ปีที่ 32 ฉบับที่ 4 (2022)

เผยแพร่แล้ว: 2022-12-26

บทความปริทรรศน์

  • Hole transport layers in organic solar cells: A review

    Riva ALKARSIFI, Jörg ACKERMANN, Olivier MARGEAT
    1-22
    DOI: https://doi.org/10.55713/jmmm.v32i4.1549

  • Research progress of novel zirconium alloys with high strength and toughness

    Na ZHANG, Chaoqun XIA, Jiaqian QIN, Qiang LI, Xinyu ZHANG, Riping LIU
    23-36
    DOI: https://doi.org/10.55713/jmmm.v32i4.1526

  • Rice husk ash utilization, composition and properties: A brief review

    Vignesh Nayak Ullal, Shivaramu H T, Aveen K P
    37-46
    DOI: https://doi.org/10.55713/jmmm.v32i4.1544

Original Research Articles

  • Extraction of lutein dye from Tagetes erecta garland waste for green dyeing of hemp fabric using response surface methodology

    Pisutsaran CHITICHOTPANYA, Nattaya VUTHIGANOND, Thitirat INPRASIT, Benjamas KLAYKRUAYAT, Seranee SRISUK
    47-58
    DOI: https://doi.org/10.55713/jmmm.v32i4.1527

  • A holistic review on the synthesis techniques of spinel structured lithium cobalt manganese tetroxide

    Chee Wayne TAN, Zul Hilmi CHE DAUD, Zainab ASUS, Mohd Hasbullah IDRIS, Izhari Izmi MAZALI, Mohd Ibthisham ARDANI, Mohd Kameil ABDUL HAMID
    59-70
    DOI: https://doi.org/10.55713/jmmm.v32i4.1528

  • Ecological dyeing of acrylic yarn with colorant derived from natural lac dye

    Nattaya VUTHIGANOND, Pisutsaran CHITICHOTPANYA, Monthon NAKPATHOM, Rattanaphol MONGKHOLRATTANASIT
    71-78
    DOI: https://doi.org/10.55713/jmmm.v32i4.1529

  • Development of FexOy particle onto bacterial cellulose network by forced hydrolysis and its electrical conductivity

    Prompong KHAMWONGSA, Poramed WONGJOM, Andi Magattang Gafur MUCHLISC, Chun Che LIN, Seranee SRISUK, Sarute UMMARTYOTIN
    79-86
    DOI: https://doi.org/10.55713/jmmm.v32i4.1530

  • Morphology and electrochromic property of chemical bath deposited NiO films at different NiSO4 concentration

    Watcharaporn THONGJOON, Kamon AIEMPANAKIT, Itsarapong CHUASONTIA, Chantana AIEMPANAKIT
    87-92
    DOI: https://doi.org/10.55713/jmmm.v32i4.1534

  • Preparation of bacterial cellulose film from rotten fruits for mulching film application

    Nattapong PINPRU, Varol INTASANTA, Thitirat CHAROONSUK, Supharada KHAISAAT, Oubonwan SAWANAKARN, Naratip VITTAYAKORN, Somsak WORAMONGKOLCHAI
    93-101
    DOI: https://doi.org/10.55713/jmmm.v32i4.1535

  • Effect of pore modifiers on physical and mechanical properties of high-performance cement mortar

    Kisun CHUNTI, Sureerat POLSILAPA, Parinya CHAKARTNARODOME, Passakorn SONPRASARN, Wichit PRAKAYPAN, Edward A. LAITILA
    102-108
    DOI: https://doi.org/10.55713/jmmm.v32i4.1536

  • The effects of double intercritical annealing on microstructure and mechanical properties of 0.107C-2.39Mn-0.453Si dual phase steel

    Nithi SAENARJHAN, Gobboon LOTHONGKUM, Jatupon OPAPAIBOON
    109-117
    DOI: https://doi.org/10.55713/jmmm.v32i4.1537

  • Optimized parameter of dissimilar joining between Al6061-T6 and height-strength steel with friction stir spot welding process (FSSW)

    Anusak SILACHAI, Suriya PRASOMTHONG
    118-127
    DOI: https://doi.org/10.55713/jmmm.v32i4.1538

  • Utilization of rubber tree bark as a carbon source for electric arc furnace steelmaking: Carbon/slag interaction at 1550℃

    Wasutha BANDITYARUCK, Weerayut SRICHAISIRIWAECH, Somyote KONGKARAT
    128-133
    DOI: https://doi.org/10.55713/jmmm.v32i4.1539

  • Green acidic catalyst from cellulose extracted from sugarcane bagasse through pretreatment by electron beam irradiation and subsequent sulfonation for sugar production

    Thitirat RATTANAWONGWIBOON, Prim CHANKLINHORM, Threeraphat CHUTIMASAKUL, Tanagorn KWAMMAN, Wilasinee KINGKAM, Rattapon KHAMLUE, Sarute UMMARTYOTIN
    134-142
    DOI: https://doi.org/10.55713/jmmm.v32i4.1540

  • Synthesis and characterization of hybrid shell microcapsules for anti-corrosion Ni-Co coating

    Hamed SADABADI, Saeed Reza ALLAHKARAM, Omid GHADER, Pradeep K. ROHATGI
    143-149
    DOI: https://doi.org/10.55713/jmmm.v32i4.1541

  • Sugarcane waste-derived activated carbon for lithium-sulfur batteries with enhanced performance by thiourea doping

    Yanisa THUMKAEW, Vipada PETSON, Thanapat JORN-AM, Natee SIRISIT, Chalathorn CHANTHAD, Jedsada MANYAM, Xiao LIANG, Shufeng SONG, Peerasak PAOPRASERT
    150-160
    DOI: https://doi.org/10.55713/jmmm.v32i4.1542

  • Preparation of spent coffee grounds-rubber composites using natural rubber latex as binder

    Varittha MITSAICHON, Kanok-on RUAESRIJAN, Pranee PHINYOCHEEP, Taweechai AMORNSAKCHAI, Preeyanuch JUNKONG, Sombat THANAWAN
    161-166
    DOI: https://doi.org/10.55713/jmmm.v32i4.1543

  • Dyeing of curcumin and durable press finishing with citric acid on cotton fabric using one step process

    Supannee BOONROENG, Piyaporn KAMPEERAPAPPUN
    167-173
    DOI: https://doi.org/10.55713/jmmm.v32i4.1548

  • Mineralogical studies and optimization of tabling parameters of low grade chromite ore by box behnken design of experiments

    Amit Kumar BHANDARY, Siddhartha MUKHERJEE, Rajib DEY, Mahua Ghosh CHAUDHURI
    174-185
    DOI: https://doi.org/10.55713/jmmm.v32i4.1563

  • Magnetic nanoparticles coated with zwitterionic copolymer as an advanced material for rapid and instrument-free biomolecular detection in human serum

    Supannika BOONJAMNIAN, Varunee SADSRI, Voravee P. HOVEN, Piyaporn NA NONGKHAI
    186-193
    DOI: https://doi.org/10.55713/jmmm.v32i4.1572

Erratum