Raman Signal Enhancement of Low-Cost Metal Sheet SERS with Gold Decoration

Authors

  • NAMPUENG PANGPAIBOON Department of Industrial Physics and Medical Instrumentation, Faculty of Applied Science, King Mongkut's University of Technology North Bangkok, Bangkok, 10800, Thailand
  • KAWINPHOB PHETNAM Department of Industrial Physics and Medical Instrumentation, Faculty of Applied Science, King Mongkut's University of Technology North Bangkok, Bangkok, 10800, Thailand
  • SUKON KALASUNG Opto-Electrochemical Sensing Research Team, Spectroscopic and Sensing Devices Research Group, National Electronics and Computer Technology Center, Pathum Thani, 12120, Thailand
  • CHANUNTHORN CHANANONAWATHORN Opto-Electrochemical Sensing Research Team, Spectroscopic and Sensing Devices Research Group, National Electronics and Computer Technology Center, Pathum Thani, 12120, Thailand
  • VIYAPOL PATTHANASETTAKUL Opto-Electrochemical Sensing Research Team, Spectroscopic and Sensing Devices Research Group, National Electronics and Computer Technology Center, Pathum Thani, 12120, Thailand
  • MATI HORPRATHUM Opto-Electrochemical Sensing Research Team, Spectroscopic and Sensing Devices Research Group, National Electronics and Computer Technology Center, Pathum Thani, 12120, Thailand
  • PITAK EIAMCHAI Opto-Electrochemical Sensing Research Team, Spectroscopic and Sensing Devices Research Group, National Electronics and Computer Technology Center, Pathum Thani, 12120, Thailand
  • NOPPADON NUNTAWONG Opto-Electrochemical Sensing Research Team, Spectroscopic and Sensing Devices Research Group, National Electronics and Computer Technology Center, Pathum Thani, 12120, Thailand
  • SAKSORN LIMWICHEAN Opto-Electrochemical Sensing Research Team, Spectroscopic and Sensing Devices Research Group, National Electronics and Computer Technology Center, Pathum Thani, 12120, Thailand

Keywords:

Laser-engraved, Sputtering, Zinc SERS, Copper SERS, Low-cost SERS

Abstract

Surface Enhance Raman Spectroscopy (SERS) is a sensitive surface creating plasmonic resonance for the Raman scattering. SERS is considered as a powerful technique to enhance the Raman signal, when quantity of sample is limited. Recently, our lab team has discovered a low-cost SERS template fabrication, laser-engraving method, which is suitable with gold nanoparticles decoration. In this work, two different materials, zinc and copper, are used as metal sheet SERS substrate. Gold nanoparticles sputtered with 270 s of sputtering time are used as decorated noble metal. FE-SEM images illustrate the nano-in-microstructure of the engraved metal sheets. The decorated Au nanoparticles are uniform and fully cover on the rough metal sheet templates. From contact angle measurement with DI water, Zn+Au SERS provides the highest contact angle, which is 142.10 ± 0.51 degree. SERS performance, including Enhancement Factor (EF), Limit of Detection (LOD), and shelf-life are investigated. The EF values of Zn+Au SERS and Cu+Au SERS are 7.40 x 109 and 1.70 x 108, respectively. From LOD results, Zn+Au SERS presents the great ability to enhance the Raman signal at 10-7 molar concentration. However, after 90 days of shelf-life test, both of them shows the capability to enhance the Raman signal.

Downloads

Download data is not yet available.

References

C. Chakaja, S. Limwichean, N. Nuntawong, P. Eiamchai, S. Kalasung, O.-U Nimittrakoolchai, and N. Houngkamhang, “Study on detection of carbaryl pesticides by using surface-enhance raman spectroscopy,” Key Engineering Materials, vol. 853, pp. 97-101, 2020.

L. Wipawanee, S. Limwichean, N. Nuntawong, P. Eiamchai, S. Kalasung, O.-U Nimittrakoolchai, and Nongluck Houngkamhang, “Rapid detection of cypermethrin by using surface-enhanced raman scattering technique,” Key Engineering Materials vol. 853, pp. 102-106, 2020.

R. Botta, P. Eiamchai, M. Horprathum, S. Limwichean, C. Chananonnawathorn, V. Patthanasettakul, R. Maezono, A. Jomphoak, and N. Nuntawong, “3D structured laser engraves decorated with gold nanoparticle SERS chips for paraquat herbicide detection in environments,” Sensors and Actuators B: Chemical, vol. 304, p. 127327, 2020.

D. Maddipatla, F. Janabi, B. B. Narakathu, S. Ali, Vi. S. Turkani, B. J. Bazuin, P. D. Fleming, and M. Z. Atashbar, “Development of a novel wrinkle-structure based SERS substrate for drug detection applications,” Sensing and Bio-Sensing Research, vol. 24, p. 100281, 2019.

M. Liszewska, B. Bartosewicz, B. Budner, B. Nasiłowska, M. Szala, J. L. Weyher, I. Dzięcielewski, Z. Mierczyk, and B. J. Jankiewicz, “Evaluation of selected SERS substrates for trace detection of explosive materials using portable Raman systems,” Vibrational Spectroscopy, vol. 100, pp. 79-85, 2019.

