Two-step sputtering for depositing smooth and thin ZnO films on non-heated, non-epiready PET substrates
DOI:
https://doi.org/10.55713/jmmm.v36i2.2461คำสำคัญ:
Oxide material, Flexible substrate, Sputtering, Surface, Crystallinityบทคัดย่อ
Highly crystalline, smooth-surface, and thin zinc oxide (ZnO) films have been successfully deposited on flexible polyethylene terephthalate (PET) substrates using an optimized two-step RF magnetron sputtering technique at ambient temperature. The PET used in this study was a commercially available overhead projector film, which was not epiready-grade and had a lower melting point (~150℃). This issue made high-quality deposition more challenging. In the first step, a thin ZnO buffer layer was deposited at low RF power to provide a smooth and thermally stable surface. This layer served as both a structural template and a thermal barrier during the subsequent high-power deposition of the main ZnO film. Structural analysis confirmed that the buffer layer suppressed lattice mismatch and reduced residual stress. The resulting film showed low surface roughness and no cracking. These features exceeded those of films grown directly at high power, which suffered from poor surface morphology due to substrate deformation. Although the use of a polycrystalline buffer layer led to a reduction in optical transmittance from increased light scattering, the fine-grained structure contributed to improved mechanical stability and dielectric loss suppression. These characteristics made films particularly suitable for piezoelectric applications on flexible substrates. This proposed two-step technique effectively balanced between surface smoothness and structural quality and offered practical solution for the fabrication of high-performance films on thermally sensitive substrates.
Downloads
เอกสารอ้างอิง
N. Akin, Y. Ozen, H. I. Efkere, M. Cakmak, and S. Ozcelik, "Surface structure and photoluminescence properties of AZO thin films on polymer substrates," Surface and Interface Analysis, vol. 47, pp. 93–98, 2015. DOI: https://doi.org/10.1002/sia.5677
Y. Liu, X. Wang, Y. Han, and H. Chen, "Effect of deposition times of Al2O3 buffer layer on the structural and optical properties of AZO film on the polyethylene terephthalate substrates," Bulletin of Materials Science, vol. 41, pp. 106, 2018. DOI: https://doi.org/10.1007/s12034-018-1619-x
D. Dimitrov, C.-L. Tsai, S. Petrov, V. Marinova, D. Petrova, B. Napoleonov, B. Blagoev, V. Strijkova, K. Y. Hsu, and S. H. Lin, "Atomic layer-deposited Al-doped ZnO thin films for display applications," Coatings, vol. 10, no. 6, pp. 539, 2020. DOI: https://doi.org/10.3390/coatings10060539
A. G. Martinez-Lopez, J. C. Tinoco, E. A. Elvira-Hernández, and A. L. Herrera-May, "Solution-processed ZnO energy harvester devices based on flexible substrates," Microsystem Technologies, vol. 29, pp. 205–210, 2023. DOI: https://doi.org/10.1007/s00542-023-05411-2
S. Lee, K. Nam, W. Muhammad, D. Shin, S. Seo, and S.-D. Kim, "Influence of N2O plasma treatment on PET-based flexible bending sensors with ZnO nanorod array cross-linked with interdigitated electrode structures," Ceramics International, vol. 48, pp. 25696–25704, 2022. DOI: https://doi.org/10.1016/j.ceramint.2022.05.177
H.-L. Shen, H. Zhang, L.-F. Lu, F. Jiang, and C. Yang, "Preparation and properties of AZO thin films on different substrates," Progress in Natural Science: Materials International, vol. 20, pp. 44–48, 2010. DOI: https://doi.org/10.1016/S1002-0071(12)60005-7
B. P. Nabar, Z. Celik-Butler, and D. P. Butler, "Self-powered tactile pressure sensors using ordered crystalline ZnO nanorods on flexible substrates toward robotic skin and garments," IEEE Sensors Journal, vol. 15, pp. 63–70, 2015. DOI: https://doi.org/10.1109/JSEN.2014.2337115
N. Promsawat, W. Wannasiri, P. Prawpraewa, C. Khwanruedee, P. Kantapon, P. Methee, and P. Janphuang, "A study of flexible piezoelectric generators by sputtering ZnO thin film on PET substrate," Integrated Ferroelectrics, vol. 195, pp. 220–229, 2019. DOI: https://doi.org/10.1080/10584587.2019.1570035
P. Novák, "Possibilities of increasing the usability of sputtered AZO films as a transparent electrode," Physica Status Solidi (a), vol. 216, pp. 1800814, 2019. DOI: https://doi.org/10.1002/pssa.201800814
