Debinding behaviour and sintering temperature-dependent features of coloured zirconia fabricated by ceramic injection moulding

Authors

  • Wantanee BUGGAKUPTA Department of Materials Science, Faculty of Science, Chulalongkorn University, Phayathai Road, Bangkok, 10330, Thailand
  • Thanakorn WASANAPIARNPONG Department of Materials Science, Faculty of Science, Chulalongkorn University, Phayathai Road, Bangkok, 10330, Thailand
  • Nutthita CHUANKRERKKUL Metallurgy and Materials Science Research Institute, Chulalongkorn University, Phayathai Road, Bangkok, 10330, Thailand

DOI:

https://doi.org/10.55713/jmmm.v31i2.1056

Keywords:

zirconia, ceramic injection moulding, sintering, binder

Abstract

Zirconia (ZrO2) is one of ceramic materials that has very good mechanical and chemical properties suitable for biomedical applications as well as other industrial applications. ZrO2 ceramics, in fact, has been used in orthodontic dentistry. Nowadays, ZrO2 has been played its role in decorative and jewelry purposes, such as watchcases and artificial stones. Ceramic injection moulding (CIM), a near-net shape manufacturing process that can produce small, complex-shaped components and is suitable for large volume production, is one of the best powder fabrication methods. In this work, CIM was carried out in order to form the coloured-ZrO2 specimens. Binders used in the feedstock preparation are composed mainly of polyethylene glycol (PEG) and polyvinyl butyral (PVB). A laboratory-scaled, plunger-typed injection moulding machine was used to fabricate the coloured-ZrO2 components with various sizes and shapes. Debinding was carried out by water immersion and thermal debinding. Various sintering conditions were also performed. The specimens after sintering were subjected to be characterised and tested. The results showed that the binder removal rates using water related to geometry of the specimens, surface area and volume were taken into account. Sintering temperatures played important roles on properties, microstructure as well as the appearance and shades of the coloured-ZrO2 fabricated by ceramic injection moulding.

Downloads

Download data is not yet available.

References

T. Moritz, “Ceramic injection moulding: Developments in production technology, materials and application,” Powder Injection Moulding International, vol. 14, pp. 55-81, 2020.

M. Zhao, L. Qiao, J. Zheng, Y. Ying, J. Yu, W. Li, and H. Che, “Investigation of solvent debinding in injection moulding of zirconia ceramics using LDPE, HDPE and wax binders,” Ceramic International, vol. 45, pp. 3894-3901, 2017. DOI: https://doi.org/10.1016/j.ceramint.2018.11.062

N. Saelee, N. Chuankrerkkul, and P. Wanakamol, “Microstructure and properties of zirconia-alumina composites fabricated via powder injection molding,” Journal of Metals, Materials, and Minerals, vol. 31, pp. 73-80, 2021.

Y. Gao, K. M. Huang, Z. K. Fan, and Z. P. Xie, “Injection molding of zircona ceramics using water-soluble binder,” Key Engineering Materials, vol. 336-338, pp. 1017-1020, 2007. DOI: https://doi.org/10.4028/www.scientific.net/KEM.336-338.1017

E. V. Dudnik, M. S. Glabay, A. V. Kotko, S. A. Korniy, and I. O. Marek, V. P. Red’Ko, and A.K. Ruban, “Effect of heat treatment on the physiochemical of ultrafine ZrO2-Y2O3-CeO2-Al2O3-CoO powders,” Power Metallurgy and Metal Ceramics, vol. 59, pp. 359-367, 2020. DOI: https://doi.org/10.1007/s11106-020-00169-y

G. De With, and P. N. M. Witbreuk, “Injection moulding of zirconia (Y-TZP) ceramics,” Journal of the European Ceramic Society, vol. 12(5), pp. 343-351, 1993. DOI: https://doi.org/10.1016/0955-2219(93)90003-A

