, India
-
Journal of Metals, Materials and Minerals Vol. 31 No. 1 (2021) - Original Research Articles
Efficiency of Tri-n-octylamine for the liquid-liquid extraction of Co (II) from acidic chloride medium
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 31 No. 2 (2021) - Original Research Articles
Synthesis of a two-part geopolymer from red mud and silica fume
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 31 No. 2 (2021) - Original Research Articles
Effect of micro graphite particles on the microstructure and mechanical behavior of aluminium 6061 (Al-Mg-Si) alloy composites developed by novel two step casting technique
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 31 No. 3 (2021) - Review Articles
New views on the ingenious applications of Ag nanoparticles as a sensor for antibiotic detection and as a potent antimicrobial agent
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 31 No. 3 (2021) - Original Research Articles
Efficiency of 2-dodecylaminopyridine for the liquid-liquid extraction of gold(III) from succinic acid medium
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 31 No. 4 (2021) - Original Research Articles
Structural, magnetic and transport properties of Ca and Sr doped Lanthanum manganites
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 31 No. 3 (2021) - Original Research Articles
Effect of cladding of stellite-6 filler wire on the surface of ss316l alloy through cold metal arc transfer process
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 31 No. 4 (2021) - Original Research Articles
Mechanical performance of woven carbon reinforced epoxy composites with varied orientation angle
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 31 No. 4 (2021) - Original Research Articles
Luminescent properties of polyaniline capped Mn doped ZnS quantum dots
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 32 No. 2 (2022) - Original Research Articles
Elastic properties of boro-tellurite glasses doped with europium oxide
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 32 No. 2 (2022) - Original Research Articles
DC Conductivity of Heavy Metal Oxide (Bi2O3) Boro-Tellurite Glasses: Effect of Eu2O3
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 32 No. 3 (2022) - Original Research Articles
A molecular dynamics simulation study to investigate the effect of C60 on thermo- mechanical and elastic properties of DGEBA/DETA nanocomposites
Abstract PDF Supplementary A -
Journal of Metals, Materials and Minerals Vol. 32 No. 3 (2022) - Original Research Articles
Sm3+ doped Mn-Zn mixed ferrites: Synthesis and characterization
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 32 No. 3 (2022) - Original Research Articles
Effect of A-site modification on structural and microwave dielectric properties of calcium titanate
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 32 No. 4 (2022) - Review Articles
Rice husk ash utilization, composition and properties: A brief review
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 32 No. 4 (2022) - Original Research Articles
Mineralogical studies and optimization of tabling parameters of low grade chromite ore by box behnken design of experiments
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 33 No. 2 (2023): June - Original Research Articles
Effect of nano CdO-ZnO content on structural, thermal, optical, mechanical and electrical properties of epoxy composites
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 33 No. 2 (2023): June - Review Articles
pH-responsive polymeric nanostructures for cancer theranostics
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 33 No. 2 (2023): June - Original Research Articles
Investigations of structural modifications, physical and optical properties of lead boro-tellurite glasses doped with europium trioxide for possible optical switching applications
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 33 No. 4 (2023): December - Review Articles
Growth of proton conducting strontium cerate composites
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 33 No. 4 (2023): December - Review Articles
Dispersion mechanism of nanoparticles and its role on mechanical, thermal and electrical properties of epoxy nanocomposites - A Review
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 33 No. 4 (2023): December - Review Articles
Review of materials, functional components, fabrication technologies and assembling characteristics for polymer electrolyte membrane fuel cells (PEMFCs) – An update
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 33 No. 4 (2023): December - Original Research Articles
Structural and electrical properties of 0.98(KO\(_{0.5}\)NaO\(_{0.5}\)NbOO\(_{3}\))-0.02(BiO\(_{0.5}\)NaO\(_{0.5}\)TiOO\(_{3}\)) ceramics
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 34 No. 1 (2024): March - Original Research Articles
Photocatalytic degradation of ciprofloxacin drug utilizing novel PVDF/polyaniline/ lanthanum strontium manganate@Ag composites
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 34 No. 1 (2024): March - Original Research Articles
Microstructural and dielectric characteristics of the Ce-doped Bi\(_{2}\)FeMnO\(_{6}\)
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 23 No. 1 (2013) - Original Research Articles
Low temperature chemical precipitation and characterization of ceria based ceramic composite oxide materials
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 22 No. 2 (2012) - Original Research Articles
Study of effect of temperature on the synthesis of carbon nanotubes by floating catalyst method
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 23 No. 2 (2013) - Original Research Articles
Heat treatment of steel parts in different media
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 23 No. 2 (2013) - Original Research Articles
Dolomite stabilized zirconia for refractory application : Part-I phase analysis, densification behavior and microstructure of partial stabilized zirconia
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 23 No. 1 (2013) - Original Research Articles
Macrostructure modeling of Al-20 % Sn alloy
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 24 No. 1 (2014) - Original Research Articles