H. S. Jo, C.-W. Park, S. An, A. Aldalbahi, M. El-Newehy, S. S. Park, A. L. Yarin, and S. S. Yoon, "Wearable multifunctional soft sensor and contactless 3D scanner using supersonically sprayed silver nanowires, carbon nanotubes, zinc oxide, and PEDOT:PSS," NPG Asia Materials, vol. 14, pp. 23, 2022. DOI: https://doi.org/10.1038/s41427-022-00370-y
M. Wang, J. Wang, W. Chen, Y. Cui, and L. Wang, "Effect of preheating and annealing temperatures on quality characteristics of ZnO thin film prepared by sol–gel method," Materials Chemistry and Physics, vol. 97, pp. 219–225, 2006. DOI: https://doi.org/10.1016/j.matchemphys.2005.07.072
W. W. Qin, Y. T. Li, T. Li, J. W. Qiu, X. J. Ma, D. Wei, X. Chen, X. F. Hu, and W. Zhang, "Microstructure-related piezoelectric properties of a ZnO film grown on a Si substrate," Ceramics International, vol. 42, pp. 16927–16934, 2016. DOI: https://doi.org/10.1016/j.ceramint.2016.07.192
S. Fernández, and F. B. Naranjo, "Optimization of aluminum-doped zinc oxide films deposited at low temperature by radio-frequency sputtering on flexible substrates for solar cell applications," Solar Energy Materials and Solar Cells, vol. 94, pp. 157–163, 2010. DOI: https://doi.org/10.1016/j.solmat.2009.08.012
M.-C. Choi, Y. Kim, and C.-S. Ha, "Polymers for flexible displays: From material selection to device applications," Progress in Polymer Science, vol. 33, pp. 581–630, 2008. DOI: https://doi.org/10.1016/j.progpolymsci.2007.11.004
C. Lee, A. Park, Y. Cho, M. Park, W. I. Lee, and H. W. Kim, "Influence of ZnO buffer layer thickness on the electrical and optical properties of indium zinc oxide thin films deposited on PET substrates," Ceramics International, vol. 34, pp. 1093–1096, 2008. DOI: https://doi.org/10.1016/j.ceramint.2007.09.083
M. Hao, X. Lu, F. Sun, Y. Fu, Y. Ba, Y. Xie, and K. Liu, "Optoelectronic effect of Al-based buffer layers on Al-doped ZnO thin transparent conductive films on flexible substrates," Optical Materials, vol. 157, pp. 116179, 2024. DOI: https://doi.org/10.1016/j.optmat.2024.116179
A. N. Banerjee, C. K. Ghosh, K. K. Chattopadhyay, H. Minoura, A. K. Sarkar, A. Akiba, A. Kamiya, and T. Endo, "Low-temperature deposition of ZnO thin films on PET and glass substrates by DC-sputtering technique," Thin Solid Films, vol. 496, pp. 112–116, 2006. DOI: https://doi.org/10.1016/j.tsf.2005.08.258
S. Ahmad, N. D. Md Sin, M. N. Berhan, and M. Rusop, "Effect of RF power on the structural properties of magnetron sputtered ZnO thin films deposited at room temperature," Advanced Materials Research, vol. 626, pp. 163‒167, 2013. DOI: https://doi.org/10.4028/www.scientific.net/AMR.626.163
M. G. Faraj and K. Ibrahim, "Optical and structural properties of thermally evaporated zinc oxide thin films on polyethylene terephthalate substrates," International Journal of Polymer Science, vol. 2011, p. 302843, 2011. DOI: https://doi.org/10.1155/2011/302843
Z. Demircioğlu, E. Özkol, H. Nasser, and R. Turan, "Low temperature aluminum doped zinc oxide thin film deposition on ultra-thin flexible glass and PET substrates by RF magnetron sputtering," Physica Status Solidi (c), vol. 12, pp. 1215–1219, 2015. DOI: https://doi.org/10.1002/pssc.201510144
K. Tang, S. Huang, S. Gu, S. Zhu, J. Ye, Z. Xu, and Y. Zheng, "The roles of buffer layer thickness on the properties of the ZnO epitaxial films," Applied Surface Science, vol. 388, pp. 557–564, 2016. DOI: https://doi.org/10.1016/j.apsusc.2015.10.123
R. Hong, J. Shao, H. He, and Z. Fan, "Influence of buffer layer thickness on the structure and optical properties of ZnO thin films," Applied Surface Science, vol. 252, pp. 2888–2893, 2006. DOI: https://doi.org/10.1016/j.apsusc.2005.04.041
A. Nahhas, H. K. Kim, and J. Blachere, "Epitaxial growth of ZnO films on Si substrates using an epitaxial GaN buffer," Applied Physics Letters, vol. 78, pp. 1511–1513, 2001. DOI: https://doi.org/10.1063/1.1355296
M. Wang, Y. Yang, P. Lan, K. Zhu, J. Huang, Y. Lu, R. Tan, and W. Song, "Ultra-thin (002)-oriented Al-doped zinc oxide transparent electrode grown on oxygen-controlled homo-seed layer," Physica Status Solidi (RRL) – Rapid Research Letters, vol. 8, pp. 172–175, 2014. DOI: https://doi.org/10.1002/pssr.201308238
