Photoelectrochemical cathodic protection of amorphous zinc oxide coating on hot rolled steel SS400 in a 3 wt% NaCl solution and a Na2S-NaOH solution

ผู้แต่ง

  • Phatchara Wipataphan Department of Materials Engineering, Faculty of Engineering, Kasetsart University, 50 Ngamwongwan Rd, Chatuchak, 10900, Bangkok, Thailand.
  • Worapot Sripianem Department of Materials Engineering, Faculty of Engineering, Kasetsart University, 50 Ngamwongwan Rd, Chatuchak, 10900, Bangkok, Thailand.
  • Naw Blessing Oo Department of Materials Engineering, Faculty of Engineering, Kasetsart University, 50 Ngamwongwan Rd, Chatuchak, 10900, Bangkok, Thailand; International Collaborative Education Program for Materials Technology, Education, and Research (ICE-Matter), ASEAN University Network/Southeast Asia Engineering Education Development Network (AUN/SEED-Net), Faculty of Engineering, Kasetsart University, 50 Ngamwongwan Rd, Chatuchak, 10900, Bangkok, Thailand.
  • Thanate Na Wichean Department of Materials Engineering, Faculty of Engineering, Kasetsart University, 50 Ngamwongwan Rd, Chatuchak, 10900, Bangkok, Thailand; Materials Innovation Center, Faculty of Engineering, Kasetsart University, Bangkok 10900, Thailand
  • Boossayamas DACHBUMROONG Department of Materials Engineering, Faculty of Engineering, Kasetsart University, 50 Ngamwongwan Rd, Chatuchak, 10900, Bangkok, Thailand; Materials Innovation Center, Faculty of Engineering, Kasetsart University, Bangkok 10900, Thailand
  • Oratai Jongprateep Department of Materials Engineering, Faculty of Engineering, Kasetsart University, 50 Ngamwongwan Rd, Chatuchak, 10900, Bangkok, Thailand; International Collaborative Education Program for Materials Technology, Education, and Research (ICE-Matter), ASEAN University Network/Southeast Asia Engineering Education Development Network (AUN/SEED-Net), Faculty of Engineering, Kasetsart University, 50 Ngamwongwan Rd, Chatuchak, 10900, Bangkok, Thailand.
  • Gasidit Panomsuwan Department of Materials Engineering, Faculty of Engineering, Kasetsart University, 50 Ngamwongwan Rd, Chatuchak, 10900, Bangkok, Thailand; International Collaborative Education Program for Materials Technology, Education, and Research (ICE-Matter), ASEAN University Network/Southeast Asia Engineering Education Development Network (AUN/SEED-Net), Faculty of Engineering, Kasetsart University, 50 Ngamwongwan Rd, Chatuchak, 10900, Bangkok, Thailand.
  • Naray Pewnim Department of Materials Engineering, Faculty of Engineering, Kasetsart University, 50 Ngamwongwan Rd, Chatuchak, 10900, Bangkok, Thailand; International Collaborative Education Program for Materials Technology, Education, and Research (ICE-Matter), ASEAN University Network/Southeast Asia Engineering Education Development Network (AUN/SEED-Net), Faculty of Engineering, Kasetsart University, 50 Ngamwongwan Rd, Chatuchak, 10900, Bangkok, Thailand.
  • Ratchatee Techapiesancharoenkij Department of Materials Engineering, Faculty of Engineering, Kasetsart University, 50 Ngamwongwan Rd, Chatuchak, 10900, Bangkok, Thailand; International Collaborative Education Program for Materials Technology, Education, and Research (ICE-Matter), ASEAN University Network/Southeast Asia Engineering Education Development Network (AUN/SEED-Net), Faculty of Engineering, Kasetsart University, 50 Ngamwongwan Rd, Chatuchak, 10900, Bangkok, Thailand; Materials Innovation Center, Faculty of Engineering, Kasetsart University, Bangkok 10900, Thailand

คำสำคัญ:

Photocathodic protection, Corrosion, Hole scavenger, Thin film, Zinc oxide

บทคัดย่อ

                The photoelectrochemical cathodic protection of amorphous ZnO thin-film coating on hot rolled steel SS400, in the 3 wt% NaCl environment, was investigated. The ZnO thin film was coated on a SS400 substrate at 200℃ using the spray pyrolysis technique. The x-ray diffractometry analysis confirmed the amorphous ZnO coatings. Two different types of the electrochemical cells were used: a single-cell and a double-cell system. Two different types of the photoelectrolytic solutions were compared: (i) 0.1 M Na2S + 0.2 M NaOH and (ii) 3 wt% NaCl solution. The ZnO-coated SS400 samples were subjected to potentiostatic polarization testing under dark and UV conditions, with the immersion of either Na2S-NaOH or NaCl solution. The photoelectrochemical analysis showed that the photocathodic protection on SS400 by the ZnO coating could be demonstrated with the photoelectrolytic solution of Na2S-NaOH. The voltage was negatively shifted and the current density was increased with the UV irradiation on the ZnO coating, immersing in the Na2S-present solution. The ZnO coating was also stable in the Na2S-NaOH solution. The microstructural analyses with Optical Microscope and Scanning Electron Microscope were conducted to support the photoelecrochemical analyses.

