Influence of precursor preparation on the synthesis of boron carbide from glutinous rice flour

Authors

  • Kannigar Dateraksa Department of Materials Science, Faculty of Science, Chulalongkorn University
  • Sujarinee Sinchai Department of Materials Science, Faculty of Science, Chulalongkorn University

DOI:

https://doi.org/10.55713/jmmm.v31i3.1165

Keywords:

Boron carbide, Boric acid, Glutinous rice flour, Synthesis, Carbothermic reduction

Abstract

Boron carbide is a promising candidate for a variety of applications, including blasting nozzles, neutron moderators, and lightweight armor. Using of inexpensive and readily available starting materials which can react with boric acid to form B-O-C bonds, e.g., glutinous rice flour, is one of alternative means to produce high purity boron carbide powder at low temperature. In this study, boric acid and glutinous rice flour, boron and carbon sources, were used for synthesizing B4C powder by the carbothermic reduction. The mole ratios of boric acid to glutinous rice flour ranging from 1:1 to 2.5:1 were formulated and mixed by continuous stirring at 80℃ for 2 h to 8 h. The influence of reaction time during the mixing process on the phase formation of the synthesized powder was investigated. It was found that appropriate reaction time for condensation of 4 h facilitated the B4C phase formation during synthesis. The precursors were synthesized under Ar flow at 1350℃ to 1450℃ for 5 h without calcination. B4C powder with the purity of 90 wt% was successfully synthesized from this study. Chemical bonding, phase analysis, and morphology of the synthesized powder were identified by Fourier-transform infrared spectroscopy, X-ray diffraction, and scanning electron microscope, respectively. The influences of starting composition and synthesis temperature on the characteristics of the synthesized powders were also discussed. 

Downloads

Download data is not yet available.

References

F. Thevenot, “Boron carbide-a comprehensive review,” Journal of the European Ceramic society, vol. 64, pp. 205-225, 1990.

A.K. Suri, C. Subramanian, J.K. Sonber, and T.C. Murthy, “Synthesis and consolidation of boron carbide: a review,” International Materials Reviews, vol. 55, pp. 4-40, 2010.

N. Shawgi, S. Li, and S. Wang, “A novel method of synthesis of high purity nano plated boron carbide powder by a solid-state reaction of poly (vinyl alcohol) and boric acid,” Ceramics International, vol. 43, pp. 10554-10558, 2017.

A. Sinha, T. Mahata, and B.P. Sharma, “Carbothermal route for preparation of boron carbide powder from boric acid–citric acid gel precursor,” Journal of Nuclear Materials, vol. 301, pp. 165-169, 2002.

M. Kakiage, N. Tahara, I. Yanase, and H. Kobayashi, “Low-temperature synthesis of boron carbide powder from condensed boric acid–glycerin product,” Materials letters, vol. 65, pp. 1839-1841, 2011.

S.K. Vijay, R. Krishnaprabhu, V. Chandramouli, and S. Anthonysamy, “Synthesis of nanocrystalline boron carbide by sucrose precursor method-optimization of process conditions,” Ceramics International, vol. 44, pp. 4676-4684, 2018.

M. Maqbool, G. H. Zahid, E. Ahmad, Z. Asghar, T. Subhani, M. Shahzad, and I. Kaleem, “Effect of saccharides as carbon source on the synthesis and morphology of B4C fine particles from carbothermal synthesis precursors,” Materials Express, vol. 5, pp. 390-400, 2015.

M. Kakiage, “Low-temperature synthesis of boride powders by controlling microstructure in precursor using organic compounds,” Journal of the Ceramic Society of Japan, vol. 126, pp. 602-608, 2018.

M. Kakiage, Y. Tominaga, I. Yanase, and H. Kobayashi, “Synthesis of boron carbide powder in relation to composition and structural homogeneity of precursor using condensed boric acid–polyol product,” Powder technology, vol. 221, pp. 257-263, 2012.