M. Liu, and W. Chen, “Graphene nanosheets-supported Ag nanoparticles for ultrasensitive detection of TNT by surface-enhanced Raman spectroscopy,” Biosensors and Bioelectronics, vol. 46, pp. 68-73, 2013.

M. Mou, D. Chen, X. Wang, B. Zhang, T. He, H. Xin, and F. C. Liu, “SERS and UV spectra of meso-tetrakis (4-sulfonatophenyl)-porphine adsorbed on Ag2O colloids,” Chemical Physics Letters, vol. 179, no. 3, pp. 237-242, 1991.

M. Cyrankiewicz, T. Wybranowski, and S. Kruszewski, “Study of SERS efficiency of metallic colloidal systems,” Journal of Physics Conference Series, vol. 79, no. 1, p. 012013, 2007.

C. Kavitha, K. Bramhaiah, N. S. John, and B. E. Ramachandran, “Low cost, ultra-thin films of reduced graphene oxide–Ag nanoparticle hybrids as SERS based excellent dye sensors,” Chemical Physics Letters, vol. 629, pp. 81-86, 2015.

G. Weng, Y. Yang, J. Zhao, J. Li, J. Zhu, and J. Zhao, “Improving the SERS enhancement and reproducibility of inkjet-printed Au NP paper substrates by second growth of Ag nanoparticles,” Materials Chemistry and Physics, vol. 253, p. 123416, 2020.

R. Li, J. Lei, Y. Zhou, and H. Li, “Hybrid 3D SERS substrate for Raman spectroscopy.” Chemical Physics Letters, vol. 754, p. 137733, 2020.

A. K. Pal, S. Pagal, K. Prashanth, G. K. Chandra, S. Umapathy, and B. D. Mohan, “Ag/ZnO/Au 3D hybrid structured reusable SERS substrate as highly sensitive platform for DNA detection,” Sensors and Actuators B: Chemical, vol. 279, pp. 157-169, 2019.

X. Y. Zhao, G. Wang, and M. Hong, “Hybrid structures of Fe3O4 and Ag nanoparticles on Si nanopillar arrays substrate for SERS applications,” Materials Chemistry and Physics, vol. 214, pp. 377-382, 2018.

H. Qiu, M. Wang, L. Li, J. Li, Z. Yang, and M. Cao, “Hierarchical MoS2-microspheres decorated with 3D AuNPs arrays for high-efficiency SERS sensing,” Sensors and Actuators B: Chemical, vol. 255, pp. 1407-1414, 2018.

E. Ashok Kumar, N. Riswana Barveen, T. J. Wang, T. Kokulnathan, and Y. H. Chang, "Development of SERS platform based on ZnO multipods decorated with Ag nanospheres for detection of 4-nitrophenol and rhodamine 6G in real samples," Microchemical Journal, vol. 170, p. 106660, 2021.

Q. Wang, C. Zhang, T. Gong, W. Kong, W. Yue, W. Chen, Z. Xie, Y. Su, and L. Li, “Large-scale diamond silver nanoparticle arrays as uniform and sensitive SERS substrates fabricated by surface plasmon lithography technology,” Optics Communications, vol. 444, pp. 56-62, 2019.

I. Lettrichova, A. Laurencikova, D. Pudis, J. Novak, M. Goraus, J. Kovac, P. Gaso, and J. Nevrela, “2D periodic structures patterned on 3D surfaces by interference lithography for SERS,” Applied Surface Science, vol. 461, pp. 171-174, 2018.

T. Wu, and Y.-W. Lin, “Surface-enhanced Raman scattering active gold nanoparticle/nanohole arrays fabricated through electron beam lithography,” Applied Surface Science, vol. 435, pp. 1143-1149, 2018.

N. A. Cinel, S. Cakmakyapan, S. Butun, G. Ertas, E. Ozbay, “E-Beam lithography designed substrates for surface enhanced Raman spectroscopy,” Photonics and Nanostructures - Fundamentals and Applications, vol. 15, pp. 109-115, 2015.

R. M. Philip, and D. B. Mohan, “Investigation of chemical inertness of DC magnetron sputtered Bi thin films to the ambient conditions for SERS applications,” Materials Today: Proceedings, 2021.

L. Hu, X. Liu, G. Le, J. Li, F. Qu, S. Lu, and L. Qi, “Morphology evolution and SERS activity of the nanoporous Au prepared by dealloying sputtered Au-Ag film,” Physica B: Condensed Matter, vol. 558, pp. 49-53, 2019.

Y. Chen, and Y. Fang, “Surface enhanced Raman scattering (SERS) activity studies of Si, Fe, Ti, Al and Ag films’ prepared by magnetron sputtering,” Spectrochimica Acta Part A: Molecular and Biomolecular Spectroscopy, vol. 69, no. 3, pp. 733-737, 2008.

J. Li, and Y. Fang, “An investigation of the surface enhanced Raman scattering (SERS) from a new substrate of silver-modified silver electrode by magnetron sputtering,” Spectrochimica Acta Part A: Molecular and Biomolecular Spectroscopy, vol. 66, no. 4-5, pp. 994-1000, 2007.