J.-C. Park, S.-J. Kang, D.-H. Chang, and Y.-S. Yoon, "Properties of IZTO thin films deposited on PET substrates with the SiO₂ buffer layer," Journal of the Korean Ceramic Society, vol. 52, pp. 72–76, 2015. DOI: https://doi.org/10.4191/kcers.2015.52.1.72
K. Koike, T. Komuro, K. Ogata, S. Sasa, M. Inoue, and M. Yano, "CaF2 growth as a buffer layer of ZnO/Si heteroepitaxy," Physica E: Low-dimensional Systems and Nanostructures, vol. 21, pp. 679–683, 2004. DOI: https://doi.org/10.1016/j.physe.2003.11.108
A. Miyake, H. Kominami, H. Tatsuoka, H. Kuwabara, Y. Nakanishi, and Y. Hatanaka, "Luminescent properties of ZnO thin films grown epitaxially on Si substrate," Journal of Crystal Growth, vols. 214–215, pp. 294–298, 2000. DOI: https://doi.org/10.1016/S0022-0248(00)00095-6
N. Kumar, A. H. Chowdhury, B. Bahrami, M. R. Khan, Q. Qiao, and M. Kumar, "Origin of enhanced carrier mobility and electrical conductivity in seed-layer assisted sputtered grown Al doped ZnO thin films," Thin Solid Films, vol. 700, pp. 137916, 2020. DOI: https://doi.org/10.1016/j.tsf.2020.137916
W. Dong, X. Zhu, R. Tao, and X. Fang, "Effect of homo-buffer layers on the optical properties of ZnO thin films grown by pulsed laser deposition on Si (100)," Journal of Materials Science: Materials in Electronics, vol. 19, pp. 538–542, 2008. DOI: https://doi.org/10.1007/s10854-007-9377-3
R. C. Chang, T. C. Li, and C. W. Lin, "Influence of various thickness metallic interlayers on opto-electric and mechanical properties of AZO thin films on PET substrates," Applied Surface Science, vol. 258, pp. 3732–3737, 2012. DOI: https://doi.org/10.1016/j.apsusc.2011.12.016
F. Jia, Q. Wang, D. L. Zhu, S. Han, P. J. Cao, W. J. Liu, Y. X. Zeng,
and Y. M. Lu, "Influence of ZnO buffer layers on the opto-electronic properties in Ga-doped ZnO thin films prepared by RF magnetron sputtering on PET substrates," Journal of Materials Science: Materials in Electronics, vol. 25, pp. 2934–2938, 2014. DOI: https://doi.org/10.1007/s10854-014-1962-7
C. Lee, S. Kim, M. Park, S. Y. Park, W. I. Lee, and B. Lee, "Effects of a ZnO buffer layer on the resistivity and transmittance of GZO/AZO multilayer films deposited by R. F. magnetron sputtering on polymer substrates," Transactions of the Materials Research Society of Japan, vol. 32, pp. 911–915, 2007. DOI: https://doi.org/10.14723/tmrsj.32.911
S. Kim, W. Lee, and C. Lee, "Influence of ZnO buffer layer thickness on electrical and optical properties of GZO thin films deposited on polymer substrates," Materials Science and Technology, vol. 23, pp. 303–306, 2007. DOI: https://doi.org/10.1179/174328407X158721
C. H. Tseng, C. H. Huang, H. C. Chang, D. Y. Chen, C. P. Chou, and C. Y. Hsu, "Structural and optoelectronic properties of Al-doped zinc oxide films deposited on flexible substrates by radio frequency magnetron sputtering," Thin Solid Films, vol. 519, pp. 7959–7965, 2011. DOI: https://doi.org/10.1016/j.tsf.2011.05.017
Y. Zhang, Z. Fei, H. Huang, T. Lü, and R. Mu, "Influence of ZnO cap layer morphology on the electrical properties and thermal stability of Al-doped ZnO films," Physica Status Solidi (a), vol. 217, p. 2000025, 2020. DOI: https://doi.org/10.1002/pssa.202000025
J. Tauc, R. Grigorovici, and A. Vancu, "Optical properties and electronic structure of amorphous germanium," Physica Status Solidi (b), vol. 15, pp. 627–637, 1966. DOI: https://doi.org/10.1002/pssb.19660150224
C.-Y. Tsay, and K.-C. Pai, "Properties of Al-Ga co-doped ZnO semiconductor thin films deposited on polyethylene terephthalate substrates by radio frequency magnetron sputtering," Thin Solid Films, vol. 654, pp. 11–15, 2018. DOI: https://doi.org/10.1016/j.tsf.2018.03.077
M. N. Rezaie, N. Manavizadeh, E. Nadimi, and F. A. Boroumand, "Quality enhancement of AZO thin films at various thicknesses by introducing ITO buffer layer," Journal of Materials Science: Materials in Electronics, vol. 28, pp. 9328–9337, 2017. DOI: https://doi.org/10.1007/s10854-017-6671-6
ดาวน์โหลด
เผยแพร่แล้ว
วิธีการอ้างอิง
ฉบับ
บท
Categories
การอนุญาต
ลิขสิทธิ์ (c) 2026 วารสารโลหะ, วัสดุ และแร่
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Authors who publish in this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