Downloads

Download data is not yet available.

เอกสารอ้างอิง

B. Hou, X. Li, X. Ma, C. Du, D. Zhang, M. Zheng, W. Xu, D. Lu, and F. Ma, “The cost of corrosion in China,” npj Materials Degradation, vol. 1, pp. 1-10, 2017.

Y. Bu, and J.-P. Ao, “A review on photoelectrochemical cathodic protection semiconductor thin films for metals,” Green Energy & Environment, vol. 2, pp. 331-362, 2017.

B. A. Shaw, and R. G. Kelly, “What is corrosion?” Electrochemical Society Interface, vol. 15, pp. 24-26, 2006.

Z. C. Petrović, “Catastrophes caused by corrosion,” Military Technical Courier, vol. 64, pp. 1048-1064, 2016.

X. Wei, C. Zhang, and X. Ling, “Effects of laser shock processing on corrosion resistance of AISI 304 stainless steel in acid chloride solution,” Journal of Alloys and Compounds, vol. 723, pp. 237-242, 2017.

O. M. Alyousif, and R. Nishimura, “The stress corrosion cracking behavior of austenitic stainless steels in boiling magnesium chloride solutions,” Corrosion Science, vol. 49, pp. 3040-3051, 2007.

O. M. Alyousif, and R. Nishimura, “On the stress corrosion cracking and hydrogen embrittlement of sensitized austenitic stainless steels in boiling saturated magnesium chloride solutions: Effect of applied stress,” Corrosion Science, vol. 50, pp. 2919-2926, 2008.

D. Dwivedi, K. Lepková, and T. Becker, “Carbon steel corrosion: a review of key surface properties and characterization methods,” RSC Advances, vol. 7, pp. 4580-4610, 2017.

J. Hu, Z. C. Guan, Y. Liang, J. Z. Zhou, Q. Liu, H. P. Wang, H. Zhang, and R. G. Du, “Bi2S3 modified single crystalline rutile TiO2 nanorod array films for photoelectrochemical cathodic protection,” Corrosion Science, vol. 125, pp. 59-67, 2017.

Z. C. Guan, X. Wang, P. Jin, Y. Y. Tang, H. P. Wang, G. L. Song, and R. G. Du, “Enhanced photoelectrochemical performances of ZnS-Bi2 S3 /TiO2 /WO3 composite film for photocathodic protection,” Corrosion Science, vol. 143, pp. 31-38, 2018.

W. X. Sun, S. W. Cui, N. Wei, S. G. Chen, Y. P. Liu, and D. A. Wang, “Hierarchical WO3/TiO2 nanotube nanocomposites for efficient photocathodic protection of 304 stainless steel under visible light,” Journal of Alloys and Compounds, vol. 749, pp. 741-749, 2018.

H. Li, X. Wang, L. Zhang, and B. Hou, “Preparation and photo-cathodic protection performance of CdSe/reduced graphene oxide/TiO2 composite,” Corrosion Science, vol. 94, pp. 342-349, 2015.

C. X. Lei, Z. D. Feng, and H. Zhou, “Visible-light-driven photo-generated cathodic protection of stainless steel by liquid-phase-deposited TiO2 films,” Electrochimica Acta, vol. 68, pp. 134-140, 2012.

N. Barati, M. A. F. Sani, and H. Ghasemi, “Photocathodic protection of 316L stainless steel by coating of anatase nano-particles,” Protection of Metals and Physical Chemistry of Surfaces, vol. 49, pp. 109-112, 2013.

M. K. Sahnesarayi, H. Sarpoolaky, and S. Rastegari, “Effect of heat treatment temperature on the performance of nano-TiO2 coating in protecting 316L stainless steel against corrosion under UV illumination and dark conditions,” Surface and Coatings Technology, vol. 258, pp. 861-870, 2014.

