Corrosion behaviour of high phosphorus containing Cu-Cr weather resistance steel
คำสำคัญ:
Tensile properties, Impact energy, Hot ductility, EIS, Impedanceบทคัดย่อ
Three steels viz., G22(Fe-0.072C-0.028 Si-0.20Mn-0.19P-0.38Cr-0.24Cu-0.17Ni), G32(Fe-0.072C-0.061 Si-0.23 Mn-0.19P-0.64Cr-0.14Cu) and SCOR (Fe-0.09C-0.37Si-0.42Mn-0.15P-0.37Cr-0.35Cu-0.31Ni) were made through ingot metallurgy route and hot rolled to 3 mm thick sheets. For other steels, similar corrosion rates were observed from the Tafel extrapolation study of freshly ground samples in 3.5% NaCl solution. Other technique employed to evaluate the effect of phosphorus on the formation of protective rust layer was electrochemical impedance spectroscopy (EIS) test after exposing the samples in an atmospheric exposure rack for four months on the roof top of a fourth floored building. Results revealed that the polarization resistance or rust resistance of G22 and SCOR steels were comparable and similar to that of a reference steel SAILCOR (Fe-0.07C-0.48 Si-0.31Mn-0.118P-0.41Cr-0.32Cu-0.21Ni), which is produced at Bokaro Steel plant. The role of phosphorus in improving atmospheric corrosion resistance was understood from this study.
Downloads
เอกสารอ้างอิง
Biezma, M.V. and Cristobal, J.R. (2005). Methodology to study cost of corrosion. Corros.Eng., Sci. Technol. 40(4): 344-352.
Dong , J.H . , Han, E.H . and Ke, W. (2007).Introduction to atmospheric corrosion research in China. STAM. 8(7-8): 559-565.
Zhang, Q.C., Wu, J.S., Wang, J.J., Zheng, W.L.,Chen, J.G. and Li, A.B. (2003). Corrosion behavior of weathering steel in marine atmosphere. Mater. Chem. Phys. 77(2): 603-608.
Townsend, H. E. (2001). Effects of alloying elements on the corrosion of steel in industrial atmospheres. Corrosion. 57(6): 497-501.
Kamimura, T., Hara, S., Miyuki, H., Yamashita, M. and Uchida, H. (2006). Composition and protective ability of rust layer formed on weathering steel exposed to various environments. Corros. Sci. 48(9): 2799-2812.
Natesan, M., Venkatachari, G. and Palaniswamy, N. (2006). Kinetics of atmospheric corrosion of mild steel, zinc, galvanized iron and aluminium at 10 exposure stations in India. Corros. Sci. 48: 3584-3608.
US-CORTEN STEEL: Catalogue of US Steel (1977).
Misawa, T., Kyuno, Y., Suëtaka, W. a nd Shimodaira, S. (1971). The mechanism of atmospheric rusting and the effect of Cu and P on the rust formation of low alloy steels. Corros. Sci. 11(1): 35-48.
Misawa, T., Asami, K., Hashimoto, K. and Shimodaira, S. (1974). The mechanism of atmospheric rusting and the protective amorphous rust on low alloy steel. Corros. Sci. 14: 279-289.
Zhou, G.P., Liu, Z.Y., Qiu, Y.Q. and Wang, G.D. (2009). The improvement of weathering resistance by increasing P contents in cast strips of low carbon steels. J. Mat. Des. 30(10): 4342-4347.
Yamashita, M., Nagano, H., Misawa, T. and Townsend, H.E. (1998). Structure of protective rust layers formed on weathering steels by long-term exposure in the industrial atmospheres of Japan and North America. ISIJ Int. 38(3): 285-290.
Yamashita, M., Miyukia, H., Matsudaa, Y., Naganoa, H. and Misawa, T. (1994). The long term growth of the protective rust layer formed on weathering steel by atmospheric corrosion during a quarter of a century. Corros. Sci. 36(2): 283-299.
Harbraken, L. and Beckers, J.L. (1982). Hot shortness and scaling of copper containing steel. Copper in Iron and Steel, Edited by I. Le May and L. Mc. Schetky Chap.III. John Wiley and Sons, New York : 45-81.