A.K. Khanra, “Production of boron carbide powder by carbothermal synthesis of gel material,” Bulletin of Materials Science, vol. 30, pp. 93-96, 2007.

T.R. Pilladi, K. Ananthansivan, and S. Anthonysamy, “Synthesis of boron carbide from boric oxide-sucrose gel precursor,” Powder technology, vol. 246, pp. 247-251, 2013.

G.H. Zahid, E. Ahmad, M. Maqbool, T. Subhani, W.A. Syed, and S.Z. Hussain, “Effect of cellulose-derived structural homogeneity of precursor on the synthesis and morphology of boron carbide,” Journal of Inorganic and Organometallic Polymers and Materials, vol. 25, pp. 995-999, 2015.

S. Avcioglu, F. Kaya, and C. Kaya, “Non-catalytic synthesis of boron carbide (B4C) nano structures with various morphologies by sol-gel process,” Materials Letters, vol. 249, pp. 201-205, 2019.

D. Kozień, P. Jeleń, M. Sitarz, and M. M Bućko, “Synthesis of boron carbide powders from mono-and polysaccharides,” International Journal of Refractory Metals and Hard Materials, vol. 86, pp. 105099, 2020.

Y.M. Ahmed, S.M. El-Sheikh, E.M. Ewais, A. Abd-Allah, and S.A. Sayed, “Controlling the morphology and oxidation resistance of boron carbide synthesized via carbothermic reduction reaction,” Journal of Materials Engineering and Performance, vol. 26, pp. 1444-1454, 2017.

Rafi-ud-din, G.H. Zahid, Z. Asghar, M. Maqbool, E. Ahmad, T. Azhar, and M. Shahzad, “Ethylene glycol assisted low-temperature synthesis of boron carbide powder from borate citrate precursors,” Journal of Asian Ceramic Societies, vol. 2, pp. 268-274, 2014.

R.V. Gadhave, P.S. Kasbe, P.A. Mahanwar, and P.T. Gadekar., “To study the effect of boric acid modification on starch–polyvinyl alcohol blend wood adhesive,” Journal of the Indian Academy of Wood Science, vol. 15, pp. 190-198, 2018.

R.V. Gadhave, P.A. Mahanwar, and P.T. Gadekar, “Study of Cross-Linking between Boric Acid and Different Types of Polyvinyl Alcohol Adhesive,” Open Journal of Polymer Chemistry, vol. 9, pp. 16, 2019.

T.S. Hansen, J. Mielby, and A. Riisager, “Synergy of boric acid and added salts in the catalytic dehydration of hexoses to 5-hydroxymethylfurfural in water,” Green chemistry, vol. 13, pp. 109-114, 2011.

N. Tahara, M. Kakiage, I. Yanase, and H. Kobayashi, “Effect of addition of tartaric acid on synthesis of boron carbide powder from condensed boric acid–glycerin product,” Journal of alloys and compounds, vol. 573, pp. 58-64, 2013.

B. Wade, N. Venkatasubramanian, P. Desai, A.S. Abhiraman, E.C. Ashby, and L.T. Gelbaum, “Synthesis and characterization of processable polyborate precursors,” Journal of Sol-Gel Science and Technology, vol. 5, pp. 15-25, 1995.

K. Dateraksa, and S. Sinchai, “Phase formation of boron carbide powder synthesized from glutinous rice flour,” Journal of Metals, Materials and Minerals, vol. 29, pp. 48-53, 2019.

R. Kizil, J. Irudayaraj, and K. Seetharaman, “Characterization of irradiated starches by using FT-Raman and FTIR spectroscopy,” Journal of agricultural and food chemistry, vol. 50, pp. 3912-3918, 2002.

Downloads

Published

2021-09-28

How to Cite

[1]
K. Dateraksa and S. . Sinchai, “Influence of precursor preparation on the synthesis of boron carbide from glutinous rice flour ”, J Met Mater Miner, vol. 31, no. 3, pp. 39–46, Sep. 2021.

Issue

Section

Original Research Articles