Vol. 35 No. 1 (2025): March (Upcoming issue)

  

Published: 2025-02-21

Academic Articles

  • Hydroxyl combined with nitrogen on biomass carbon promotes the electrocatalytic H\(_{2}\)O\(_{2}\) selectivity

    Jiabi JIANG, Danni DENG, Yuchao WANG, Yingbi CHEN, Yu BAI, Meng WANG, Xiang XIONG, Yongpeng LEI
    e2216
    DOI: https://doi.org/10.55713/jmmm.v35i1.2216

Original Research Articles

  • The effects of starting microstructure on the results of double intercritical annealing process of 0.107%C-2.39%Mn-0.453%Si dual phase steel

    Wichayut CHUMOUNG, Nithi SAENARJHAN
    e2059
    DOI: https://doi.org/10.55713/jmmm.v35i1.2059

  • Investigation of photocathodic corrosion protection of ZnO/ZnS thin film for AISI 304 stainless steel in 3.5 wt% NaCl solution

    Soravid VEERAPONG, Naw Blessing OO, Boossayamas DACHBUMROONG, Parichart CHAUM, Thanate NA WICHEAN, Oratai JONGPRATEEP, Naray PEWNIM, Gasidit PANOMSUWAN, Ratchatee TECHAPIESANCHAROENKIJ
    e2105
    DOI: https://doi.org/10.55713/jmmm.v35i1.2105

  • Atmospheric corrosion of hot dip galvanized structural steel exposed to the tropical climate of Thailand

    Adithep BUNPHOT, Pakawat SANCHAROEN, Somnuk TANGTERMSIRIKUL, Taweep CHAISOMPHOB
    e2115
    DOI: https://doi.org/10.55713/jmmm.v35i1.2115

  • Arginine-modified surface coffee grounds activated carbon for Pb\(^{2+}\) adsorption: Kinetic, isotherm and thermodynamic studies

    Jarawee CHUPIROM, Sirikorn KHAOPHONG, Nopporn HEMYAKORN, Sonchai INTACHAI, Panita Kongsune
    e2148
    DOI: https://doi.org/10.55713/jmmm.v35i1.2148

  • Enhancement of cell viability of the (Ba,Ca)(Zr,Ti)O\(_{3}\) and hydroxyapatite composites for bone-repair applications

    Jirapa TANGSRITRAKUL, Manita BOONCHOO, Piyanan BOONPHAYAK, Paweena UPPANAN, Pakkanun KAEWKONG
    e2153
    DOI: https://doi.org/10.55713/jmmm.v35i1.2153

  • Enhanced photocatalytic reduction of Cr(VI) under visible light a magnetically separable TiO\(_{2}\)-Fe/Fe\(_{3}\)O\(_{4}\) photocatalyst prepared from iron rusty waste

    Khoirunisa KHOIRUNISA, Novianti Dwi LESTARI, Endang Tri WAHYUNI, Taufik Abdillah NATSIR
    e2162
    DOI: https://doi.org/10.55713/jmmm.v35i1.2162

  • Analyse the mechanical property optimization for FDM/3D-printed polycarbonate using Taguchi and TOPSIS techniques

    N. SRINIVASA RAO, Raman KUMAR, N. KAVITHA, Ramachandran T, Hari Prasadarao PYDI, Aman SHANKHYAN, Ram SUBBIAH, Vikasdeep Singh MANN
    e2196
    DOI: https://doi.org/10.55713/jmmm.v35i1.2196

  • Low-cost high performance sustainable triboelectric nanogenerator based on laboratory waste

    Archana PANDA, Kunal Kumar DAS, Kushal Ruthvik KAJA, Venkataramana GANDI, Sunit Gourav MOHANTY, Basanta Kumar PANIGRAHI
    e2226
    DOI: https://doi.org/10.55713/jmmm.v35i1.2226