Effect of pre-carbonization temperature on the porous structure and electrochemical properties of activated carbon fibers derived from kapok for supercapacitor applications

Nu Myat THAZIN; Nattapat CHAIAMMART; Myo Myo THU; Gasidit PANOMSUWAN

doi:10.55713/jmmm.v32i1.1247

ผู้แต่ง

Nu Myat THAZIN Department of Materials Engineering, Faculty of Engineering, Kasetsart University, Bangkok 10900, Thailand; International Collaborative Education Program for Materials Technology, Education, and Research (ICE-Matter), ASEAN University Network, Southeast Asia Engineering Education Development Network (AUN/SEED-Net), Bangkok, Thailand
Nattapat CHAIAMMART Department of Materials Engineering, Faculty of Engineering, Kasetsart University, Bangkok 10900, Thailand; Special Research Unit for Biomass Conversion Technology for Energy and Environmental Materials, Kasetsart University, Bangkok, Thailand
Myo Myo THU Department of Materials Engineering, Faculty of Engineering, Kasetsart University, Bangkok 10900, Thailand; International Collaborative Education Program for Materials Technology, Education, and Research (ICE-Matter), ASEAN University Network, Southeast Asia Engineering Education Development Network (AUN/SEED-Net), Bangkok, Thailand
Gasidit PANOMSUWAN Department of Materials Engineering, Faculty of Engineering, Kasetsart University, Bangkok 10900, Thailand; International Collaborative Education Program for Materials Technology, Education, and Research (ICE-Matter), ASEAN University Network, Southeast Asia Engineering Education Development Network (AUN/SEED-Net), Bangkok, Thailand; Special Research Unit for Biomass Conversion Technology for Energy and Environmental Materials, Kasetsart University, Bangkok, Thailand

DOI:

https://doi.org/10.55713/jmmm.v32i1.1247

คำสำคัญ:

Activated carbon fibers, Kapok, Pre-carbonization, Chemical activation, Supercapacitors

บทคัดย่อ

Activated carbon fibers (ACFs) were successfully synthesized from kapok via a two-step process: (i) pre-carbonization and (ii) chemical activation. The pre-carbonization temperature was varied at 300℃, 400℃, and 500℃. The mixing ratio of the pre-carbonized product and potassium hydroxide (KOH) was 3:1, while the activation temperature was 800℃. The effect of pre-carbonization temperature on the morphology, surface area and porosity, chemical functional group, and phase structure of ACFs was investigated and discussed. The characterization results showed that ACFs exhibited an amorphous carbon structure with a hollow fiber shape resembling the kapok. The specific surface area decreased from 487 m²×g^-1to 326 m²×g^-1as the pre-carbonization increased. The pore structure of ACFs possessed a major contribution of micropores, and mesopores became more dominant at a high pre-carbonization temperature. The potential use of ACFs as electrode materials in supercapacitors was electrochemically tested by cyclic voltammetry and galvanostatic charge-discharge measurements. The ACFs obtained from pre-carbonization at 500℃ had the highest specific capacitance of 31.9 F×g^-1 at a current density of 1 A×g^-1. The results in this work will be a helpful guideline for the further design and development of ACFs from kapok for supercapacitor applications.

Downloads

Download data is not yet available.

เอกสารอ้างอิง

N. Kularatna, "1 - Energy storage devices—a general overview," in Energy Storage Devices for Electronic Systems, N. Kularatna, Ed. Boston: Academic Press, 2015, pp. 1-28.

A. Ter-Gazarian, "Introduction - energy conversion: From primary sources to consumers," in Energy Storage for Power Systems, Institution of Engineering and Technology, pp. 1-4. [Online]. Available: https://app.knovel.com/hotlink/pdf/id:kt00486SA6/ energy-storage-power/introduction-energy-conversion

A. González, E. Goikolea, J. A. Barrena, and R. Mysyk, "Review on supercapacitor: Technologies and materials," Renewable and Sustainable Energy Review, vol. 58, pp. 1189-1206, 2016.

