ปีที่ 21 ฉบับที่ 1 (2011)

Original Research Articles

• Chevron crack initiation in mullti-pass drawing of inclusion copper shaped-wire

  Somchai Norasethasopon

  • PDF (English)

• Self-crack closing ability of mortar with different additives

  Dechkhachorn Jaroenratanapirom, Raktipong Sahamitmongkol

  • PDF (English)

• Determination of forming limit stress diagram for formability prediction of SPCE 270 steel sheet

  Sansot Panich, Vitoon Uthaisangsuk, Jittichai Juntaratin, Surasak Suranuntchai

  • PDF (English)

• The change of surface alloy compositions and corrosion behavior after WEDM machining of commercially pure titanium (grade 4) and Ti-6Al-4V (grade 5)

  Kittikoon Sriprasertying, Soranat Rhaiphu

  • PDF (English)

• Modification of montmorillonite with a cationic softener for finishing cotton fabric with hand builder performance

  Siriwan Kittinaovarat, Nantana Jiratumnukul, Narissara Koolpreechanan

  • PDF (English)

• Chitosan and trimethyl chitosan particles as oral vaccine delivery systems: Comparison of the potential to initiate immune responses

  Supavadee Boontha, Hans E. Unginger, Neti Waranuch, Assadang Polnok, Tasana Pitaksuteepong

  • PDF (English)

• Purification of an industrial aluminum alloy by melt stirring during Ohno Continuous Casting process

  Simbarashe Fashu, Li Jianguo, Hu Qiao Dan

  • PDF (English)

• Corrosion prevention of rebar in concrete due to chloride

  Yuttana Srimahajariyaphong, Satian Niltawach

  • PDF (English)

• Improving quench hardening of low carbon steel

  Thanaporn Korad, Mana Polboon, Niphon Chumchery, John Pearce

  • PDF (English)

• Design and construction of water atomizer for making metal powder

  Suchart Yenwiset, Tawichart Yenwiset

  • PDF (English)

• Development of composition modulated multilayer alloy coatings and their corrosion behavior

  Subbaiah Yogesha, Ampar Chitharanjan Hegde

  • PDF (English)

• Effect of postweld heat treatment on microstructures and hardness of TIG weldment between P22 and P91 steels with Inconel 625 filler metal

  Nattaphon Tammasophon, Weerasak Homhrajai, Gobboon Lothongkum

  • PDF (English)

• Applying computer simulation in improving heat treating condition of thin high-carbon steel parts

  Thanaporn Korad, Mana Polboon, Niphon Chumchery, John Pearce

  • PDF (English)

• Separation of lycopene/solvent mixture by chitosan membranes

  Pram Yodjun, Khantong Soontarapa, Chutima Eamchotchawalit

  • PDF (English)

• Effect of nitrogen partial pressure on characteristic and mechanical properties of hard coating TiAlN Film

  Chaiwat Chokwatvikul, Siriporn Larpkiattaworn, Surasak Surinphong, Chumphol Busabok, Preecha Termsuksawad

  • PDF (English)

• Study conditions of aluminum billets for relationship between precipitated phases and homogenizing temperature with different cooling methods

  Umarin Phongsophitanan, Mana Polboon, Niphon Chumchery

  • PDF (English)

• Immobilization of lipase onto Cyperus Papyrus L. for biodiesel production by transesterification and hydrolysis-esterification

  Sireerat Charuchinda, Piyanan Suthianthong, Warawut Chulalaksananukul

  • PDF (English)