A. P. Surzhikov, T. S Frangulyan, S. A. Ghyngazov, I. P. Vasil’ev, and A. V. Chernyavskii, “Sintering of zirconia ceramics by intense high-energy electron beam,” Ceramics International, vol. 42(12), pp. 13888-13892, 2016. DOI: https://doi.org/10.1016/j.ceramint.2016.05.198

P. Khandelwal, and O. Sumant. (2019, 9 June, 2020). Ceramic Injection Molding Market Forecast by Material and Industry Vertical: Global Opportunity Analysis and Industry Forecast, 2019–2026. Available: https://www.alliedmarketresearch.com/ ceramic-injection- molding-market

S. Weng. (2018, 9 June, 2020). The Overview of Colors Zirconia Ceramics. Available: http://www.zirconiumworld.com/ an-overview- of-colored- zirconia-ceramics/

N. Chuankrerkkul, P. F. Messer, and H. A. Davies, “Application of polyethylene glycol and polymethyl methacrylate as a binder for powder injection moulding of hardmetals,” Chiang Mai Journal of Science, vol. 35, pp. 188-195, 2008.

N. Chuankrerkkul, Y. Boonyongmaneerat, K. Saengkiettiyut, P. Rattanawaleedirojn, and S. Saenapitak, “Injection moulding of tungsten carbide-nickel powders prepared by electroless deposition,” Key Engineering Materials, vol. 545, pp. 148-152, 2013. DOI: https://doi.org/10.4028/www.scientific.net/KEM.545.148

W. Buggakupta, N. Chuankrerkkul, and J. Surawattana, “Effect of water temperature on water-soluble binder removal in ceramic materials fabricated by powder injection moulding,” Key Engineering Materials, vol. 659, pp. 90-93, 2015. DOI: https://doi.org/10.4028/www.scientific.net/KEM.659.90

N. Chomsirikul, O. Khuanthong, P. Sooksaen, and N. Chuankrerkkul, “Influence of specimen dimension and temperature on debinding behavior of alumina feedstock,” Key Engineering Materials, vol. 608, pp. 170-175, 2014. DOI: https://doi.org/10.4028/www.scientific.net/KEM.608.170

N. Chuankrerkkul, W. Buggakupta, and J. Surawattana, “Role of tungsten carbide reinforcement on alumina matrix composites fabricated by powder injection moulding,” Key Engineering Materials, vol. 608, pp. 230-234, 2014. DOI: https://doi.org/10.4028/www.scientific.net/KEM.608.230

P. Luo, J. Zhang, X. Ran, and Y. Lui, “Effects of added aluminum chromium slag on the structure and mechanical properties of colored zirconia ceramics,” International Journal of Applied Ceramic Technology, vol. 17, pp. 2659-2668, 2020. DOI: https://doi.org/10.1111/ijac.13593

C. M. Chang, “Color variation in color-shade polycrystalline zirconia ceramics by the atmosphere controlled firing,” Journal of the Korean Ceramic Society, vol. 55, pp. 116-125, 2018. DOI: https://doi.org/10.4191/kcers.2018.55.2.02

E. Sani, D. Sciti, C. Capiani, and L. Silvestroni, “Colored zirconia with high absorbance and solar selectivity,” Scripta Materialla, vol. 186, pp. 147,151, 2020. DOI: https://doi.org/10.1016/j.scriptamat.2020.04.020

S. Ghyngazov, and S. Shevelev, “Effect of additives on sintering of zirconia ceramics,” Journal of Thermal Analysis and Calorimetry, vol. 134, pp. 134, 2018. DOI: https://doi.org/10.1007/s10973-018-7249-0

Downloads

Published

2021-06-27

How to Cite

[1]
W. BUGGAKUPTA, T. WASANAPIARNPONG, and N. CHUANKRERKKUL, “Debinding behaviour and sintering temperature-dependent features of coloured zirconia fabricated by ceramic injection moulding”, J Met Mater Miner, vol. 31, no. 2, pp. 84–88, Jun. 2021.

Issue

Section

Original Research Articles

Most read articles by the same author(s)