Ijsseling, F.P. (1986) . Application of Electrochemical Methods of Corrosion Rate Determination to System Involving Corrosion Product Layers. Br. Corros. J. 21(2): 95-101.
Tait, W.S . (1994). AnIntroduction to Electrochemical Corrosion Testing for Practicing Engineers and Scientists. Wisconsin: Pair O' Docs
Hopkins, B.E. and Tipler, H.R. (1958). The effect of phosphorus on the tensile and notch-impact properties of high-purity iron and iron-carbon alloys. J. Iron Steel Inst. 188: 218-237.
Abiko, K., Suzuki, S. and Kimura, H. (1982). Effect of carbon on the toughness and fracture mode of Fe-P alloys. J. Jpn. Inst. Met. 23: 43-52.
Mesquita, R.A. and Kestenbach, H.J. (2011). On the effect of silicon on toughness in recent high quality hot work steels. Mater. Sci. Eng., A. 528(13): 4856-4859.
May, I.L. and Schetky, L.M. (1982). Copper in Iron and Steel. John Wiley and Sons, New York: 45-96.
Flitt, H.J. and Schweinsberg, D.P. (2005). E v a l u a t i o n o f c o r r o s i o n r a t e f r o m polarization curves not exhibiting a Tafel region. Corros. Sci. 47(12): 3034-3052.
Flitt, H.J. and Schweinsberg, D.P. (2005). A guide to polarisation curve interpretation: deconstruction of experimental curves typical of the Fe/H2O/H/+/O2 corrsion system. Corros. Sci. 47(9): 2125-2156.
Pourbaix, M. and Zoubov, N.D. (1974). Establishment and Interpretation of Potential-pH Equilibrium Diagrams. Atlas of Electrochemical Equilibria in Aqueous Solutions, Second English Ed: 307-342.
Sahoo, G. and Balasubramaniam, R. (2008) Corrosion of Phosphoric Irons in Acidic Environments. J. ASTM Int. 5(5): 1-7.
McCafferty, E. (2005). Validation of Corrosion Rates Measured By the Tafel Extrapolation Method. Corros. Sci. 47(12): 3202-3215.
Dexter, S.C. (1979). Handbook of oceanographic engineering materials. John Wiley and Sons: New York.
Hudson, J.C. (1950). Corrosion of bare iron or steel in sea water. J. Iron Steel Inst. 166(2): 123 136.
Dexter, S.C. (1979). Handbook of oceanographic engineering materials. John Wiley and Sons: New York.
McCafferty, E. (2005). Validation of corrosion rates measured by the Tafel extrapolation method. Corros. Sci. 47(12): 3202-3215.
Misawa, T., Kyuno, T., Suetaka, W. and Shimodaira, S. (1971). The mechanism of atmospheric rusting and the effect of Cu and P on the rust formation of low alloy steels. Corros. Sci. 11(1): 35-48.
Misawa, T., Asami, K., Hashimoto, K. and Shimodaira, S. (1974). The mechanism of atmospheric rusting and the protective amorphous rust on low alloy steel. Corros. Sci. 14(4): 279-289.
Baboian, R. and Dean, S.W. (1990). Corrosion testing and evaluation : silver anniversary volume. Philadelphia, PA: ASTM.
Quaraishi, M.A., Rawat, J. and Ajmal, M. (2000). Dithiobiurets: a novel class of acid corrosion inhibitors for mild steel. J. Appl. Electrochem. 30(6): 745-751.
Sahoo, G., Fujieda, S., Shinoda, K. and Suzuki, S. (2011). Influence of phosphate species on green rust I transformation and local structure and morphology of γ-FeOOH. Corros. Sci. 53(8): 2446-2452.
ดาวน์โหลด
เผยแพร่แล้ว
วิธีการอ้างอิง
ฉบับ
บท
การอนุญาต
ลิขสิทธิ์ (c) 2014 วารสารโลหะ, วัสดุ และแร่
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Authors who publish in this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
