Metal and Alloys

17 รายการ

รายการทั้งหมด

  • Adhesive wear characteristics of mono and hybrid CF/Ep composite with nano-HAP filler

    Divya GURKAR SOMASHEKAR, Naveena BETTAHALLI ESWAREGOWDA, Suresha BHEEMAPPA
    2040
    DOI: https://doi.org/10.55713/jmmm.v34i3.2040
  • Controlling titanium incorporation in hydrogenated amorphous carbon films via closed-loop feedback in reactive high power impulse magnetron sputtering

    Pornthip RATCHAYOTEE, Artit CHINGSUNGNOEN, Phitsanu POOLCHARUANSIN
    2114
    DOI: https://doi.org/10.55713/jmmm.v34i4.2114
  • Development of forming limit diagrams for motorcycle fuel tank made from AA5754-O under deep drawing

    Phiraphong LARPPRASOETKUN, Jidapa LEELASEAT, Aeksuwat NAKWATTANASET, Surasak SURANUNTCHAI
    2013
    DOI: https://doi.org/10.55713/jmmm.v34i3.2013
  • Fabrication and characterization of Sb-doped MXene prepared by hydrothermal method for use as a sensing electrode for heavy metal detection

    Siranaree PHOOHADSUAN, Thitima Maturos DANIELS, Mati HORPRATHUM, Nichaphat THONGSAI, Eakkasit PUNRAT
    2008
    DOI: https://doi.org/10.55713/jmmm.v34i2.2008
  • Fabrication of porous geopolymers utilizing aluminum wastes as foaming agent

    Siriwan CHOKKHA, Jiratchaya AYAWANNA, Anurat POOWANCUM, Thanasak SINGLAEM, Pusit MITSOMWANG
    1966
    DOI: https://doi.org/10.55713/jmmm.v34i2.1966
  • High-performance NO2 gas sensor based on reduced graphene oxide/ZrO2 hybrids

    Ali Jabbar FRAIH, Nadia NAEEMA, Fatima Fadhil ABBAS
    2038
    DOI: https://doi.org/10.55713/jmmm.v34i3.2038
  • The Impact of hot rolling, Zn and Sn on the mechanical and corrosion characteristics of Mg-Zn-Ca alloys

    Halil EREN, Ali GÜNGÖR, Erkan KOÇ, Harun ÇUĞ
    2092
    DOI: https://doi.org/10.55713/jmmm.v34i4.2092
  • Investigating the oxidation behavior of Mg-Zn alloy: Effects of heating rates, gas flow, protective atmosphere, and alloy composition

    Tuğçe Nur SARAÇOĞLU, Safa POLAT, Erkan KOÇ, Muwafaq MASHRAH, Amir NAJAH SAUD, Marta MICHALSKA-DOMAŃSKA
    2033
    DOI: https://doi.org/10.55713/jmmm.v34i3.2033
  • Nutrient retention and availability of biochars prepared by co-pyrolysis of vinasse with sugarcane filter cake

    Siraprapra SUWANREE, Jesper T.N. KNIJNENBURG, Emirhan M. ÖLҪER, Kaewta JETSRISUPARB
    2147
    DOI: https://doi.org/10.55713/jmmm.v34i4.2147
  • Phase separation promotes FCC-phase mechanical twinning in AlCoCrFeMo0.05Ni2 high entropy alloy

    Zifeng ZHANG, Liang CHU, Jiqing ZHAO, Bing XU, Qilu YE
    2107
    DOI: https://doi.org/10.55713/jmmm.v34i3.2107
  • Recent advances in synthesis and bio-applications of natural stabilizers for metal nanoparticles

    Abhishek SHARMA, Navneet KAUR, Ayashkanta NANDA, Manvinder KAUR, Rajeev SHARMA, Harvinder Singh SOHAL
    2145
    DOI: https://doi.org/10.55713/jmmm.v34i4.2145
  • Single electrode mode triboelectric nanogenerator for recognition of animal sounds

    Archana PANDA, Kunal Kumar DAS, Kushal Ruthvik KAJA, Mohamed BELAL, Basanta Kumar PANIGRAHI
    2170
    DOI: https://doi.org/10.55713/jmmm.v34i4.2170
  • Structural, morphological, magnetic, and dielectric properties of copper-substituted Cu\(_{X}\)Zn\(_{(1-X)}\)Fe\(_{2}\)O\(_{4}\) nanoparticles: Green synthesis

    Gavisiddaiah HARISHA, Ramakrishnaiah THEJAS, B. Venkatagiriyappa PADMINI, Chinnappa Reddy DEVARAJA, Malalkere Veerappa MURUGENDRAPPA, Koppa Mahadevappa RAJASHEKARA
    1955
    DOI: https://doi.org/10.55713/jmmm.v34i3.1955
  • Surface characteristics evolution of 316L stainless steel induced by tension loading

    Kanokwan ANTANAM, Surasak KUIMALEE, Panya BUAHOMBURA, Waraporn PIYAWIT
    1982
    DOI: https://doi.org/10.55713/jmmm.v34i4.1982
  • Tin, silver, and copper sulfate compound extraction from lead-free solder dross by reduction with petroleum coke, electrorefining, cementation, and crystallization process

    Sakhob KHUMKOA, Natthicha MA-UD, Tapany PATCHARAWIT, Tanongsak YINGNAKORN
    2007
    DOI: https://doi.org/10.55713/jmmm.v34i4.2007
  • Use of commercial synthetic filament waste to reinforce biobased poly(butylene succinate) with the aid of compatibilizers

    Nattakarn HONGSRIPHAN, Alongkorn POPANNA
    1947
    DOI: https://doi.org/10.55713/jmmm.v34i3.1947
  • ZnO nanostructures synthesized by one-step sol-gel process using different zinc precursors

    Maneerat SONGPANIT, Kanokthip BOONYARATTANAKALIN, Wisanu PECHARAPA, Wanichaya MEKPRASART
    1968
    DOI: https://doi.org/10.55713/jmmm.v34i3.1968