Powder injection moulding of cemented carbides: Feedstock preparation and injection moulding

ผู้แต่ง

  • Nutthita Chuankrerkkul Metallurgy and Materials Science Research Institute, Chulalongkorn University
  • Peter F. Messer Department of Engineering Materials, University of Sheffield
  • Hywel A. Davies Department of Engineering Materials, University of Sheffield

คำสำคัญ:

powder injection moulding, cemented carbides, tungsten carbide-cobalt, PEG/PMMA composite binder

บทคัดย่อ

A composite binder system, successfully developed earlier for powder injection moulding of stainless steels, CoCrMo and NiCrSiB alloys, has been adapted for tungsten carbide-cobalt (WC-Co) cemented carbides. The binder consists of a major fraction of polyethylene glycol (PEG), which can be removed rapidly by leaching with water, a minor fraction of a finely dispersed polymethyl methacrylate (PMMA), which retains rigidity of the components and sometimes with stearic acid (SA) to act as a lubricant. The adjustments made to powder characteristics, binder compositions and process parameters to achieve successful injection moulding are reported. Feedstocks containing a powder loading of the WC-Co up to 60 vol% can be moulded successfully. The moulded specimens had good green strength, in the range 12-17 MPa for three point bend tests.

Downloads

Download data is not yet available.

เอกสารอ้างอิง

German, R. M. and Bose, A. 1997. Injection Moulding of Metals and Ceramics, Princeton, NJ. : Metal Powder Industries Federation.

Alcock, J. and Stephenson, D. The Powder Injection Moulding Process. (Online) Available at : http://www.azom.com/ Details.asp?ArticleID=1080 (accessed 15/3/2007).

Upadhyaya, G. S. 1998. Cemented Tungsten Carbides : Production, Properties, and Testing, Westwood, NJ. : Noyes Publications.

Anwar, M. Y., Messer, P. F., Ellis, B. and Davies, H. A. 1995. Injection moulding of 316L stainless steel powder using novel binder system. Powder Metall., 38(2) : 113 - 119.

Omar, M. A., Davies, H. A., Messer, P. F. and Ellis, B. 2001. The influence of PMMA content on the properties of 316L stainless steel MIM compact. J. Mater. Process Tech. 113 : 477-481.

Newell, M. A., Davies, H. A., Messer, P. F. and Greensmith, D. J. 2005. Metal injection moulding of scissors using hardenable stainless steel powders. Powder Metall. 48(3) : 227-230.

Bhero, S. W. 1999. Powder injection moulding of Co-Cr-Mo alloy and type 440 martensitic stainless steels. Doctoral The University of Sheffield.

Wong, S. H. 2003. Injection moulding of anorthite/mullite porcelain. Doctoral The University of Sheffield.

Chuankrerkkul, N. 2006. Powder injection moulding of WC-Co hardmetals using a PEG/PMMA binder. Doctoral The University of Sheffield.

Hamburg, M. and Young, P. 1994. Statistical Analysis for Decision Making. Fort Worth, TX. : The Dresden Press.

ดาวน์โหลด

เผยแพร่แล้ว

2017-04-23

วิธีการอ้างอิง

[1]
N. Chuankrerkkul, P. F. . Messer, และ H. A. . Davies, “Powder injection moulding of cemented carbides: Feedstock preparation and injection moulding”, J Met Mater Miner, ปี 17, ฉบับที่ 1, เม.ย. 2017.

ฉบับ

ปีที่ 17 ฉบับที่ 1 (2007)

บท

Original Research Articles

การอนุญาต

ลิขสิทธิ์ (c) 2017 Journal of Metals, Materials and Minerals

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Authors who publish in this journal agree to the following terms:

    1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.

 

    1. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.

Most read articles by the same author(s)