ปีที่ 31 ฉบับที่ 1 (2021)

เผยแพร่แล้ว: 2021-03-28

บทความปริทรรศน์

  • Lightning strike response of composite structures: A review

    Akhileshwar PANDEY, Ashutosh Kumar UPADHYAY, Karunesh Kumar SHUKLA
    DOI: https://doi.org/10.55713/jmmm.v31i1.749

Original Research Articles

  • Graphene enhanced linear low-density polyethylene nanocomposites by premixing and melt compounding

    Wan Nazri WAN BUSU, Ruey Shan CHEN, Muhammad Jefri MOHD YUSOF, Sahrim AHMAD
    DOI: https://doi.org/10.55713/jmmm.v31i1.852

  • Wear behavior of Aluminium 6061 alloy reinforced with coated/uncoated multiwalled carbon nanotube and graphene

    Vijee KUMAR, Kempaiah Ujjaini NAGEGOWDA, Satish Babu BOPPANA, Ramesh SENGOTTUVELU, Palanikumar KAYAROGANAM
    DOI: https://doi.org/10.55713/jmmm.v31i1.917

  • Preparation of a mixed Al/Sc nano-oxide derived from the bauxite residue (red mud) via the sulfuric acid roasting–leaching–precipitation process

    Razieh HABIBPOUR, Eslam KASHI, Mehdi JANFADA
    DOI: https://doi.org/10.55713/jmmm.v31i1.962

  • Improvement on cost-performance ratio of fiberglass/carbon fiber hybrid composite

    Nathawat POOPAKDEE, Warut THAMMAWICHAI
    DOI: https://doi.org/10.55713/jmmm.v31i1.985

  • Efficiency of Tri-n-octylamine for the liquid-liquid extraction of Co (II) from acidic chloride medium

    Aishwarya MISHRA, Nilam SWAIN, Sanghamitra PRADHAN, Sujata MISHRA
    DOI: https://doi.org/10.55713/jmmm.v31i1.998

  • Interface characterization in tungsten fiber/Zr-based bulk metallic glass matrix composite

    Mohammad Ammar MOFID, Mostafa JAFARZADEGAN
    DOI: https://doi.org/10.55713/jmmm.v31i1.1002

  • Thermal behavior of solid acids in the Rb3H(SO4)2-RbHSO4 system under ambient atmosphere

    Chatr Panithipongwut KOWALSKI, Permpoon CHAIJAROEN, Farook KAEWNIYOM
    DOI: https://doi.org/10.55713/jmmm.v31i1.1008

  • Gas pressure and coating distance for nanohydroxyapatite deposition on stainless steel 316L using flame spray technique

    Angga SAPUTRA, Utami Dyah SYAFITRI, Toto SUDIRO, Gerald Ensang TIMUDA, Yessie Widya SARI
    DOI: https://doi.org/10.55713/jmmm.v31i1.1015

  • Microstructure and properties of zirconia-alumina composites fabricated via powder injection molding

    Nalattaporn SAELEE, Nutthita CHUANKRERKKUL, Panitarn WANAKAMOL
    DOI: https://doi.org/10.55713/jmmm.v31i1.1019

  • Enhancing stability and antioxidant efficacy of fisetin by encapsulating as β-cyclodextrin inclusion complex with porous polylactic acid film from breath figure

    Charasphat PREUKSARATTANAWUT, Warinyupa MANGMEE, Munchumas PROUSOONTORN, Ekasit NISARATTANAPORN, Krisana SIRALEARTMUKUL
    DOI: https://doi.org/10.55713/jmmm.v31i1.1028

  • On the mechanical properties of Al/Cu-grid/Al intermetallic composite

    Hamza ESSOUSSI, Said ETTAQI
    DOI: https://doi.org/10.55713/jmmm.v31i1.1054