P. Siwatch, K. Sharma, A. Arora, and S. K. Tripathi, "Review of supercapacitors: Materials and devices," Journal of Energy Storage, vol. 21, pp. 801-825, 2019.

S. Liu, L. Wei, and H. Wang, "Review on reliability of super-capacitors in energy storage applications," Journal of Applied Energy, vol. 278, p. 115436, 2020.

P. Sharma, and T.S. Bhatti, "A review on electrochemical double-layer capacitors," Energy Conversion and Management, vol. 51, pp. 2901-2912, 2010.

S. Fleischmann, J. B. Mitchell, R. Wang, C. Zhan, D. Jiang, V. Presser, and V. Augustyn, “Pseudocapacitance: From fundamental understanding to high power energy storage materials,” Chemical Reviews, vol. 120, pp. 6738-6782

D. P. Chatterjee, and A. K. Nandi, “A review on the recent advances in hybrid supercapacitors,” Journal of Materials Chemistry A, vol. 9, pp. 15880-15918, 2021.

Z. Bi, Q. Kong, Y. Cao, G. Sun, F. Su, X. Wei, X. Li, A. Ahmad, L. Xie, and C.-M. Chen, “Biomass-derived porous carbon materials with different dimensions for supercapacitor electrodes: a review,” Journal of Materials Chemistry A, vol. 7, pp. 16028-17045, 2019.

Y. Wang, Q. Qu, S. Gao, G. Tang, K. Liu, S. He, and C. Huang, “Biomass derived carbon as binder-free electrode materials for supercapacitors,” Carbon, vol. 155, pp. 706-726, 2019.

S. Saini, P. Chand, and A. Joshi, “Biomass derived carbon for supercapacitor applications: Review,” Journal of Energy Storage, vol. 39, p. 10246, 2021.

Y. J. Kim, Y. Abe, T. Yanagiura, K. C. Park, M. Shimizu, T. Iwazaki, S. Nakagawa, M. Endo, and M. S. Dresselhaus, “Easy preparation of nitrogen-enriched carbon materials from peptides of silk fibroins and their use to produce a high volumetric energy density in supercapacitors,” Carbon, vol. 45, pp. 2116-2125, 2007.

Y. Liu, Z. Shi, Y. Gao, W. An, Z. Cao, and J. Liu, “Biomass-swelling assisted synthesis of hierarchical porous carbon fibers for supercapacitor electrodes,” ACS Applied Materials Interfaces, vol. 8, pp. 28283-28290, 2016.

P. Cheng, T. Li, H. Yu, L. Zhi, Z. Liu, and Z. Lei, “Biomass-derived carbon fiber aerogel as a binder-free electrode for high-rate supercapacitors,” The Journal of Physical Chemistry C, vol. 120, pp. 2079-2086, 2016.

X.-L. Su, S. Jiang, G.-P. Zheng, X.-C. Zheng, J.-H. Yang, and Z.-Y. Liu, “High-performance supercapacitors based on porous activated carbons from cattail wool,” Journal of Materials Science, vol. 53, pp. 9191-9205, 2018.

M. Li, H. Xiao, T. Zhang, Q. Li, and Y. Zhao, “Activated carbon fiber derived from sisal with large specific surface area for high-performance supercapacitors,” ACS Sustainable Chemistry Engineering, vol. 7, pp. 4716-4723, 2019.

J.-T. Chung, K.-J. Hwang, W.-G. Shim, C. Kim, J.-Y. Park, D.-Y. Choi, and J.-W. Lee, Synthesis and characterization of activated hollow carbon fibers from Ceiba pentandra (L.) Gaertn. (kapok),” Materials Letters, vol. 93, pp. 401-403, 2013.

Y. Cao, L. Xie, G. Sun, F. Su, Q.-Q. Kong, F. Li, W. Ma, J Shi, D. Jiang, C. Lu, and C.-M. Chen, “Hollow carbon microtubes from kapok fiber: structural evolution and energy storage performance,” Sustainable Energy & Fuels, vol. 2, pp. 455-465, 2018.