H. Deng, M. C. Huang, W. H. Weng, and J. C. Lin, “Photo-cathodic protection of iron oxide nanotube arrays fabricated on carbon steel,” Surface and Coatings Technology, vol. 266, pp. 183-187, 2015.

S. S. Ge, Q. X. Zhang, X. T. Wang, H. Li, L. Zhang, and Q. Y. Wei, “Photocathodic protection of 304 stainless steel by

MnS/TiO2 nanotube films under simulated solar light,” Surface and Coatings Technology, vol. 283, pp. 172-176, 2015.

J. Hu, Y. F. Zhu, Q. Liu, Y. B. Gao, R. G. Du, C. J. Lin, and SnO2, “Nanoparticle films prepared by pulse current deposition for photocathodic protection of stainless steel,” Journal of The Electrochemical Society, vol. 162, pp. 161-166, 2015.

S. Cui, X. Yin, Q. Yu, Y. Liu, D. Wang, and F. Zhou, “Poly-pyrrole nanowire/TiO2 nanotube nanocomposites as photoanodes for photocathodic protection of Ti substrate and 304 stainless steel under visible light,” Corrosion Science, vol. 98, pp. 471-477, 2015.

J. Zhang, J. Hu, Y. F. Zhu, Q. Liu, H. Zhang, R. G. Du, and C. J. Lin, “Fabrication of CdTe/ZnS core/shell quantum dots sensitized TiO2 nanotube films for photocathodic protection of stainless steel,” Corrosion Science, vol. 99, pp. 118-124, 2015.

S. O. Moussa, and M. G. Hocking, “The photo-inhibition of localized corrosion of 304 stainless steel in sodium chloride environment,” Corrosion Science, vol. 43, pp. 2037-2047, 2001.

Y. Ohko, S. Saitoh, T. Tatsuma, and A. Fujishima, “Photoelectro- chemical anticorrosion and self-cleaning effects of a TiO2 coating for type 304 stainless steel,” Journal of The Electrochemical Society, vol. 148, pp. B24-B28, 2001.

J. M. Bastidas, and J. D. Scantlebury, “The influence of light on corrosion phenomena: the behaviour of mild steel in citric acid solution,” Corrosion Science, vol.26, pp.341-347, 1986.

Y. Ohko, S. Saitoh, T. Tatsuma, and A. Fujishima, “Photoelectro-chemical Anticorrosion Effect of SrTiO3 for Carbon Steel,” Electrochemical and Solid-State Letters, vol. 5, pp. B9-B12, 2002.

J. Yuan, and S. Tsujikawa, “Characterization of sol-gel-derived TiO2 coatings and their photoeffects on copper substrates,” Journal of The Electrochemical Society, vol. 142, pp. 3444-3450, 1995.

I. E. Paulauskas, J. E. Katz, G. E. Jellison Jr., N. S. Lewis, and L. A. Boatner, “Photoelectrochemical studies of semiconducting photoanodes for hydrogen production via water dissociation,” Thin Solid Films, vol. 516, pp. 8175-8178, 2008.

J. Mayne, “Paints for the protection of steel−A Review of research into their action,” British Corrosion Journal, vol. 5, pp. 160, 1970.

S. Li, and J. Fu, “Improvement in corrosion protection properties of TiO2 coatings by chromium doping,” Corrosion Science, vol. 68, pp. 101-110, 2013.

M. J. Zhou, N. Zhang, L. Zhang, and J. H. Yan, “Photocathodic protection properties of TiO2 -V2O5 composite coatings,” Materials and Corrosion, vol. 64, pp. 996-1000, 2013.

M. Li, S. Luo, P. Wu, and J. Shen, “Photocathodic protection effect of TiO2 films for carbon steel in 3% NaCl solutions,” Electrochimica Acta, vol. 50, pp. 3401-3406, 2005.

H. Li, X. Wang, Y. Liu, and B. Hou, “Ag and SnO2 co-sensitized TiO2 photoanodes for protection of 304SS under visible light,” Corrosion Science, vol 82, pp. 145-153, 2014.

H. Xu, W. Liu, L. Cao, G. Su, and R. Duan, “Preparation of porous TiO2/ZnO composite film and its photocathodic protection properties for 304 stainless steel,” Applied Surface Science, vol. 301, pp. 508-514, 2014.

T. Imokawa, R. Fujisawa, A. Suda, and S. Tsujikawa, “Protection of 304 Stainless steel with TiO2 coating,” Zairyo-to-Kankyo, vol. 43, pp. 482-486, 1994.

