Highly ordered porous PLA films prepared by breath figure method

Charasphat Preuksarattanawut; Ekkasit Nisaratanaporn; Krisana Siralertmukul

doi:10.55713/jmmm.v29i4.536

ผู้แต่ง

Charasphat Preuksarattanawut Faculty of Engineering, Chulalongkorn University
Ekkasit Nisaratanaporn Faculty of Engineering, Chulalongkorn University
Krisana Siralertmukul Metallurgy and Materials Science Research Institute Chulalongkorn University

DOI:

https://doi.org/10.55713/jmmm.v29i4.536

คำสำคัญ:

Breath Figure, Poly(lactic acid), Porous film

บทคัดย่อ

Honeycomb-patterned porous biodegradable PLA film can be successfully prepared by the Breath Figure (BF) method, which is a self-assembly template and low-cost process. In this research, the fabrication was designed to create a convenient and simple process aimed at meeting commercial requirements. Production of regularly ordered pattern microporous film is carried out in a closed system with optimum conditions. Thus, important production factors â€”that is, the starting polymer concentration in solution, the type of solvent (which affects the solvent evaporation rate), and the relative humidity of the closed chamber â€”were investigated to identify the optimum conditions. The results showed that highly ordered porous film with smaller average pore size of 23.29Â±4.55 Âµm on strut was generated (19.98Â±2.82 Âµm) when high PLA concentration (10% wt PLA) in dichloromethane with 80-85% RH relative humidity was applied.

Downloads

Download data is not yet available.

ประวัติผู้แต่ง

Charasphat Preuksarattanawut, Faculty of Engineering, Chulalongkorn University

Master of Engineering: Metallurgical and Materials Engineering, CHulalongkorn University

Bachelor of Engineering: Metallurgical and Materials Engineering, CHulalongkorn University

เอกสารอ้างอิง

E. Menard, M. A. Meitl, Y. Sun, J. U. Park, D J. L. Shir, Y. S. Nam, S. Jeon, and J. A. Rogers, “Micro- and Nanopatterning Techniques for Organic Electronic and Optoelectronic Systems,” Chemical Reviews, vol. 107, no. 4, pp. 1117-1160 DOI: https://doi.org/10.1021/cr050139y

T. Nishikawa, M. Nonomura, K. Arai, Junko Hayashi, T. Sawadaishi, Y. Nishiura, M. Hara, and M. Shimomura, “Micropatterns Based on Deformation of a Viscoelastic Honeycomb Mesh,” Langmuir, vol. 19, no. 15, pp. 6193-6201 DOI: https://doi.org/10.1021/la0300129

D. Maniglio, Y. Ding, L. Wang, and C. Migliaresi, “One-step process to create porous structures in cross-linked polymer films via breath-figure formations during in situ crosslinking reactions,” Polymer, vol. 52, no. 22, pp. 5102-5106 DOI: https://doi.org/10.1016/j.polymer.2011.08.054

L. Li, Y. Zhong, J. Li, J. Gong, Y. Ben, J. Xu, X. Chen, and Z. Ma, “Breath figure lithography: A facile and versatile method for micropatterning,” Journal of Colloid and Interface Science, vol. 342, no. 1, pp. 192-197, 2010/02/01. DOI: https://doi.org/10.1016/j.jcis.2009.10.005

J. S. Arora, T. Ponnusamy, R. Zheng, P. Venkataraman, S. R. Raghavan, D. Blakec, and V. T. John, Spatially Directed Vesicle Capture in the Ordered Pores of Breath-Figure Polymer Films. 2015. DOI: https://doi.org/10.1039/C5SM01068C

J. Peng, Y. Han, Y. Yang, and B. Li, “The influencing factors on the macroporous formation in polymer films by water droplet templating,” Polymer, vol. 45, no. 2, pp. 447-452, 2004/01/01. DOI: https://doi.org/10.1016/j.polymer.2003.11.019

R. Zhang, J. Wang, M. Wang, and Y. He, “Fabrication of honeycomb polyvinyl butyral film under humidity provided by super saturated salt solutions,” Journal of Applied Polymer Science, Article vol. 124, no. 1, pp. 495-500, 2012. DOI: https://doi.org/10.1002/app.34795

C.-X. Liu, W.-Z. Lang, B.-B. Shi, and Y.-J. Guo, “Fabrication of ordered honeycomb porous polyvinyl chloride (PVC) films by breath figures method,” Materials Letters, vol. 107, pp. 53-55, 2013/09/15. DOI: https://doi.org/10.1016/j.matlet.2013.05.114