V. Subramanian, C. Luo, A. M. Stephan, K. S. Nahm, S. Thomas, and B. Wei, “Supercapacitors from activated carbon derived from banana fibers,” The Journal of Physical Chemistry C, vol. 111, pp. 7527-7531, 2007.

A. Linares-Solano, and D. Cazorla-Amorós, “Activated Carbon Fibers,” in Handbook of Advanced Ceramics, Elsevier, 2013, pp. 155-169.

J. Phiri, J. Dou, T. Vuorinen, P. A. C. Gane, and T. C. Maloney, “Highly porous willow wood-derived activated carbon for high-performance supercapacitor electrodes,” ACS Omega, vol. 4, pp. 18108-18117, 2019.

S.-X. Liang, F.-F. Duan, Q.-F. Liu, and H. Yang, “Hierarchical biocarbons with controlled micropores and mesopores derived from kapok fruit peels for high-performance supercapacitor electrodes,” ACS Omega, vol. 4, pp. 5991-5999, 2019.

X. Bai, Z. Wang, J. Luo, W. Wu, Y. Laing, X. Tong, and Z. Zhao, “Hierarchical porous carbon with interconnected ordered pores from biowaste for high-performance supercapacitor electrodes,” Nanoscale Research Letters, vol. 15, p. 88, 2020.

K. Hina, H. Zou, W. Qian, D. Zuo, and C. Yi, “Preparation and performance comparison of cellulose-based activated carbon fibres,” Cellulose, vol. 140, pp. 465-476, 2018.

H. Yang, R. Yan, H. Chen, D. Ho.Lee, and C. Zheng, “Characteristics of hemicellulose, cellulose and lignin pyrolysis,” Fuel, vol. 86, pp. 1781-1788, 2007.

C. L. Waters, R. R. Janupala, R. G.Mallinson, and L. L. Lobban, “Staged thermal fractionation for segregation of lignin and cellulose pyrolysis products: An experimental study of residence time and temperature effects,” Journal of Analytical and Applied Pyrolysis, vol. 126, pp. 380-389, 2017.

Q. Tian, X. Wang, X. Xu, M. Zhang, L. Wang, X. Zhao, Z. An, H. Yao, and J. Gao, “A novel porous carbon material made from wild rice stem and its application in supercapacitors,” Materials Chemistry Physics, vol. 213, pp. 267-276, 2018.

S. F. S. Draman, R. Daik, F. A. Latif, and S. M. El-Sheikh, “Characterization and thermal decomposition kinetics of kapok (Ceiba pentandra L.)–based cellulose,” Bioresources, vol. 9, pp. 8-23, 2014.

N. Paksung, J. Pfersich, P. J. Arauzo, D. Jung, and A. Kruse, “Structural effects of cellulose on hydrolysis and carbonization behavior during hydrothermal treatment,” ACS Omega, vol. 51, pp. 12210-12223, 2020.

L. Qin, Z. Hou, S. Zhang, W. Zhang, and E. Jiang, “Super-capacitive charge storage properties of porous carbons derived from pine nut shells,” Journal of Electroanalysis Chemistry, vol. 866, p. 114140, 2020.

L. Chunlan, X. Shaoping, G. Yixiong, L. Shuqin, and L. Changhou, “Effect of pre-carbonization of petroleum cokes on chemical activation process with KOH,” Carbon, vol. 43, no. 11, pp. 2295-2301, 2005.

E. Jang, S. W. Choi, and K. B. Lee, “Effect of carbonization temperature on the physical properties and CO2 adsorption behavior of petroleum coke-derived porous carbon,” Fuel, vol. 248, pp. 85-92, 2019.

J. Deng, T. Xiong, H. Wang, A. Zheng, and Y. Wang, “Effects of cellulose, hemicellulose, and lignin on the structure and morphology of porous carbons,” ACS Sustainable Chemistry Engineering, vol. 4, pp. 3750-3756, 2016.

