Experimental and numerical characterization of fatigue crack propagation in high-speed railway wheel ER8 steel
DOI:
https://doi.org/10.55713/jmmm.v31i3.1139คำสำคัญ:
ER8 wheel steel, Fatigue crack growth, FE simulation, XFEMบทคัดย่อ
In this work, characteristics of fatigue crack growth in the Paris regime of the rail wheel steel grade ER8 were investigated. Experimental crack growth tests under different cyclic loads of a compact tension (CT) specimen and corresponding FE simulations were carried out. The extended FE method (XFEM) coupled with damage evolution based on the strain energy release rate or the Paris law was applied to describe the crack propagation mechanism in the tested CT samples. Hereby, the fatigue fracture model parameters were firstly determined from the experimental data. It was found that the predicted crack growth rates agreed well with the experimentally gathered results. Subsequently, fatigue crack propagations of the investigated wheel steel under varying load levels, load ratios and lengths of pre-crack were studied using the FE approach and the obtained crack growth characteristics were compared and discussed.
Downloads
เอกสารอ้างอิง
V. Esslinger, R. Kieselbach, R. Koller, and B. Weisse, “The railway accident of Eschede –Technical background,” Engineering Failure Analysis, vol. 11, no. 4, pp. 515-535, 2004. DOI: https://doi.org/10.1016/j.engfailanal.2003.11.001
D. F. C. Peixoto, and P. M. S. T. de Castro, “Fatigue crack growth of a railway wheel,” Engineering Failure Analysis, vol. 82, pp. 420–434, 2017. DOI: https://doi.org/10.1016/j.engfailanal.2017.07.036
D. F. Zeng, L. T. Lu, Y. H. Gong, N. Zhang, and Y. B. Gong, “Optimization of strength and toughness of railway wheel steel by alloy design,” Material and Design, vol. 92, pp. 998-1006, 2016. DOI: https://doi.org/10.1016/j.matdes.2015.12.096
X. Y. Fang, Y. X. Zhao, and H. W. Liu, “Study on fatigue failure mechanism at various temperatures of a high-speed railway wheel steel,” Materials Science and Engineering A, vol. 696, pp. 299-314, 2017. DOI: https://doi.org/10.1016/j.msea.2017.04.042
G. Z. Zhang, C. P. Liu, R. M. Ren, S. Wu, H. X. Yin, T. Cong, and X. Li, “Effect of non-uniform microstructure on wear property of ER8 wheel steel,” Wear, vol. 458-459, 203416, 2020. DOI: https://doi.org/10.1016/j.wear.2020.203416
Q. S. Zhang, I. Toda-Caraballo, Q. Li, J. C. Han, J. Han, J. W. Zhao, and G. Z. Dai, “Tension-shear multiaxial fatigue damage behavior of high-speed railway wheel rim steel,” International Journal of Fatigue, vol. 133, 105416, 2020. DOI: https://doi.org/10.1016/j.ijfatigue.2019.105416
S. Mazlan, N. Yidris, R. Zahari, E. Gires, D. L. A. Majid, and K. A. Ahmad, “Prediction of fatigue life of aluminum 2024-T3 at low temperature by finite element analysis,” Journal of Mechanical Engineering Science, vol. 14, no. 3, pp. 7170-7180, 2020. DOI: https://doi.org/10.15282/jmes.14.3.2020.18.0563
J. C. Martínez, L. V. V. Useche, and M. A. Wahab, “Numerical prediction of fretting fatigue crack trajectory in a railway axle using XFEM,” International Journal of Fatigue, vol. 100, pp. 32-49, 2017. DOI: https://doi.org/10.1016/j.ijfatigue.2017.03.009
A. Bergara, J. I. Dorado, A. Martín-Meizoso, and J. M. Martínez-Esnaola, “Fatigue crack propagation in complex stress fields: experiments and numerical simulations using the extended finite element method (XFEM),” International Journal of Fatigue, vol. 103, pp. 112-121, 2017.. DOI: https://doi.org/10.1016/j.ijfatigue.2017.05.026
