compacts, prepared by admixing of 409L powder with 2-6 wt.% of copper and nickel powders was investigated. It was observed thatthe strength of the 409L-Cu specimens increased with increasing Cu content. In contrast, sintered densityand elongation decreased with increasing Cu content due to swelling effect. When 2 wt.% of Ni powders were added, sintered density and strengths were maximized. When Ni contents higher than 2 wt.% , the decrease of sintered density and strengths were attributed to the number of pores left by the original sites of Ni powder particles.

Downloads

Download data is not yet available.

เอกสารอ้างอิง

German, R.M. 1998. Powder Metallurgy of Iron and Steel.New York : John Wiley & Sons.

Engstrom, U. 2003. Copper in P/M Steels. Int. J. Powder Metall. 39(4) : 29-39.

Coovattanachai, O. 2002. Infiltration and Liquid Phase Sintering of Stainless Steel Powder Type 409L with Copper. Master Thesis, Chulalongkorn University, Bangkok, Thailand.

Coovattanachai, O., Tosangthum, N. and Tongsri, R. 2004. Densification Behavior of 409L+Cu Powders Compacts. In : Advances in Powder Metallurgy and Particulate Materials. Princeton. N.J. : Metal Powder Industries Federation. (7-137) - (7-147).

Hoganas, A.B. 1997. Hoganas Handbook for Sintered Components, Handbook 3 : 9.15- 9.30.

ดาวน์โหลด

เผยแพร่แล้ว

2017-04-23

วิธีการอ้างอิง

[1]
O. . Coovattanachai, “Sintered properties of 409L powder compacts influenced by metal powder additives”, J Met Mater Miner, ปี 18, ฉบับที่ 1, เม.ย. 2017.

ฉบับ

ปีที่ 18 ฉบับที่ 1 (2008)

บท

Original Research Articles

การอนุญาต

ลิขสิทธิ์ (c) 2017 Journal of Metals, Materials and Minerals

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Authors who publish in this journal agree to the following terms:

    1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.

 

    1. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.

Most read articles by the same author(s)