K. S. W. Sing, D. H. Everett, E. A. W. Haul, L. Moscou, R. A. Pierotti, J. Rouquérol, and T. Siemieniewska, “Reporting physisorption data for gas/solid systems with special reference to the determination of surface area and porosity,” Pure Applied Chemistry, vol. 57, pp. 603-619, 1985.

K. S. W. Sing, and R. T. Williams, “Physisorption hysteresis loops and the characterization of nanoporous materials,” Adsorption Science and Technology, vol. 22, pp. 733-782, 2004.

W. Lai, S. Yang, Y. Jiang, F. Zhao, Z. Li, B. Zaman, M. Fayaz, X. Li, and Y. Chen, “Artefact peaks of pore size distributions caused by unclosed sorption isotherm and tensile strength effect,” Adsorption, Vol. 26, pp. 633-644, 2020.

R. Ojeda-López, G. Ramos-Sánchez, C. García-Mendoza, D. C. S. Azevedo, A. Guzmán-Vagas, and C. Felipe, “Effect of calcination temperature and chemical composition of PAN-derived carbon microfibers on N2, CO2, and CH4 adsorption,” Materials, vol .14, no. 14, pp. 3914, 2021.

P. Zhang, S. Xie, Y. Qiu, Y. Jiao, C. ji, Y. Li, H. Fan, and X. Li, “Facile preparation of porous carbon nanomaterials for robust supercapacitors,” Journal of Materials Research, vol. 33, pp. 1142-1154, 2018.

A. Saning, S. Herou, D. Dechtrirat, C. Ieosakulrat, P. Pakawatpanurut, S. Kaowphong, C. Thanachayanont, M.-M. Titirici, and L. Chuenchom, “Green and sustainable zero-waste conversion of water hyacinth (Eichhornia crassipes) into superior magnetic carbon composite adsorbents and supercapacitor electrodes,” RSC Advances, vol. 9, 24248-24258, 2019.

T. S. Mathis, N. Kurra, X. Wang, D. Pinto, P. Simon, and Y. Gogotsi, “Energy storage data reporting in perspective – Guidelines for interpreting the performance of electrochemical energy storage systems", Advanced Energy Materials, vol. 9, p. 1902007, 2019.

C. Wei, J. Yu, X. Yang, and G. Zhang, “Activated carbon fibers with hierarchical nanostructure derived from waste cotton gloves as high-performance electrodes for supercapacitors,” Nanoscale Research Letters, vol. 12, p. 379, 2017.

L.-H. Zheng, M.-H. Chen, Shu-Xia Liang, and Q-F Lü, Oxygen-rich hierarchical porous carbon derived from biomass waste-kapok flower for supercapacitor electrode,” Diamond and Related Materials, vol. 113, p. 108267, 2021.

Y. Lu, S. Zhang, J. Yin, C. Bai, J. Zhang, Y. Li, Y. Yang, Z. Ge, L. Wei, M. ma, Y. Ma, and Y. Chen, “Mesoporous activated carbon materials with ultrahigh mesopore volume and effective specific surface area for high performance supercapacitors,” Carbon, vol. 124, pp. 64-71, 2017.

J. Yang, H. Wu, M. Zhu, W. Ren, Y. Lin, H. Chen, and F. Pan, “Optimized mesopores enabling enhanced rate performance in novel ultrahigh surface area meso-/microporous carbon for supercapacitors,” Nano Energy, vol. 33, pp. 453-461, 2017.

S. Herou, M. C. Ribadeneyra, R. Madhu, V. Araullo-Peters, A. Jensen, P.Schlee, and M. Titirici, “Ordered mesoporous carbons from lignin: a new class of biobased electrodes for supercapacitors,” Green Chemistry, vol. 21, pp. 550-559, 2019.

Y. Zhang, C. Wu, S. Dai, L. Liu, H. Zhang, W. Shen, W. Sun, and C. M. Li, “Rationally tuning ratio of micro- to meso-pores of biomass-derived ultrathin carbon sheets toward supercapacitors with high energy and high power density,” Journal of Colloid and Interface Science, vol. 600, pp. 817-825, 2022.