F. Zhang, Y. Zhang, Y. Wang, and X. Zhao, “Composition-dependent LSPR shifts for co-sputtered TiS2-Ag,” Optics Communications, vol. 473, p. 125935, 2020.

L. Meng, S. Hu, C. Xu, X. Wang, H. Li, and X.Yan, “Surface enhanced Raman effect on CVD growth of WS2 film,” Chemical Physics Letters, vol. 707, pp. 71-74, 2018.

S.-T. Chen, Y.-C. Chu, C.-Y. Liu, C.-H. Huang, Y. Tzeng, “Surface-enhanced Raman spectroscopy for characterization of nanodiamond seeded substrates and ultrananocrystalline diamond at the early-stage of plasma CVD growth process,” Diamond and Related Materials, vol. 24, pp. 161-166, 2012

T. Li, Y. Xu, Y. Feng, C. Zhang, C. Yang, Z. Sun, H. Zhang, X. Yuan, T. Ning, and C. Yang, “Self-assembly of the stretchable AuNPs@MoS2@GF substrate for the SERS application,” Applied Surface Science, vol. 423, pp. 1072-1079, 2017.

T.-L. Guo, J.-G. Li, X. Sun, and Y. Sakka, “Photocatalytic growth of Ag nanocrystals on hydrothermally synthesized multiphasic TiO2/reduced graphene oxide (rGO) nanocomposites and their SERS performance,” Applied Surface Science, vol. 423, pp. 1-12, 2017.

T. Jiang, B. Wang, L. Zhang, and J. Zhou, “Hydrothermal synthesis of silver nanocubes with tunable edge lengths and their size dependent SERS behaviors,” Journal of Alloys and Compounds, vol. 632, pp. 140-146, 2015.

J. Singh, Rishikesh, S. Kumar, and R. Soni, “Synthesis of 3D-MoS2 nanoflowers with tunable surface area for the application in photocatalysis and SERS based sensing,” Journal of Alloys and Compounds, vol. 849, p. 156502, 2020.

C. Zanchi, L. Giuliani, A. Lucotti, M. Pistaffa, S. Trusso, F. Neri, M. Tommasini, and P.M. Ossi, “On the performance of laser-synthesized, SERS-based sensors for drug detection,” Applied Surface Science, vol. 507, pp. 145109, 2020.

P. Fu, X. Shi, F. Jiang, and X. Xu, “Superhydrophobic nanostructured copper substrate as sensitive SERS platform prepared by femtosecond laser pulses,” Applied Surface Science, vol. 501, pp. 144269, 2020.

W. Sun, R. Hong, Q. Liu, Z. Li, J. Shi, C. Tao, and D. Zhang, “SERS-active Ag–Al alloy nanoparticles with tunable surface plasmon resonance induced by laser ablation,” Optical Materials, vol. 96, pp. 109298, 2019.

K. K. Maniam and S. Paul, "Corrosion Performance of Electro-deposited Zinc and Zinc-Alloy Coatings in Marine Environment," Corrosion and Materials Degradation, vol. 2, no. 2, pp. 163-189, 2021.

Z. Wang, J. J. Wang, Y. Lai, Z. Wei, and J. Li, "Rapid detection of estrogen compounds using surface-enhanced Raman spectroscopy with a Zn/Au-Ag/Ag sandwich-structured substrate," Optical Materials, vol. 112, p. 110759, 2021.

K. Lv, H. Si, J. Liu, T. Zhu, Y. Xia, S. Chen, Y. Zhao, and C. Yang, “Plasmonic filters based on MoS2@Au/Ag hybrids: Controllable separation, preconcentration, and sensitive SERS detection,” Journal of Alloys and Compounds, vol. 846, p. 156438, 2020.

S. Kundu, W. Dai, Y. Chen, L. Ma, Y. Yue, A. M. Sinyukov, and H. Liang, “Shape- selective catalysis and surface enhanced Raman scattering studies using Ag nanocubes nanospheres and aggregated anisotropic nanostructures,” Journal of Colloid and Interface Science, vol. 498, pp. 248-262. 2017.

L. Wu, W. Zhang, C. Liu, M.F. Foda, and Y. Zhu, “Strawberry-like SiO2/Ag nanocomposites immersed filter paper as SERS substrate for acrylamide detection,” Food Chemistry, vol. 328, p. 127106, 2020.

Q. Li, S. Gong, H. Zhang, F. Huang, L. Zhang, and S. Li, 2019. “Tailored necklace-like Ag@ZIF-8 core/shell hetero-structure nanowires for high-performance plasmonic SERS detection,” Chemical Engineering Journal, vol. 371, pp. 26-33, 2019.

Downloads

Published

2021-12-16

How to Cite

[1]
N. PANGPAIBOON, “Raman Signal Enhancement of Low-Cost Metal Sheet SERS with Gold Decoration”, J Met Mater Miner, vol. 31, no. 4, pp. 33–39, Dec. 2021.

Issue

Section

Original Research Articles

Most read articles by the same author(s)