R. Subasri, S. Deshpande, S. Seal, and T. Shinohara, “Evaluation of the Performance of TiO2–CeO2 Bilayer Coatings as Photoanodes for Corrosion Protection of Copper,” Electrochemical and Solid-State Leters, vol. 9, pp. B1-B4, 2006.

Y. F. Zhu, L. Xu, J. Hu, J. Zhang, R. G. Du, and C. J. Lin, “Fabrication of heterostructured SrTiO3/TiO2 nanotube array films and their use in photocathodic protection of stainless steel,” Electrochimica Acta, vol. 121, pp. 361-368, 2014.

J. Hu, Q. Liu, H. Zhang, C. D. Chen, Y. Liang, R. G. Du, and C. J. Lin, “Facile ultrasonic deposition of SnO2 nanoparticles on TiO2 nanotube films for enhanced photoelectrochemical performances,” Journal of Materials Chemistry A, vol. 3, pp. 22605-22613, 2015.

J. Lei, Q. Shao, X. Wang, Q. Wei, L. Yang, H. Li, Y. Huang, and B. Hou, “ZnFe2O4/TiO2 nanocomposite films for photo-cathodic protection of 304 stainless steel under visible light,” Materials Research Bulletin, vol. 95, pp. 253-260, 2017.

J. Cui, and Y. S. Pei, “Enhanced photocathodic protection performance of Fe2O3/TiO2 heterojunction for carbon steel under simulated solar light,” Journal of Alloys and Compounds, vol. 779, pp. 183-192, 2019.

H. Li, Y. H. Li, M. Wang, Z. Niu, X. T. Wang, and B. R. Hou, “Preparation and photocathodic protection property of ZnIn2S4/ RGO/TiO2 composites for Q235 carbon steel under visible light,” Nanotechnology, vol. 29, p. 435706, 2018.

H. Park, K. Y. Kim, and W. Choi, “Photoelectrochemical approach for metal corrosion prevention using a semiconductor photoanode,” The Journal of Physical Chemistry B, vol. 106, pp. 4775-4781, 2002.

M. Sun, Z. Chen, Y. Bu, J. Yu, and B. Hou, “Effect of ZnO on the corrosion of zinc, Q235 carbon steel and 304 stainless steel under white light illumination,” Corrosion Science, vol. 82, pp. 77-84, 2014.

S. Y. Arman, H. Omidvar, S. H. Tabaian, M. Sajjadnejad, S. Fouladvand, and S. Afshar, “Evaluation of nanostructured S-doped TiO2 thin films and their photoelectrochemical application as photoanode for corrosion protection of 304 stainless steel,” Surface and Coatings Technology, vol. 251, pp. 162-169, 2014.

J. Li, C. J. Lin, J. T. Li, Z. and Q. Lin, “A photoelectron-chemical study of CdS modified TiO2 nanotube arrays as photo-anodes for cathodic protection of stainless steel,” Thin Solid Films, vol. 519, pp. 5494-5502, 2011.

L. Xu, Y. F. Zhu, J. Hu, J. Zhang, Y. Z. Shao, R. G. Du, and C. J. Lin, “TiO2 nanotube films prepared by anodization in glycerol solutions for photocathodic protection of stainless steel,” Journal of The Electrochemical Society, vol. 161, pp. 231-235, 2014.

G. X. Shen, Y. C. Chen, and C. J. Lin, “Corrosion protection of 316 L stainless steel by a TiO2 nanoparticle coating prepared by sol–gel method,” Thin Solid Films, vol. 489, pp. 130-136, 2005.

G. X. Shen, Y. C. Chen, L. Lin, and C. J. Lin, “Study on a hydrophobic nano-TiO2 coating and its properties for corrosion protection of metals,” Electrochim. Acta, vol. 50, pp. 5083-5089, 2005.

R. Subasri, and T. Shimohara, “The applicability of SnO2

coatings for corrosion protection of metals,” Electrochemical Solid-State Letter, vol. 7, pp. B17-B20, 2004.

R. Techapiesancharoenkij, W. Sripianem, K. Tongpul, C.

Peamjharean, T. N. Wichean, T. Meesak, and P. Eiamchai, “Investigation of the photocathodic protection of a transparent ZnO coating on an AISI type 304 stainless steel in a 3% NaCl solution,” Surface and Coatings Technology, vol. 320, pp. 97-102, 2017.

A. Paracchino, V. Laporte, K. Sivula, M. Grätzel, and E. Thimsen, “Highly active oxide photocathode for photoelectrochemical water reduction,” Nature Materials, vol. 10, pp. 456-461, 2011.