H. Yuan, B. Yu, H. Cong, Q. Peng, Z. Yang, Y. Luo, and M. Chi, “Preparation of highly permeable BPPO microfiltration membrane with binary porous structures on a colloidal crystal substrate by the breath figure method,” Journal of Colloid and Interface Science, vol. 461, pp. 232-238, 2016/01/01. DOI: https://doi.org/10.1016/j.jcis.2015.09.019

S. Miller and Z. Bao, “Fabrication of flexible pressure sensors with microstructured polydimethylsiloxane dielectrics using the breath figures method,” Journal of Materials Research, vol. 30, no. 23, pp. 3584-3594, 2015. DOI: https://doi.org/10.1557/jmr.2015.334

K. Kummerer, “Sustainable from the very beginning: rational design of molecules by life cycle engineering as an important approach for green pharmacy and green chemistry,” Green Chemistry, vol. 9, pp. 899-907, 2007. DOI: https://doi.org/10.1039/b618298b

H. Itoh, Y. Aso, M. Furuse, Y. Noishiki, and T. Miyata, A honeycomb collagen carrier for cell culture as a tissue engineering scaffold. 2001, pp. 213-7. DOI: https://doi.org/10.1046/j.1525-1594.2001.025003213.x

Y. Hiroshi, “Fabrication of honeycomb films by the breath figure technique and their applications,” Engineering and Structural Materials, vol. 19, No. 1, pp. 802-822, 2018. DOI: https://doi.org/10.1080/14686996.2018.1528478

A. Zhang, B. Hua, and L. li, Breath Figure: A Nature-Inspired Preparation Method for Ordered Porous Films. 2015. DOI: https://doi.org/10.1021/acs.chemrev.5b00069

S. Farah, D. G. Anderson, and R. Langer, “Physical and mechanical properties of PLA, and their functions in widespread applications — A comprehensive review,” Advanced Drug Delivery Reviews, vol. 107, pp. 367-392, 2016/12/15. DOI: https://doi.org/10.1016/j.addr.2016.06.012

J.-M. Raquez, Y. Habibi, M. Murariu, and P. Dubois, “Polylactide (PLA)-based nanocomposites,” Progress in Polymer Science, vol. 38, no. 10, pp. 1504-1542, 2013/10/01. DOI: https://doi.org/10.1016/j.progpolymsci.2013.05.014

R. Auras, B. Harte, and S. Selke, “An Overview of Polylactides as Packaging Materials” Macromol. Biosci, vol. 4, pp. 835–864 2004 DOI: https://doi.org/10.1002/mabi.200400043

Q. Cai, J. Yang, J. Bei, and S. Wang, “A novel porous cells scaffold made of polylactide– dextran blend by combining phase-separation and particle-leaching techniques,” Biomaterials, vol. 23, no. 23, pp. 4483-4492, 2002/12/01. DOI: https://doi.org/10.1016/S0142-9612(02)00168-0

T. Phaechamud and S. Chitrattha, “Pore formation mechanism of porous poly(dl-lactic acid) matrix membrane,” Materials Science and Engineering: C, vol. 61, pp. 744-752, 2016/04/01 DOI: https://doi.org/10.1016/j.msec.2016.01.014

Y. Andou, S. Pattanawihok, V. Jauzein, M. Wakisaka, Y. Shirai, and H. Nishida, “a useful biomass component for simple fabrication of the honeycomb Poly(L-lactide) Film,” Nanobio Bionano 2014.

E. Bormashenko, A. Musin, Y. Bormashenko, G. Whyman, R. Pogreb, and O. Gendelman, “Formation of films on water droplets floating on a polymer solution surface,” Macromolecular Chemistry and Physics, Article vol. 208, no. 7, pp. 702-709, 2007. DOI: https://doi.org/10.1002/macp.200600485

B. Guerrier, C. Bouchard, C. Allain, and C. Bénard, “Drying Kinetics of Polymer Films,” AIChE Journal, Article vol. 44, no. 4, pp. 791- 798, 1998. DOI: https://doi.org/10.1002/aic.690440404

X. Xiong, M. Lin, W. Zou, and X. Liu, “Kinetic control of preparing honeycomb patterned porous film by the method of breath figure,” Reactive and Functional Polymers, vol. 71, no. 9, pp. 964-971, 2011/09/01. DOI: https://doi.org/10.1016/j.reactfunctpolym.2011.06.007

M. Huh, M.‐H. Jung, Y. S. Park, T.‐B. Kang, C. Nah, R. A. Russell, P. J. Holden, and S. I. Yun, “Fabrication of honeycomb-structured porous films from poly(3-hydroxybutyrate) and poly(3-hydroxybutyrate-co-3-hydroxyvalerate) via the breath figures method,” Polymer Engineering & Science, vol. 52, no. 4, pp. 920-926, 2012/04/01 DOI: https://doi.org/10.1002/pen.22161