M. Naderi, and N. Iyyer, “Fatigue life prediction of cracked attachment lugs using XFEM,” International Journal of Fatigue, vol. 77, pp. 186-193, 2015. DOI: https://doi.org/10.1016/j.ijfatigue.2015.02.021
S. R. Vempati, K. B. Raju, and K. V. Subbaiah, “Simulation of Ti-6Al-4V cruciform welded joints subjected to fatigue load using XFEM,” Journal of Mechanical Engineering Science, vol. 13, no. 3, pp. 5371-5389, 2019. DOI: https://doi.org/10.15282/jmes.13.3.2019.11.0437
A. A. Rad, M. R. Forouzan, and A. S. Dolatabadi, “Three-dimensional fatigue crack growth modelling in a helical gear using extended finite element method,” Fatigue and Fracture Engineering Materials Structure, vol. 37, pp. 581-591, 2014. DOI: https://doi.org/10.1111/ffe.12140
A. M. Alshoaibi, and Y. A. Fageehi, “2D finite element simulation of mixed mode fatigue crack propagation for CTS specimen,” Journal of Materials Research Technology, vol. 9, no. 4, pp. 7850-7861, 2020. DOI: https://doi.org/10.1016/j.jmrt.2020.04.083
M. A. Salehnejad, A. Mohammadi, M. Rezaei, and H. Ahangari, “Cracking failure analysis of an engine exhaust manifold at high temperatures based on critical fracture toughness and FE simulation approach,” Engineering Fracture Mechanics, vol. 211, pp. 125-136, 2019. DOI: https://doi.org/10.1016/j.engfracmech.2019.02.005
M. Mlikota, S. Staib, S. Schmauder, and Z. Božić, “Numerical determination of Paris law constants for carbon steel using a two-scale model,” Journal of Physics: Conference Series, vol. 843, pp. 012042, 2017. DOI: https://doi.org/10.1088/1742-6596/843/1/012042
M. Mlikota, S. Schmauder, and Z. Božić, “Calculation of the Woehler (S-N) curve using a two-scale model,” International Journal of Fatigue, vol. 114, pp. 289-297, 2018. DOI: https://doi.org/10.1016/j.ijfatigue.2018.03.018
V. K. Goyal, and R. Jorge, “Micro-scale crack propagation using the eXtended finite element method,” in Proceedings of the 57th AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference. San Diego, California, USA: 4-8 January 2016. DOI: https://doi.org/10.2514/6.2016-0729
R. Dekker, F. P. Van der Meer, J. Maljaars, and L. J. Sluys, “A cohesive XFEM model for simulating fatigue crack growth under mixed-mode loading and overloading,” International Journal of Numerical Methods Engineering, vol. 118, pp. 561-577, 2019. DOI: https://doi.org/10.1002/nme.6026
Y. Wei, and Y. Jiang, “Fatigue fracture analysis of gear teeth using XFEM,” Transactions of Nonferrous Metals Society of China, vol. 29, no. 10, pp. 2099-2108, 2019. DOI: https://doi.org/10.1016/S1003-6326(19)65116-2
ASTM, Standard test method for measurement of fatigue crack growth rates, E647, American Society for Testing and Materials (2008).
A. Negi, G. Bhaedwaj, J. S. Saini, and N. Grover, “Crack growth analysis of carbon nanotube reinforced polymer nano-composite using extended finite element method,” Journal of Mechanical Engineering Science, pp. 1-21, 2021.
ดาวน์โหลด
เผยแพร่แล้ว
วิธีการอ้างอิง
ฉบับ
บท
การอนุญาต
ลิขสิทธิ์ (c) 2021 Journal of Metals, Materials and Minerals
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Authors who publish in this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