Y. Yang, and Y. F. Cheng, “Factors affecting the performance and applicability of Sr-TiO3 photoelectrodes for photoinduced cathodic protection,” Journal of The Electrochemical Society, vol. 164, pp. C1067-C1075, 2017.

Y. Yang, and Y. F. Cheng, “One-step facile preparation of ZnO nanorods as high-performance photoanodes for photo-electronchemical cathodic protection,” Electrochimica Acta, vol. 276, pp. 311-318, 2018.

S. Bee, A. Hamid, S. J. Teh, and C. W. Lai, “Photocatalytic water oxidation on ZnO: A Review,” Catalysts, vol. 7, pp. 93-107, 2017.

Y. Liang, Z. C. Guan, H. P. Wang, and R. G. Du, “Enhanced photoelectrochemical anticorrosion performance of WO3/TiO2 nanotube composite films formed by anodization and electro-deposition,” Electrochemistry Communications, vol. 77, pp. 120-123, 2017.

K. L. Nardi, N. Yang, C. F. Dickens, A. L. Strickler, and S. F. Bent, “Creating highly active atomic layer deposited NiO electrocatalysts for the oxygen evolution reaction,” Advanced Energy Materials, vol. 5, p. 1500412, 2015.

M. Sun, Z. Chen, and J. Yu, “Highly efficient visible light induced photoelectrochemical anticorrosion for 304SS by Ni-doped TiO2,” Electrochimica Acta, vol. 109, pp. 13-19, 2013.

J. D. Merchant, and M. Cocivera, “Preparation and doping of zinc oxide using spray pyrolysis,” Chemistry of Materials, vol. 7, pp. 1742-1749, 1995.

S. A. Studenikin, N. Golego, and M. Cocivera, “Optical and electrical properties of undoped ZnO films grown by spray pyrolysis of zinc nitrate solution,” Journal of Applied Physics, vol. 83, pp. 2104-2111, 1998.

Y. Liu, Z. Zhu, and Y. Cheng, “An in-depth study of photo-cathodic protection of SS304 steel by electrodeposited layers of ZnO nanoparticles,” Surface and Coatings Technology, vol. 399, p. 126158, 2020.

W. Sripianem, and R. Techapiesancharoenkij, “Effect of Al and Ga codoping on the morphological, electronic, and optical properties of ZnO transparent conductive thin films prepared by spray pyrolysis technique,” Turkish Journal of Physics, vol. 42, pp. 688-698, 2018.

D. Xu, M. Yang, Y. Liu, R. Zhu, X. Lv, C. Zhang, and B. Liu, “Fabrication of an innovative designed TiO2 nanosheets/CdSe/ polyaniline/graphene quaternary composite and its application as in situ photocathodic protection coatings on 304SS,” Journal of Alloys and Compounds, vol. 822, p. 153685, 2020.

Y. Liu, Z. Zhu, Y. Cheng, B. Wei, and Y. L. Cheng, “Effect of electrodeposition temperature on the thin films of ZnO nano-particles used for photocathodic protection of SS304,” Journal of Electroanalytical Chemistry, vol. 881, p. 114945, 2021.

L. Hao, Y. Sirong, and H. Xiangxiang, “Preparation of a biomimetic superhydrophobic ZnO coating on an X90 pipeline steel surface,” New Journal of Chemistry, vol. 39, pp. 4860-4868, 2015.

D. Lv, F. H. Shao, X. Gao, K. Lu, H. Lu, and H. Ma,

“Fabrication and corrosion resistance properties of super-

hydrophobic coatings on iron and steel substrates by creating micro-/nano-structure and modifying rough surfaces,” RSC Advances, vol. 6, pp. 93419-93427, 2016.

Y. Yang, Y.F. Cheng, “Bi-Layered CeO2/SrTiO3 nanocomposite photoelectrode for energy storage and photocathodic protection,” Electrochimica Acta, vol 253, pp. 134-141, 2017.

ดาวน์โหลด

เผยแพร่แล้ว

2021-12-16

วิธีการอ้างอิง

[1]
P. Wipataphan, “Photoelectrochemical cathodic protection of amorphous zinc oxide coating on hot rolled steel SS400 in a 3 wt% NaCl solution and a Na2S-NaOH solution”, J Met Mater Miner, ปี 31, ฉบับที่ 4, น. 129–142, ธ.ค. 2021.

ฉบับ

ปีที่ 31 ฉบับที่ 4 (2021)

บท

Original Research Articles

การอนุญาต

ลิขสิทธิ์ (c) 2021 Journal of Metals, Materials and Minerals

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Authors who publish in this journal agree to the following terms:

    1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.

 

    1. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.

Most read articles by the same author(s)