Vol. 32 No. 1 (2022)

Published: 2022-03-29

Review Articles

  • Protocols of improvements for PMMA denture base resin: An overview

    DOI: https://doi.org/10.55713/jmmm.v32i1.1245
    Nidal W. Elshereksi, Fathie A. Kundie , Andanastuti Muchtar, Che H. Azhari
    1-11

Original Research Articles

  • Evaluation of static recrystallization and grain growth kinetics of hot-rolled AZ31 alloy

    DOI: https://doi.org/10.55713/jmmm.v32i1.1241
    Salaheddine Sadi, Abdelkader Hanna, Thierr Baudin, Anne-Laure Helbert, François Brisset, Djamel Bradai, Hiba Azzeddine
    12-26

  • Bio-composite of nipa palm husk derived activated carbon/poly(butylene succinate): an effective agricultural waste based adsorbent for ammonia removal

    DOI: https://doi.org/10.55713/jmmm.v32i1.1248
    Chaichana PIYAMAWADEE, Viboon SRICHAROENCHAIKUL, Duangdao AHT-ONG
    27-40

  • Effect of Al Addition on Crystal Structure of AlGaN/GaN on GaAs (001) Substrate Grown by Metalorganic Vapor Phase Epitaxy

    DOI: https://doi.org/10.55713/jmmm.v32i1.1240
    Nattamon SUWANNAHARN, Sakuntam SANORPIM, Suphakan KIJAMNAJSUK, Visittapong YORDSRI, Noppadon NUNTAWONG, Kentaro ONABE
    41-47

  • Facile synthesis of heterostructured g-C3N4/Ag -TiO2 photocatalysts with enhanced visible-light photocatalytic performance

    DOI: https://doi.org/10.55713/jmmm.v32i1.1246
    Chonnipha TANGWONGPUTTI, Prasert REUBROYCHAROEN, Pornapa SUJARIDWORAKUN
    48-54

  • Effect of pre-carbonization temperature on the porous structure and electrochemical properties of activated carbon fibers derived from kapok for supercapacitor applications

    DOI: https://doi.org/10.55713/jmmm.v32i1.1247
    Nu Myat THAZIN, Nattapat CHAIAMMART, Myo Myo THU, Gasidit PANOMSUWAN
    55-64

  • Effects of milling time on sintering properties and formation of interface Al4C3 on graphite reinforced Al-4.5Cu-1.5Mg nanocomposite

    DOI: https://doi.org/10.55713/jmmm.v32i1.1132
    Angga Khairul Fahmi, Haris Rudianto, Agus Sukarto Wismogroho, Wahyu Bambang Widayatno, Didik Aryanto, Bambang Hermanto
    65-71

  • Influence of six-step heat treatment on microstructures and mechanical properties of 5160 alloy steel

    DOI: https://doi.org/10.55713/jmmm.v32i1.1141
    Pattama APICHAI
    72-78

  • Biodiesel production from waste cooking oil using a new heterogeneous catalyst SrO doped CaO nanoparticles

    DOI: https://doi.org/10.55713/jmmm.v32i1.1149
    Apisit Prokaewa, Siwaporn Meejoo Smith, Apanee Luengnaruemitchai, Mathi Kandiah, Supakorn boonyuen
    79-85

  • Sintering behavior of nanostructured β-CPP powder obtained from avian eggshell waste

    DOI: https://doi.org/10.55713/jmmm.v32i1.1171
    Bruno Silvano SILVA, Tarcília Henrique Amaral Correa, Rômulo Leite LOIOLA, José Nilson França HOLANDA
    86-92

  • Utilization of silicon dioxide powder from industrial wastes as novel filler in rubber isolator application

    DOI: https://doi.org/10.55713/jmmm.v32i1.1205
    Amorn AJINSAMAJAN, Adisai RUNGVICHANIWAT; Anuwat SAETUNG
    93-100

  • Study of the effect of pH, conditioning and flotation time on the flotation efficiency of phosphate ores by a soybean oil collector

    DOI: https://doi.org/10.55713/jmmm.v32i1.1212
    Zohra FARID, Mohamed ABDENNOURI, Noureddine BARKA, Youness JANNANI, M'hamed SADIQ
    101-108

  • The finished polyester fabric with hot NH4OH pretreatment and mixed ZnO-Zn(OH)2 nanoparticles for hydrophobic property

    DOI: https://doi.org/10.55713/jmmm.v32i1.1226
    Samroeng NARAKAEW, Sittipong AU-PREE, Wipanoot BAISON, Siwat THUNGPRASERT, Itsariya WATTALO, Pranpreeya JAIPOR, Theeraporn PROMANAN, Sukee SUKDEE, Pakorn SANTAKIJ, Chainet CHANOGKUN, Kanjana RUTTANATEERAWICHIEN, Aphiruk CHAISENA, Pattama APICHAI, Phiphop NARAKAEW
    109-117

  • Epoxidized natural rubber/silane modified silica nanocomposites prepared in latex stage

    DOI: https://doi.org/10.55713/jmmm.v32i1.1242
    Supat MOOLSIN, Duangkamon SAWANGKAN
    118-123

  • Synthesis and phosphate adsorption performance of elephant dung biochar modified with magnesium and iron

    DOI: https://doi.org/10.55713/jmmm.v32i1.1243
    Navod ABEYSINGHE, Kaewta JETSRISUPARB, K.H.T. KARUNARATHNA, E.P.S. CHANDANA, Siraprapa SUWANREE, Pornnapa KASEMSIRI, Prinya CHINDAPRASIRT, Jesper T.N. KNIJNENBURG
    124-133

  • Use of oil palm frond waste to reinforce poly(lactic acid) based composites with the improvement of interfacial adhesion by alkali treatment

    DOI: https://doi.org/10.55713/jmmm.v32i1.1244
    Nattakarn HONGSRIPHAN, Jidapa SUBSANGA, Pimpisa SUEBSAI, Sunisa SITTHIPONG, Pajaera PATANATHABUTR
    134-143

  • Design, development and characterization of a mid-frequency (35 khz) tonpilz transducer array from 0.675PMN-0.325PT piezoceramics

    DOI: https://doi.org/10.55713/jmmm.v32i1.1249
    Merve Nur ÇİFTÇİ, Berk DEĞİRMENCİ, Irem BÖBREK, Sedat ALKOY, Aykut AYKAÇ, Muhammet BOZ, Ayşe BERKSOY-YAVUZ, Ezgi YALCIN, Namik K. GOZUACIK, Ebru MENŞUR
    144-149