Corrosion study on low alloy high phosphorus steel
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 24 No. 2 (2014) - Original Research Articles
Corrosion behaviour of high phosphorus containing Cu-Cr weather resistance steel
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 25 No. 2 (2015) - Original Research Articles
Effect on mechanical properties of aluminium alloy composites on adding ash as reinforcement material
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 25 No. 2 (2015) - Original Research Articles
Effect of Ni on the formability and texture of hot rolled weathering steel
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 25 No. 2 (2015) - Original Research Articles
Processing of nano fillers in nitrile rubber – A novel technique
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 26 No. 2 (2016) - Original Research Articles
Compressive properties and imaging analysis of a new metal foam-natural rubber hybrid structure
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 26 No. 2 (2016) - Review Articles
Hot ductility and hot-shortness of steel and measurement techniques: A review
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 21 No. 1 (2011) - Original Research Articles
Development of composition modulated multilayer alloy coatings and their corrosion behavior
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 21 No. 2 (2011) - Original Research Articles
4-(N,N-diethylamino)benzaldehyde thiosemicarbazone as corrosion inhibitor for 6061 Al - 15 vol. pct. SiC(p) composite and its base alloy
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 21 No. 2 (2011) - Original Research Articles
Synthesis of aligned carbon nanotubes by floating catalyst method using ferrocene
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 20 No. 2 (2010) - Original Research Articles
Development of layered Zn-Fe coatings for better corrosion protection
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 19 No. 2 (2009) - Original Research Articles
A simple method for production of humidity indicating silica gel from rice husk ash
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 28 No. 1 (2018) - Review Articles
Recent developments in the field of metal foam-polymer hybrid materials: A brief overview
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 28 No. 1 (2018) - Original Research Articles
Effect of tempering temperature on microstructure and mechanical properties of low alloy steel in quenched tempered conditions
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 28 No. 1 (2018) - Original Research Articles
Investigation of erosive wear behaviour of tungsten carbide cobalt coated metal matrix composites using ANN
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 29 No. 2 (2019) - Original Research Articles
Effect of post weld heat treatment soaking time on microstructure and mechanical properties of TIG welded grade 91 steel
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 29 No. 4 (2019) - Original Research Articles
Study on mechanical and viscoelastic behavior of carbon nanotube (CNT) reinforced Epofine1564 nanocomposite
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 29 No. 2 (2019) - Review Articles
Corrosion of ECAPed Magnesium alloys and its background: A review
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 29 No. 4 (2019) - Original Research Articles
Utilization of RHA in development of hybrid composite by electromagnetic stir casting technique using RSM
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 30 No. 1 (2020) - Review Articles
Selection of blowing agent for metal foam production: A review
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 30 No. 2 (2020) - Review Articles
Ceramic and glass-ceramic fillers in dental composites - A review
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 30 No. 4 (2020) - Original Research Articles
Mechanical characterization and wear behavior of aerospace alloy AA2124 and micro B4C reinforced metal composites
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 30 No. 4 (2020) - Original Research Articles
Impact of boron carbide and graphite dual particulates addition on wear behavior of A356 alloy metal matrix composites
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 30 No. 2 (2020) - Original Research Articles
Synthesis and characterization of ball-milled eggshell and Al2O3 reinforced hybrid green composite material
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 30 No. 3 (2020) - Original Research Articles
Corrosion and cavitation erosion properties of sub-micron WC-Co /Cr3C2-NiCr multi-layered coating on aluminium substrates
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 30 No. 4 (2020) - Original Research Articles
Soldering of copper using graphene-phosphoric acid gel
Abstract PDF Supplementary A -
Journal of Metals, Materials and Minerals Vol. 31 No. 1 (2021) - Review Articles
Lightning strike response of composite structures: A review
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 30 No. 3 (2020) - Original Research Articles
Observation of structural, spectral characterizations and correlation of physical parameters on VO2+ ions doped Cadmium Lithium Sodium Borate glasses
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 30 No. 3 (2020) - Original Research Articles
Optimization of wet sliding wear parameters of Titanium grade 2 and grade 5 bioimplant materials for orthopedic application using Taguchi method
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 31 No. 1 (2021) - Original Research Articles
Wear behavior of Aluminium 6061 alloy reinforced with coated/uncoated multiwalled carbon nanotube and graphene
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 30 No. 4 (2020) - Review Articles
Quenched and tempered high strength steel: A review
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 31 No. 3 (2021) - Original Research Articles
Development and characterization of SiC fiber reinforced B4C composite
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 13 No. 1 (2003) - Original Research Articles
Synthesized nanocomposite TiN/a-SiNx films
Abstract PDF